• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.3
• /
• pp.219-229
• /
• 2020

Recently, since atopic dermatitis is sensitive to skin irritation, it has been suggested that the development of a patch that can effectively exhibit adhesion and absorption to a specific local area while minimizing skin irritation, and capable of appropriate drug release should be given priority. In this study, we tried to develop a hydrogel patch that minimizes skin irritation, adheres effectively to a specific area, and promotes absorption. The atopic patch was formulated into a super-absorbent hydrogel sheet using a freeze drying method. Cell viability assay was carried out using keratinocytes (HaCaT cell) and fibroblasts (L929 cells). In order to investigate the physical properties, FT-IR, FE-SEM, porosity analysis and swelling behavior were investigated. As a result, the newly prepared HA-Dex hydrogel patch was verified by biocompatibility and physical evaluation. In addition, the manufactured hydrogel patch has sufficient moisture absorption capacity and can relieve itching of atopic skin, and is expected to be applied to various drug delivery products for the treatment of atopic dermatitis in the future.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.698-706
• /
• 2019

Over the last few decades, there have been a lot of efforts to develop soft actuators, which can be external stimuli-responsive and applied to the human body. In order to fabricate medical soft actuators with a dynamic precision control, the 3D crosslinked poly(acrylic acid) (PAAc)/poly(vinyl alcohol) (PVA)/poly(ethylene glycol) (PEG) hydrogels were synthesized in this study by using a radiation technique without noxious chemical additives or initiators. After irradiation, all hydrogels showed high gel fraction over 75% and the ATR-FTIR spectra indicated that PAAc/PVA/PEG hydrogels were successfully synthesized. In addition, the gel fraction, equilibrium water content, and compressive strength were measured to determine the change in physical properties of PAAc/PVA/PEG hydrogels according to the irradiation dose and content ratio of constituents. As the irradiation dose and amount of poly(ethylene glycol) diacrylate (PEGDA) increased, the PAAc/PVA/PEG hydrogels showed a high crosslinking density and mechanical strength. It was also confirmed that PAAc/PVA/PEG hydrogels responded to electrical stimulation even at a low voltage of 3 V. The bending behavior of hydrogels under an electric field can be controlled by changing the crosslinking density, ionic group content, applied voltage, and ionic strength of swelling solution.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.4
• /
• pp.283-293
• /
• 2015

The buffer is a key component of the engineered barrier system in a high-level radioactive waste (HLW) repository. The present study reviewed the requirements and functional criteria of the buffer reported in literature, and also based on the results, proposed an approach to establish a buffer concept which is applicable to an HLW repository in Korea. The hydraulic conductivity, radionuclide-retarding capacity (equilibrium distribution coefficient and diffusion coefficient), swelling pressure, thermal conductivity, mechanical properties, organic carbon content, and illitization rate were considered as major technical parameters for the functional criteria of the buffer. Domestic bentonite (Ca-bentonite) and, as an alternative, MX-80 (Na-bentonite) were proposed for the buffer of an HLW repository in Korea. The technical specifications for those proposed bentonites were set to parameter values that conservatively satisfy Korea's functional criteria for the Ca-bentonite and Swedish criteria for the Na-bentonite. The thickness of the buffer was determined by evaluating the means of shear behavior, radionuclide release, and heat conduction, which resulted in the proper buffer thickness of 0.25 to 0.5 m. However, the final thickness of the buffer should be determined by considering coupled thermal-hydraulic-mechanical evaluation and economics and engineering aspects as well.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.34-39
• /
• 2017

In this study, intermolecular crosslinked carboxymethyl cellulose sodium salt (CMC) and porcine Cartilage Acellular Matrix (PCAM) blended hydrogel films for anti-adhesive barriers were prepared by gamma-ray radiation. The effects of the CMC/PCAM concentration and blending ratio on the morphology, gel fraction, gel strength, and degree of swelling were determined. The results indicated that crosslinked CMC/PCAM films show significantly lower the gel-fraction than CMC films. The degree of attachment and proliferation of human vascular endothelial cells on CMC/PCAM films was lower than the CMC films. We show the capacity of the CMC and PCAM to be hydrogel films, and the ability to reduce cell adhesion and proliferation on these films by modification with cell anti-adhesion molecules of PCAM. In conclusion, this study suggests that radiation cross-linked CMC/PCAM hydrogel films endowed with anti-adhesion ligands may allow for improved regulation of cell anti-adhesion behavior for prevent peritoneal adhesions.

