• 멤브레인
• /
• 제11권3호
• /
• pp.133-139
• /
• 2001

PVA/SSA-$H^{+}$으로 제조된 막은 1가 이온 $Li^{+}$, $Na^{+}$, $K^{+}$, 2가 이온 $Mg^{2+}$, $Ca^{2+}$, $Ba^{2+}$, 3가 이온 $Al^{+}$로 치환되었다. 각 금속이온이 치환된 막의 금속이온의 효과를 알아보기 위하여 물-에탄올 및 물-메탄올 혼합용액에 대하여 팽윤도 및 투과증발 실험을 수행하였다. 또한 이들의 치환정도를 알아보기 위해 부분적으로 ESCA 실험을 통하여 알아보았다. 물-에탄올 및 물-메탄올 혼합용액에 대한 팽윤도는 $Li^{+}$> $Na^{+}$>$K^{+}$의 순으로 감소하였는데 이는 금속이온의 `salting-out'효과에 기인하는 것으로 사료되었으며, 2가 및 3가이온의 경우의 팽윤도 결과는 `salting-out' 효과뿐만 아니라 electrostatic 가교 및 금속이온의 반응성에 의해 좌우되는 것으로 사료되었다. 투과증발실험을 통한 투과도면에서는 물-에탄올 용액에 대해 PVA/SSA-$Na^{+}$막에서 최소치를 보였다가 PVA/SSA-$K^{+}$막에서 다시 증가하는 결과를 얻은 반면에 선택도는 반대의 경향을 얻었다. 대표적 분리 결과는 $50^{\circ}C$에서 90%에탄올 수용액에 대하여 투과도는 59 g/$m^{2}$hr, 선택도는 44의 값을 얻었다. 물-메탄올 용액에 대해서는 1가이온의 경우 에탄올 용액과 같은 경향의 결과를 얻었으나 2가 및 3가 이온의 경우 팽윤도 실험 결과와 마찬가지로 `salting-out' 효과 그리고 electrostatic 가교 등에 의해 영향을 받는다고 할 수 있다.

• 대한본초학회지
• /
• 제23권2호
• /
• pp.51-58
• /
• 2008

Objectives : Trimellitic anhydride (TMA), a sensitizer that induces occupational asthma and atopic dermatitis, is widely used industrially to make epoxy and alkyd resins, plasticizers, high temperature polymer, and surfactants. The aim of this study was to investigative the effects of aqueous extracts of Lonicera japonica Flower(LJFAE) on TMA-induced contact hypersensitivity (CHS) in Balb/c mice. Methods : The dried flowers of L. japonica were extracted with distilled water at $100^{\circ}C$ for 7 h. The extract was freeze-dried following filteration through 0.45 ${\mu}m$ filter. Mice were orally administrated with or without LJFE of a different doses(25-100 mg/kg) for 28 days. In the challenge period, mice were externally applied at difference doses of LJFAE one time per day 30 min before TMA treatment. We examined the effects of LJFAE on the the serum levels of IgE and prostagladin E2 (PGE2), the Thl/Th2 cytokine production of spleen cells, ear swelling responses, and the leukocyte infiltration induced by TMA. Results : The orally and externally administration of LJFAE dose-dependently reduced the serum levels of IgE and PGE2 production as well as ear swelling responses and leukocyte infiltration in TMA-induced Balb/c mice. Furthermore, the levels of Thl (TNF-${\alpha}$, IFN-${\gammer}$, IL-2)/Th2 (IL-4, IL-5, IL-13) cytokine production from spleen cells stimulated with anti-CD3 and CD28 mAbs was markedly suppressed by the orally and externally treatment with LJFAE in a concentration dependent manner. Conclusions : These results suggest that LJFAE suppresses the inflammatory mediators and regulates the Thl/Th2 cytokines. Therefore, these properties may contribute to the strong anti-CHS response effect of LJFAE.

