• Structural Engineering and Mechanics
• /
• v.74 no.4
• /
• pp.533-545
• /
• 2020

An optimal design method for a spoke double-layer cable-net structure (SDLC) is proposed in this study. Simplified calculation models of the SDLC are put forward to reveal the static responses under vertical loads and wind loads. Next, based on an energy principle, the relationship among the initial prestress level, cross-sectional areas of the components, rise height, sag height, overall displacement, and relative deformation is proposed. Moreover, a calculation model of the Foshan Center SDLC is built and optimized. Given the limited loading cases, material properties of the components, and variation ranges of the rise height and sag height, the self-weight and initial prestress level of the entire structure can be obtained. Because the self-weight of the cables decreases with increasing of the rise height and sag height, while the self-weight of the inner strut increases, the total weight of the entire structure successively exhibits a sharp reduction, a gradual decrease, a slow increase, and a sharp increase during the optimization process. For the simplified model, the optimal design corresponds to the combination of rise height and sag height that results in an appropriate prestress level of the entire structure with the minimum total weight.

• Journal of the Korean Ceramic Society
• /
• v.51 no.1
• /
• pp.1-6
• /
• 2014

Here we report improved photo-catalytic effect of $Ag_2S$ under visible light using carbon nano-tubes (CNT) modified with $Ag_2S$ nanoparticles. The optical properties, structural properties and compositional analysis, as well as the photo-electrochemical properties of the prepared composites were investigated. It was found that the photocurrent density, and the photo-catalytic effect, was increased by modification of CNT in this way. Compared with the separate effects of $Ag_2S$ and CNT nanoparticles, the photocatalytic effect of CNT-modified-with-$Ag_2S$ composites, increased significantly due to a synergistic effect between the CNT and the $Ag_2S$ nanoparticles.

• BMB Reports
• /
• v.49 no.7
• /
• pp.394-399
• /
• 2016

Glioma-Associated Oncogene Homolog1 (Gli1) is known to be activated in malignant glioma; however, its downstream pathway has not been fully explained. The aim of this study was to explore the role of Gli1-Aquaporin1 (AQP1) signal pathway in glioma cell survival. Our data suggests that both Gli1 and AQP1 are upregulated in glioma tissues, as in comparison to in normal tissues. These up-regulation phenomena were also observed in glioma U251 and U87 cells. It was demonstrated that Gli1 positively regulated the AQP1 expression. By luciferase reporter gene and ChIP assay, we observed that this modulation process was realized by combination of Gli1 with AQP1 promotor. In addition, knock down of Gli1 by siRNA interference reduced the viability of glioma cells as well as suppressed cell metastasis. Also, the inhibitory effects of cell survival by silenced Gli1 were abrogated by AQP1 overexpression. In summary, glioma cell survival is a regulatory process and can be mediated by Gli1-AQP1 pathway.

• Journal of Families and Better Life
• /
• v.30 no.3
• /
• pp.29-44
• /
• 2012

The research is aimed to provide suggestions to higher the level of green consumption awareness in South Korea and China, through comparative analysis of consumers in both countries. It also tries to understand how the consumption awareness and consumer education influences on the green consumption awareness. The study examined residents in Seoul, Korea, and Suzhou, China, and the research was conducted from March 25 to 31 in 2010. Three hundred and four samples in total were analyzed. The major results of this study were summarized as follows: First, Korean consumers' green consumption awareness is higher than that of Chinese consumers. Yet, consumers in both countries showed the lowest level in environmental participatory awareness in green consumption awareness. Second, environmental problems concern and green consumption information search is the key variable in the improvement of green consumption awareness level both in Korea and China.

• Korean Journal of Materials Research
• /
• v.27 no.5
• /
• pp.255-262
• /
• 2017

Reactive oxygen species (ROS) can be produced by interactions between sunlight and light-absorbing substances in natural water environments and can completely destroy various organic pollutants in waste water. In this study, we used graphene oxide modified $Ag_2Se$ nanoparticles to enhance photochemically generated oxygen (PGO) species activity. Surface area and pore volumes of the $Ag_2Se-graphene$ ($Ag_2Se-G$) samples showed catastrophic decrease due to deposition of $Ag_2Se$. The generation of reactive oxygen species was detected through the oxidation reaction of DPCI to DPCO. The photocurrent density and the PGO effect increase in the case of the use of modified graphene. The PGO effect of the graphene modified with $Ag_2Se$ composites increased significantly due to a synergetic effect between graphene and the $Ag_2Se$ nanoparticles. The photocatalytic activity of sample was evaluated by measuring the degradation of organic pollutants such as methylene blue (MB) and industrial dyes such as Texbrite BA-L (TBA) under visible light.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.307-311
• /
• 2014

ZnS and $ZnS/TiO_2$ were prepared by chemical deposition. The prepared photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), and transmission electron microscopy (TEM). The generation of reactive oxygen species was detected by monitoring the oxidation reaction from 1,5-diphenyl carbazide (DPCI) to 1,5-diphenyl carbazone (DPCO). Excellent catalytic degradation of methylene blue (MB) solution was observed using the $ZnS/TiO_2$ composites during irradiation with visible light. The results show that the photocatalytic performance of $TiO_2$ nanoparticles is improved by loading with ZnS.