• Journal of Veterinary Clinics
• /
• v.19 no.4
• /
• pp.418-425
• /
• 2002

Estrus was induced in 13 anestrus Korea Jin-do bitches by intramuscular injection of pregnant mare serum gonadotropin (PMSG) in a dose of 500 lU once daily for ten consecutive days, followed by an additional single intraveneous injection of 1,000 lU of human chorionic gonadotropin (hCG) on the tenth day. Day-changes of vaginal epithelial cells during the hormone treatment were investigated in each experimental bitches and compared with the those of spontaneous estrus bitches. The first days of vulval bleeding and male acceptance after PMSG treatment were on Day 6.0$\pm$ 1.5 (mean$\pm$ SD) and Day 9.0$\pm$ 1.9, respectively. And in all of 13 bitches, vulval swelling and perineal reflex were shown. The mean durations of proestrus and estrus were 2.9$\pm$ 1.4 (mean$\pm$ SD, range ; 1-6) and 11.5: 1.7 (range ; 8-14) days, respectively, that is, duration of proestrus was significantly shorter than that of the spontneous estrous bitches but duration of estrus was longer than that of the spontaneous estrous bitches. Characteristic features of vaginal cytology during the estrous cycle were the high proportions of large intermediate cell, superficial cell, anuclear cell and erythrocyte in proestrus, superficial cell and anuclear cell in estrus and parabasal cell, small intermediate, large intermediate cell, and leukocyte in diestrus, respectively. The comification index (Cl) was significantly high proportion in proestrus and estrus, when Day 0 was timed from the first day of male acceptance, the Cl was first increased above 80% on Day 0 and maintained above 80% until Day 0 to Day 5 during 6 days and showed a peak on Day 2. Also it was maintained above 90% until Day 2 to Day 3 during 2 days. These results indicated that all 13 ekperimental bitches showed positive estrus detection by the estrus behavior and vaginal smear test after treated with PMSG and hCC. It suggested that vaginal cytology was used to estimate the optimal mating and ovulation time, in consideration of the day when the Cl was maintained above 80% in estrus-induced Korea Jin-do bitches.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.3 s.45
• /
• pp.183-194
• /
• 2005

The mineralogical, physicochemical and thermal properties of the Myogi bentonite occurring in Japan were measured. A adsorption properties of U, Th, Ce and Eu ions on the Myogi bentonite were also investigated in different solution concentrations and pH conditions. The Myogi bentonite showed a strong alkaline character (pH 10.4), very high swelling, viscosity property and CEC, and a slow flocculation behavior due to the strong hydrophilic property. By the thermal analysis, the dehydroxylation of crystal water in bulk and clay fractions of the Myogi bentonite occur at $591^{\circ}C$ and $658^{\circ}C$, respectively, The adsorption experiments of ions such as U, Th, Ce and Eu were conducted for 0.2 g bentonites with 20mL solutions of various concentrations and different pH conditions with pH 3, 5, 7, 9, and 11. As a result, the Myogi bentonite showed excellent adsorption capacities for Ce, Th and Eu ions, whereas U ion showed very low adsorption capacity. Generally, Ce, Th and Eu ions showed the similar adsorption properties for the different concentrated solutions and pH conditions. These adsorption properties seem to be affected by the formation of various forms of chemical species and precipitation as well as ionic exchange reaction and surface adsorptions on smectite. Some associated zeolite minerals perhaps have some effects on the adsorption of U, Th, Ce and Eu on Myogi bentonite.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.109-115
• /
• 2006

The calcifying odontogenic cyst (COC) predominantly affected Maxillary anterior segment and it is developmental cyst. But COC showed diverse terminology or classification, clinicopathologic features as well as its biologic behavior COC usually presents as slowly enlarging but otherwise symptomless swelling. Association with impacted teeth and odontoma is described in $24{\sim}30%$. The epithelial lining of COC(ghost cell) appears to have ability to induce the formation of dental tissues in the asjcents connective tissue wall. This case is a COC associated with a odontoma involving an impacted left maxillary canine in 14-year-old female child. Radiographic examination revealed a well-demarcated radiolucent lesion partially occupied by a radiopaque mass, involving the left canine. The histologic sections showed cystic cavity lined with ameloblastic epithelium containing ghost cell masses with regular and irregular shape odontoma. The final pathologic diagnosis was calcifying odontogenic cyst with odontoma(Type IB by Preatorius). Enucleation and elimination of the included tooth were performed. Now endodontic treatment was preformed on the 1st premolar of the upper left jaw, which had a lesion. And the patient and their parents want to have the orthodontic treatment performed and would like to keep the space maintainer.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.12
• /
• pp.57-62
• /
• 2010

