• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.77-81
• /
• 2006

Because of the rapid increasing of network user, there are some problems to tolerate the network overhead. Recently, the research and technology of the user-level for high performance and low latency than TCP/IP which relied upon the kernel for processing the messages. For example, there is an Infiniband technology. The Infiniband Trade Association (IBTA) has been proposed as an industry standard for both communication between processing node and I/O devices and for inter-processor communication. It replaces the traditional bus-based interconnect with a switch-based network for connecting processing node and I/O devices. Also Infiniband uses RDMA (Remote DMA) for low latency of CPU and OS to communicate between Remote nodes. In this paper, we develop the SRP (SCSI RDMA Protocol) which is Storage Access Protocol on Infiniband network. And will compare to FC (Fibre Channle) based I-SCSI (Internet SCSI) that it is used to access storage on Etherent Fabric.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.123-132
• /
• 2001

This paper proposes a sound multicast packet-switching method which can less affect QoS(Quality of Service) degradation. The method includes a switch fabric with extra switching paths dedicated f()r multicast packets. Presented also are both a buffering structure and a scheduling algorithm for the proposed method. Simulation analysis for the method shows that the switching delay of unicast packets is decreased even though arrival rate of multicast packets is increased.

• The KIPS Transactions:PartC
• /
• v.12C no.1 s.97
• /
• pp.83-96
• /
• 2005

The multichannel switch is an architecture widely used for ATM (Asynchronous Transfer Mode). It is known that the fault tolerant characteristic can be incorporated into the multichannel crossbar switching fabric. For example, if a link belonging to a multichannel group fails, the remaining links can assume responsibility for some of the traffic on the failed link. On the other hand, if a fault occurs in a switching element, it can lead to erroneous routing and sequencing in the multichannel switch. We investigate several fault localization algorithm in multichannel crossbar ATM switches with a view to early fault recovery. The optimal algorithm gives the best performance in terms of time to localization but it is computationally complex which makes it difficult to implement. We develop an on-line algorithm which is computationally more efficient than the optimal one. We evaluate its performance through simulation. The simulation results show that the Performance of the on-line algorithm is only slightly sub-optimal for both random and bursty traffic. There are cases where the proposed on-line algorithm cannot pinpoint down to a single fault. We enumerate those cases and investigate the causes. Finally, a fault recovery algorithm is described which utilizes the information provided by the fault localization algorithm The fault recovery algorithm providesadditionalrowsandcolumnstoallowcellstodetourthefaultyelement.

• Journal of Fashion Business
• /
• v.24 no.5
• /
• pp.140-157
• /
• 2020

The purpose of this study is to develop three functions for smartphones and PCs using a textile touch sensor in an everyday sports jacket and to present their usefulness; to this end, we have developed a mutual capacitive textile touch sensor and corresponding structure, and we have implemented three functions into a textile touch sensor jacket, of which we also conducted a usability evaluation. The jacket has a sensor on the wrist of the left sleeve and a device on the left arm. The sensor system can be divided into three main categories: a sensor acting as a switch, a circuit connecting the sensor and the device, and the device that acts as power control and system on/off. The functions are implemented in the texture touch sensor jacket in three modes: cell phone mode, music mode, and PPT presentation mode. We conducted an evaluation of each function in each mode, which indicated that all functions performed well without errors and that the switch had excellent operation for the number and intensity of touch. In terms of usability in a humid environment, the performance of touch functions was found to be equally implemented. In the temperature environment, neither high nor low temperatures caused issues with the functions. A wearing satisfaction assessment evaluated psychological satisfaction, clothing convenience, device convenience, device usability, and device effectiveness. This research jacket is thought to be desirable for the relatively bendable, flexible, and intimate sensor used on the clothing, and the circuit made of conductive fabric tape.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.5
• /
• pp.1184-1195
• /
• 1998

In this paper, we compare vaious input-buffered ATM switch architectures in structures on input buffer and switching fabric, the resons for performance improvement and degradation, arbitration scheme and maximum throughput, and present comparative merits and demerits of each architecture under random and bursty traffic. We also analyze the prformance of combined architectures of windowing scheme, destination-queueing based input-port expansion schemeand output-port expansion scheme, and show that it is possible to achieve 100% throughput with combined scheme of destination-queueing based input-port expansion scheme and output-port expansio scheme when the number of output group is 2 and output port expansion ratio is 2.