• Publications of The Korean Astronomical Society
• /
• v.31 no.3
• /
• pp.65-76
• /
• 2016

We study a manuscript that includes 28 oriental constellations in the flags of barracks in Gangjin. According to the Joseon Chronicles, the constellation flags in the manuscript are thought to have originated from Seon-Pil Kim (金善弼) who first made 28 constellation flags for the barracks in 1878 during the Joseon Dynasty. Seon-Pil Kim was a commander and he used the 28 constellation flags for communications in a military camp. The flags also contain 28 animals and letter-like symbols with constellation maps. We examine the constellation maps in flags in terms of shapes and number of stars, and compare them with those of constellations in the Korean and Chinese star charts such as CheonSangYeolChaBunYaJiDo (天象列次分野之圖), Joseon-Butienge (朝鮮步天歌), Suzhou (蘇州) Star Chart, and Tang-Butiange (唐步天歌). Finally, we found that the shape of constellations in the flags might be similar to those in the Chinese Tang-Butienge. We also found several errors such as the shape, connecting pattern, and number of constellations drawn in the flags. It seems that the constellation flags were unofficially used in military camps in the late Joseon dynasty. Meanwhile, the 28 constellations are divided into four groups and each group has its own color and direction. We suppose that the constellation flags might represent the positions of military camps and each group of flags has their own color based on their cardinal points.

• Journal of Convergence Society for SMB
• /
• v.3 no.2
• /
• pp.19-25
• /
• 2013

Decision procedure was done with the evaluation of multi-criterion analysis. Importance of each criterion was considered through heuristically method, specially it was based on the heuristic least mean square algorithm. To consider coalition evaluation, it was carried out by calculation of Shapley index and Interaction value. The model output is also analyzed with the help of those two indexes, and the procedure was also displayed with details. Finally, the differences between the model output and the desired results are evaluated thoroughly, several problems are raised at the end of the example which require for further studying.

• Asia-Pacific Journal of Business
• /
• v.9 no.1
• /
• pp.91-106
• /
• 2018

An appreciable number of Chinese firms have successfully expanded their businesses into foreign economics although they have limited resources. Advocating that home country government supports can mitigate firms' resource-disadvantages in international expansions, we attempted to investigate whether and how the Chinese government's support enables Chinese firms to compete in foreign markets. Based heavily on the knowledge-based theory of the firm and the resource-based theory of the firm, we developed a model that explain and predicts the effects of home-country government-supports on superior financial performance. The model was empirically tested using a accounting dataset regarding Chinese firms' 323 international expansion events from 2008 to 2015. Empirical evidence presents that the Chinese government's support has a positive effect on Chinese firms' international success and that these firms' marketing, technological, and managerial resources positively moderate the effect of the government support on the firms' international success. Nonetheless, because we employed an event-study method, the limitations of the method can be applied to the current research. In addition, because of the empirical context, the results of the research might lack generalizability. We, however, provided an understanding how firms from emerging countries can succeed in international expansions specifically when they have lack of resources for international competition.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.295-296
• /
• 2006

High hardness of P/M parts can be obtained in the cooling section of the sintering furnace by using sinter hardenable materials, thus the post-sintering heat treatment can be eliminated. However, the sinter hardened materials would have difficulties in secondary machining if it is required, which will limit the applications of sinter hardenable materials in the machined parts. Recent development in warm compaction technology can enable us not only to achieve the high green density up to $7.4\;g/cm^3$, but also the high green strength which is needed for green machining. Therefore by using warm compaction technology, the green machining can be applied to sinter hardenable materials for the high density, strength and hardness P/M parts. In the present study, a pre-alloyed steel powder, ATOMET4601, was used by mixing with 2.0% copper, 1.0% nickel, 0.9% graphite and a proprietary lubricant using a binder treatment process - FLOMET. The specimens were compacted and green machined with different machining parameters. The machined surface finish and part integrity were evaluated in selecting the optimal conditions for green machining. The possibility of applying the green machining to the high-density structural parts was explored.