In this study, the effect of different silt contents on the shear characteristics of silty sands was evaluated. Two series of triaxial compression tests were performed on the cylindrical specimens of compacted Nakdong river sand with 10% and 30% silt contents under unconsolidated undrained condition. All identical specimens were prepared to compact with same initial water content for five layers and saturated using control panel and then sheared under initial effective confining pressure, 100 to 400kPa. All specimens exhibited a strain softening tendency after failure in stress-strain curves and deviator stresses of specimens with 10% silt content were greater than those of specimens with 30% silt content. Pore water pressures of specimens with 10% silt content were observed negative(i.e. swelling) due to increasing void ratio after failure but those of specimens with 30% silt content were shown only positive. The behavior of compacted cylindrical specimens with low silt content was more dilative than that of high silt content. Peak deviator stresses decreased as increasing silt content and peak pore water pressures increased as increasing silt content.

• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.268-279
• /
• 2018

The ALCYONE multidimensional fuel performance code codeveloped by the CEA, EDF, and AREVA NP within the PLEIADES software environment models the behavior of fuel rods during irradiation in commercial pressurized water reactors (PWRs), power ramps in experimental reactors, or accidental conditions such as loss of coolant accidents or reactivity-initiated accidents (RIAs). As regards the latter case of transient in particular, ALCYONE is intended to predictively simulate the response of a fuel rod by taking account of mechanisms in a way that models the physics as closely as possible, encompassing all possible stages of the transient as well as various fuel/cladding material types and irradiation conditions of interest. On the way to complying with these objectives, ALCYONE development and validation shall include tests on $PWR-UO_2$ fuel rods with advanced claddings such as M5(R) under "low pressure-low temperature" or "high pressure-high temperature" water coolant conditions. This article first presents ALCYONE V1.4 RIA-related features and modeling. It especially focuses on recent developments dedicated on the one hand to nonsteady water heat and mass transport and on the other hand to the modeling of grain boundary cracking-induced fission gas release and swelling. This article then compares some simulations of RIA transients performed on $UO_2$-M5(R) fuel rods in flowing sodium or stagnant water coolant conditions to the relevant experimental results gained from tests performed in either the French CABRI or the Japanese NSRR nuclear transient reactor facilities. It shows in particular to what extent ALCYONE-starting from base irradiation conditions it itself computes-is currently able to handle both the first stage of the transient, namely the pellet-cladding mechanical interaction phase, and the second stage of the transient, should a boiling crisis occur. Areas of improvement are finally discussed with a view to simulating and analyzing further tests to be performed under prototypical PWR conditions within the CABRI International Program. M5(R) is a trademark or a registered trademark of AREVA NP in the USA or other countries.

• Biomolecules & Therapeutics
• /
• v.2 no.2
• /
• pp.190-205
• /
• 1994

This study was conducted to investigate the repeated dose toxicity of DA-125, a new anthracycline antitumor antibiotic, in rats. Before the 13-week main study, a 4-week dose-range finding (DRF) study was carried out. The administration of DA-125 intravenously at dosage levels of 0, 0.125, 0.5, 2.0, and 8.0 mg/kg/day to rats for 4 weeks resulted in premature deaths of all animals in the 8.0 mg/kg/day group and in the deaths of 4 males and 4 females at 2.0 mg/kg/day. Body weights were markedly reduced in the 8.0 mg/kg/day group and showed dose-related decreases in all treatment groups when compared with the control group. Reductions in weight gain were slight and not significantly different at 0.125 mg/kg/day but animals receiving 0.5 mg/kg/day showed more marked decreases in gain in a clear dose-related manner Based On the results of the above DRF study, a 13-week repeated dose intravenous toxicity study in rats with DA-125 was performed at a dose level of 0, 0.012, 0.08 and 0.3 mg/kg/day. No treatment related effects were noted in behavior or body weight in all treatment groups. One male at the highest dose level died on study day 26, but the death could not be related to test article toxicity. Swelling and scabbing of the ears was present in all of the groups, including the control group. There were no treatment related changes in the hematological, biochemical or urinalysis values in all treatment groups. Thymus weights were significantly reduced ill males receiving 0.3 mg/kg/day and they were sligltly, and not significantly, reduced in females of the same group. While there were no associated histological changes. Treatment related necrosis was found in the tail vein (injection site) at 0.08 and 0.3 mg/kg/day. On the basis of these results, the no observed effect level (NOEL) was 0.012 mg/kg/day and the maximum tolerated dose (MTD) was estimated to be more than 0.3 mg/kg/day under the conditions tested.