• Journal of Internet Computing and Services
• /
• v.3 no.5
• /
• pp.9-17
• /
• 2002

CSIX-L1 is the Common Switch Interface that defines a physical interface for transferring information between a traffic manager (Network Processor) and a switching fabric in ATM, IP, MPLS, Ethernet and data communication areas. In Tx, data to be transmitted is generated in Cframe which is the base information unit and in Rx, original data is extracted from the received Cframe. CSIX-L1 suppots the 32, 64, 96, and 123-bit interface and generates a variable length CFrame and Idle Cframe. Also CSIX-L1 appends Padding byte and supports 16-bit Vertical parity, CSIX-L1 is designed using Xilinx 4,1i. After functional and timing simulations are completed. CSIX-L1 module is downloaded in Xilinx FPGA XCV1000EHQ240C and verified. The synthesized CSIX module operates at 27MHz.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.6
• /
• pp.845-856
• /
• 2014

This study focused on the production and usability evaluation of smart outdoor jackets that are designed to provide convenience to middle-aged people by embedding devices for lighting and location tracing. The results were as follows. 1. Jacket power supplier was a assembled system composed of battery, charger, controller and switch. A solar cell was attached on the upper arm, and a wire type EL on the center line of a raglan sleeve along with a GPS on the left sleeve with a transparent vinyl pocket. The total weight of the jacket embedded with devices was 385-520g. 2. Operation of function, activity, acceptability, safety, convenience for device use, appearance, practical maintenance were selected based on an analysis of evaluation criteria of previous smart wear research. Criteria were narrowed to three major categories of satisfaction, appearance and maintenance. 3. Use satisfaction criterion consisted of wearable device functionality and physical, psychological use convenience. The evaluation indicated actual functionality. EL functions were especially effective and necessary. Convenience of use showed that a smart jacket was thought to be safe and the size was moderate regardless of age and gender. Outer appearance was satisfactory and respondents praised the color. The practical maintenance evaluation indicated that there was no challenge in doing the laundry since the solar battery and GPS were detachable. The practical use of smart outdoor jackets confirmed by fabric that was washable and dried quickly.

• Fashion & Textile Research Journal
• /
• v.14 no.4
• /
• pp.588-596
• /
• 2012

This research was intended to design an experimental girdle with thermal insulation function for adult women in their 20s. The design of the experimental girdle was based on the pattern of commercially available girdle. The final pattern of the experimental girdle was established according to the drawing equations determined based on the result of appearance evaluation. The equations were (waist circumference${\times}0.88$)/2 for waist circumference, (hip circumference${\times}0.77$)/2 for hip circumference, and (thigh circumference${\times}0.85$) for thigh circumference. In order to develop a heating device, the most effective fabric heater was adopted based on the experiments about the number of caron fibers, heater size and attachment site. Three heaters-one with a size of $14.5{\times}9.5$ cm, and the other two with the size of $8.0{\times}15.0$ cm-were attached to the areas corresponding to the lower abdomen and the hip, 5 cm below the waist. A heater was developed by connecting these heaters to a controller, 2 batteries (7.4 V 2000 mAh lithium polymer batteries) and a switch (for mode conversion between high/medium/low temperatures). The heater was integrated into the inside of the girdle, so that attachment and detachment were possible without the change of appearance. The tentative configuration plan was proposed for the development of a functional smart girdle with an excellent thermal insulation effect.

• Fashion & Textile Research Journal
• /
• v.15 no.2
• /
• pp.231-239
• /
• 2013

This research developed a smart girdle for adult women in their 20's that has an inserted carbon weaving heater to help with relief from coldness and abdominal disease through the thermal insulation effect. A pocket of powernet fabric was attached to the inside of the girdle for the easy insertion and separation of the heating device, while the heating device was fixed to a mesh material by cotton yarn and was wrapped with elastic lining material to prevent the mechanical devices from being exposed. A set of 3 hooks was attached to the center of the back of the heating device in consideration of convenience and mobility. Whereas the switch was inserted into around the right waistband, and the battery into the inner pocket around the waist, to integrate the heating device with the girdle. The satisfaction and usability of the fabricated smart girdle was verified by having research participants wear it to evaluate the appearance change caused by the device, the inconvenience of wearing/unwearing, mobility, and the satisfactory functionality of the device. As a result, the grand mean was evaluated to be high, with appearance (4.19), mobility (4.17), and functionality (4.51) being higher than 4.00; which indicates that the heat generation function of the smart girdle is effective. It may be said that such collection and analysis of data that reflect users' opinions have value and significance in that they can be grafted onto future research on new technology as well as they contribute to taking a step forward in the rapidly increasing research of smart clothing, with the new-type clothing equipped with new function.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.569-580
• /
• 2003

One of the important advantages of multichannel switches is the incorporation of inherent fault tolerance into the switching fabric. For example, if a link which belongs to the multichannel group fails, the remaining links can assume responsibility for some of the traffic on the failed link. On the other hand, if faults occur in the switching elements, it can lead to erroneous routing and sequencing in the multichannel switch. We investigate several fault localization algorithms in multichannel crossbar ATM switches with a view to early fault recovery, The optimal algorithm gives the best performance in terms of time to localization but is computationally complex which makes it difficult to implement. We develop an on-line algorithm which is computationally mote efficient than the optimal algorithm. We evaluate its performance through simulation. The simulation results show that performance of the on line algorithm is only slightly sub-optimal for both random and bursty traffic. Finally a fault recovery algorithm is described which utilizes the information provided by the fault localization algorithm.