• 한국식품과학회지
• /
• 제18권6호
• /
• pp.437-442
• /
• 1986

밤전분의 수분을 14,18,21 및 24%로 조절하고 $100^{\circ}C$에서 16시간 가열 처리한 다음 이화학적 성질을 생전분과 비교하였다. 수분-열처리에 따라 결정도, 팽화력 및 용해도는 다같이 감소하였다. 전분현탁액(0.1%)의 광투과도는 $58^{\circ}C$부터 급격히 증가하였으나 수분 (18%) 열처리한 전분은 $63^{\circ}C$부터 광투과도가 증가하였으며 그 증가율은 비처리 전분에 비하여 낮았다. 전분의 호화양상은 수분-열처리에 의하여 초기호화온도는 증가하였고 수분 21%이상 처리한 전분은 최고 점도를 보이지 않았다. 전분의 호화에 필요한 최저수분함량은 생전분이 45%, 수분(18%)-열처리한 전분이 40%이었으며. 호화에 필요한 최저 온도는 모두 $65^{\circ}C$이었다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.148-155
• /
• 2011

Thermal treatment techniques are used for modifying wood and wood-based materials to improve dimensional stability and hygroscopicity. This study investigated the effects of press pressure and temperature on density, vertical density profile, thickness swelling and surface hardness of eucalyptus wood boards. The experimental wood boards were prepared from Turkish River Gum ($Eucalyptus$ $camaldulensis$ Dehn.). The surface hardness value increased with increasing press pressure in the treated groups. The application of a higher pressure at the same temperature level increased the amount of swelling of wood. It means that it is not needed for application of higher pressure to enhance the dimensional stability of wood. It is expected that it is possible to produce increased hardness, dimensional stability and durability by application of hot pressing treatment. This research showed that different press pressure and temperature values should be used to improve the performance properties of eucalyptus wood so that the end-use of the wood materials could be expanded.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제39권4호
• /
• pp.193-196
• /
• 2013

Artecoll (Artes Medical Inc., San Diego, CA, USA) has recently been developed as a permanent synthetic cosmetic filler. We experienced an inflammatory granuloma resulting from a previous injection of Artecoll at the upper lip, which was regarded as a rare side effect of this filler. A 50-year-old female patient complained of swelling, dull pain, and heat in the right upper nasolabial fold area, which had started one week before her visit to Kyungpook National University Hospital. The patient received topical steroid therapy at a local clinic, which was not effective. At the injection site, a hard nodule was palpated and erythema was observed with mild tenderness. Antibiotic treatment and subsequent incision and drainage did not result in complete cure of the facial swelling, and the facial swelling and pain persisted. Computed tomography showed a lesion approximately 1-cm in size without clear boundaries and relatively increased nodular thickening. Finally, a subdermal lesion was removed via an intraoral vestibular approach. The lesion was diagnosed as inflammatory granuloma by a permanent biopsy. The patient had healed at two months after the filler injection. Although the soft tissue filler is widely used for cosmetic purposes, there is potential for complication, such as the inflammatory granuloma should be considered before treatment.

• The Korean Journal of Pain
• /
• 제19권2호
• /
• pp.223-227
• /
• 2006

Complex regional pain syndrome (CRPS) is clinically characterized by pain, abnormal regulation of blood flow and sweating, edema of skin and subcutaneous tissues, sensory and motor disturbances, and trophic changes of the skin. A 21-year-old man was suffering from pain and swelling in his right hand and forearm. His arm had been in splints for 3 weeks following an extension injury of the right fingers and wrist, with the pain having developed 2 weeks after the splinting. He was treated with various nerve blocks including continuous epidural infusion, thoracic sympathetic block and peripheral nerve blocks, and squeezing his edematous region under general anesthesia as well as intravenous lidocaine and ketamine infusions. However, all of the performed treatments had no effect on the patient's pain or hand swelling. As a next line therapy, spinal cord stimulation should be considered because of intractable severe pain and swelling to almost all other modalities of therapy. We therefore performed an early intervention of spinal cord stimulation for the patient with refractory CRPS type I 5 months after the onset of pain and have got an excellent result.

• 임산에너지
• /
• 제22권2호
• /
• pp.26-35
• /
• 2003

Bamboo strand board (BSB) was made with Phyllostachys banbusoides growing in Damyang district. Physical and mechanical properties of this BSB were summarized as follows; The specific gravity of BSB was 0.63∼0.79. Specific gravity decreased slightly with the thickness and length of BSB. Moisture content of BSB manufactured was 5.8∼6.9%. The absorption ate of BSB (42∼48%) did not show any relationship with the thickness and length of BSB. The thickness swelling rate of BSB was 13.9∼17.0%, relatively higher than any other panel products. Thickness swelling rate increased with the thickness of BSB, showing the strand thickness influenced much more on the rate of thickness swelling of BSB than the length of strand. The 3-point bending strength of BSB was 98∼126kgf/$\textrm{cm}^2$. Bending strength of showed the tendency of increase with the increased length of BSB, but with the decreased thickness. In particular, the length of BSB showed more effect on the increase of bending strength of BSB than the thickness of BSB. The compression strength perpendicular to BSB surface was 411 ∼ 465 kgf/$\textrm{cm}^2$, and the optimal length of strand for the 1mm- and 2mm-thickness of strand was 40mm and 60mm, respectively. Compression strength paralleled to BSD was 160∼221kgf/$\textrm{cm}^2$ and the optimal length of strand for the 2mm-thickness of strand appeared to be 60mm. The present work showed that appearance, physical and mechanical strength of BSB appeared quite positive in terms of board qualities, suggesting that bamboo would be appropriate for the production of board materials. In addition, our work showed that the crucial factor for determining the mechanical characteristics of BSB was the dimension of strand.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1475-1486
• /
• 2008

