• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.1
• /
• pp.17-25
• /
• 2016

This paper proposes an ultra-low power design methodology for asynchronous circuits which combines with power switch structure used for reducing leakage current in the synchronous circuits. Compared to existing delay-insensitive asynchronous circuits such as static NCL and semi-static NCL, the proposed methodology provides the leakage power reduction in the NULL mode due to the high Vth of the power switches and the switching power reduction at the switching moment due to the smaller area even though it has a reasonable speed penalty. Therefore, it will become a low power design methodology required for IoT system design placing more value on power than speed. In this paper, the proposed methodology has been evaluated by a $4{\times}4$ multiplier designed using 0.11 um CMOS technology, and the simulation results have been compared to the conventional asynchronous circuits in terms of circuit delay, area, switching power and leakage power.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.1 no.1
• /
• pp.1-7
• /
• 2006

In this paper, a novel power management structure for an energy harvesting pervasive system is proposed. The system considers the power state of each subsystem to assign proper power sources. The switch matrix structure utilizes each power source to reduce the peak current of the battery. The power management structure can be interfaced to an embedded system power supply without significant design change.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.625-628
• /
• 1989

광섬유와 micro변형기를 이용하여 다점 압력 계측 system을 구성하여 실험을 행하였다. 그 결과 pulse generator와 analog switch를 이용함으로써 100ns의 광 pulse를 쉽게 얻을 수 있었으며, 또한 3개의 광 pulse를 analog switch를 이용하여 쉽게 분리할 수 있었다. 한편 변형기에 가한 힘과 광 손실간의 상관관계를 이론치와 비교하여 조사한 결과 힘과 광손실간의 상관관계는 이론치와 실험치가 유사한 경향을 나타내는 것을 알 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1079-1081
• /
• 1999

This paper presents the standard for dividing/tieing the distribution lines and installing optimally the automated distribution switch-gear in multi-line faults. Also this paper recommends the distribution system design in consideration of the live load transfer of the concentrated load in the last load-side. This recommendation will be useful for designing the distribution network, developing the feeder automation software and operating the distribution automation system.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.159-162
• /
• 2001

AAL2 is an adaptation layer that is supposed to support delay-sensitive applications with low bit-rate, short, variable packet length in a bandwidth-efficient way. For the switching of AAL2 service channels, AAL2 network is needed, which consists of AAL2 switching nodes. In this paper, The architecture of the unit AAL2 switch is proposed and the performance is analyzed in the CDMA environment.

• Proceedings of the KIPE Conference
• /
• 2004.11a
• /
• pp.85-89
• /
• 2004

This paper presents Power Control and Distribution Unit development of GEO satellite with 3kW power output. The sensing error of bus voltage produce control signal of the shunt switch assembly and battery power converter, and the tolerance of error signals generated decide the stability of proposed system. The dynamic characteristics of main bus according to the load changing and the control logic of FPGA are simulated. In order to verify the proposed design, the simulation and experimental results for solar array shunt switch, battery power converter and bus controller are shown.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1196-1202
• /
• 2005

In the case of the monorail or maglev system, the whole guideway itself in the switching region has to be moved to allow the vehicles to change the track without stopping the run. In this paper we discuss what has to be considered in the design of the EMS type maglev guideway switches and report the development status quo of the maglev guideway switch of Korean maglev UTM-01.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.788-791
• /
• 2004

임베디드 리눅스를 이용한 원격 제어 전기 스위치를 개발한다. 산업 전반에 널리 보급된 인터넷을 이용하여 실시간으로 원격 전기 스위치 기기의 상태를 파악하고 제어함으로서 시간과 공간 및 비용 절감이라는 측면에서 효과를 볼 수 있다. 본 논문에서 설계된 원격 전기 스위치의 서버는 MPC860으로 구성되어 임베디드 리눅스가 포팅되었다. 클라이언트는 서버의 웹 페이지를 접속함으로서 전자 스위치를 원격 관리를 할 수 있게 HTML과 자바로 설계되어 있다. 하나의 서버는 마스트로서 다수의 슬레이브를 가지고 있으며 슬레이브는 전기스위치들과 아날로그 채널로 구성되어 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.11
• /
• pp.27-33
• /
• 2003

This paper proposes the efficient audit method for the distributed connection information in ATM switch. Based on this method, we design the periodic audit function by a system and immediate audit function by a operator's order. We evaluate the performance about the proposed Audit method. At the result of evaluation, We figure out that the load of call control processor is almost independent of a system load regardless of audit function operation. Therefore, we confirm that the proposed audit method nearly have an effect on the load of call control processor. The proposed audit method can reestablish a Mismatched connection information with a little load.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.201.2-201.2
• /
• 2016

The triggered vacuum switch (TVS) is widely used as a high power switch in the field of pulsed power application. TVS can produce current of higher than 100 kA within a microsecond after being triggered. A triggering high voltage pulse generator supplies a high voltage signal to the trigger system to initiate the discharge between a trigger pin and one of main electrode. The trigger system, which consists of a tungsten trigger electrode and cylindrical ceramic insulator around it, is normally installed at the center of main cathode electrode. The discharging characteristics of the trigger system strongly depend on the geometry, electrode material, vacuum pressure and so on. In addition, we especially will focus on the developing a triggering pulse generator, which can vary not only value of voltage but also pulse duration, because its properties gives pivot influences on the TVS discharge. To verify such effects, we made a 3.3 kJ TVS set-up initially. Thus we will discuss some of prominent results from 3.3 kJ TVS system. In parallel we will show on the design of 300 kJ TVS system for the high current in the future.