Bentonite-based grouting has been popularly used to seal a borehole installed for a closed-loop vertical ground heat exchanger in a geothermal heat pump system (GHP) because its high swelling potential. However, if the bentonite-based grouting is conducted in coastal areas, the salinity of groundwater changes in the mineral fabric of bentontie. In order words, an increase of cation concentration in groundwater leads to a reduction in the diffuse double-layer thickness in the bentonite mineral structure, and thus the volume of bentointe-based grouts will decrease proportional to the salinity of groundwater. In this paper, the effect of salinity (i.e., NaCl 0.5M, 0.25M, and 0.1M) on the change of swelling potential for bentonite-based grouts has been quantitatively evaluated for seven bentonite grouts from different product sources. In addition, in case of using addictives such as a silica sand to increase the thermal conductivity of bentonite-based grouts, the possibility of particle segregation has been studied considering the viscosity of grouts and salinity of groundwater.

• 대한물리치료과학회지
• /
• 제9권4호
• /
• pp.7-14
• /
• 2002

The drug therapy for rheumatoid arthritis must be maintained constantly or for the whole life but is apt to induce the adverse effects in gastrointestinal or renal system. Therefor, newer methods are paid attention to reduce adverse effects. The thirty-two rat female separated into seven groups depending on the therapy or Freund's adjuvant applied: Normal group(n=8) not received anything, Positive control group(n=8) only received adjuvant, USC group(n=8) received continuous US, USP group(n=8) received pulsed US. The physical and radiological findings by thermal and non-thermal effects of ultrasound were evaluated in groups with continuous mode at 1 MHz, $0.5\;W/cm^2$ for 6 minutes and with pulsed mode (duty cycle 1:9) at 1 MHz, $0.5\;W/cm^2$ for 6 minutes. The result summarized followings. 1. Swelling of forepaw and hindpaw was significantly reduced in USP. 2. Arthritis indices in USP group were significantly reduced than those in PCG. 3. In naked eye and radiologic findings, swelling was significantly prevented in USP group but not in PCG. The change of swelling, arthritis index, gross feature in naked eye, radiologic finding were significantly improved in all groups except for USC group, taking care for using its continuous mode.

• 자연과학논문집
• /
• 제11권1호
• /
• pp.151-157
• /
• 1999

승화성이 우수한 분산염료를 사용하여 면포에 대한 열 전사 염색성의 최적조건을 알아보기 위하여 온도, 시간, 농도에 따른 전사 염색에 대하여 연구하였다. 이 최적조건에 따라 팽윤제를 첨가한 후의 열 전사 염색성과 전 처리된 면포의 열 전사 염색성 및 분자량에 따른 열 전사 염색성을 검토하였으며, 세탁견뢰도와 일광견뢰도를 측정하여 열 전사날염에 대한 염색견뢰도를 측정하였다. 분산염료를 사용하여 면포에 대한 열 전사날염의 최적조건은 염료용액의 농도는 5%로, 처리온도가 $200^{\circ}C$, 처리시간은 3분에서 열 전사 염색성이 우수하였다. 면포에 대한 전처리의 시간이 길어질수록 열 전사 염색성이 향상되었으며, 팽윤제로는 Glycerin이 우수하였고, 혼합처리보다는 전처리가 열 전사 염색성이 우수하였다. 분자량에 따른 열 전사 염색성은 혼합처리의 경우 분자량이 작을수록 열 전사 염색성이 향상되었으며, 분자량이 커짐에 따라 열 전사 염색성이 나빠짐을 나타내었다. 그러나 전처리의 경우는 분자량에 큰 영향을 받지 않음을 나타내었다. 열 전사 날염된 면포의 세탁견뢰도는 염료의 분자량이 작은 것이 우수하였고, 일광견뢰도는 염료의 분자량이 큰 것이 보다 우수한 견뢰성을 나타내었다.