• Wind and Structures
• /
• 제7권1호
• /
• pp.55-70
• /
• 2004

Aerostatic instability of a suspension bridge may suddenly appears when the deformed shape of the structure produces an increase in the value of the three components of displacement-dependent wind loads distributed in the structure. This paper investigates the aerostatic stability of suspension bridges using an advanced nonlinear method based on the concept of limit point instability. Particular attention is devoted to aerostatic stability analysis of symmetrical suspension bridges. A long-span symmetrical suspension bridge (Hu Men Bridge) with a main span of 888 m is chosen for analysis. It is found that the initial configuration (symmetry or asymmetry) may affect the instability configuration of structure. A finite element software for the nonlinear aerostatic stability analysis of cable-supported bridges (NASAB) is presented and discussed. The aerostatic failure mechanism of suspension bridges is also explained by tracing aerostatic instability path.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.119-126
• /
• 1999

In this paper, The program of design technique of Influence surface is presented for analysis of moving(live) load of long-span bridges such as suspension bridges. This program is verified by comparing with various numerical examples. The proposed program is calculated the design conditions for the initial equilibrium state of suspension bridges, hence it can be used to analysis of various 3-dimensional frame structure with cable system.

• 대한토목학회논문집
• /
• 제36권1호
• /
• pp.21-29
• /
• 2016

본 연구에서는 고정하중을 받는 다경간 현수교의 예비해석을 위한 케이블 부재의 초기평형상태 해석방법을 제안한다. 본 연구에서 제안한 초기 평형상태 해석 알고리즘은 타 연구들에서 사용된 기존 방법들보다 간편하고 실용적이며, 3경간 현수교 및 다경간 현수교에 적용 가능하다. 제안방법의 타당성을 검증하기 위해, 3경간 현수교 예제모델과 4경간 현수교인 국내의 새천년대교 및 중국의 Yingwuzhou Bridge 모델을 사용하여 초기평형상태 해석을 수행하였다. 검증 결과, 본 연구에서 제안한 초기평형상태 해석방법에 의한 결과가 3경간 예제모델의 선행 연구결과 및 새천년대교의 설계값과 잘 일치하는 경향을 나타내었으며, 제안 방법은 Yingwuzhou Bridge에 대한 초기형상을 잘 유지하는 초기값들을 도출하였다.

• Structural Monitoring and Maintenance
• /
• 제1권4호
• /
• pp.371-392
• /
• 2014

Long-span cable-supported bridges are flexible structures vulnerable to unsymmetric loadings such as railway traffic and strong wind. The torsional dynamic response of long-span cable-supported bridges under running trains and/or strong winds may deform the railway track laid on the bridge deck and affect the running safety of trains and the comfort of passengers, and even lead the bridge to collapse. Therefore, it is eager to figure out the torsional dynamic response of long-span cable-supported bridges under running trains and/or strong winds. The Tsing Ma Bridge (TMB) in Hong Kong is a suspension bridge with a main span of 1,377 m, and is currently the world's longest suspension bridge carrying both road and rail traffic. Moreover, this bridge is located in one of the most active typhoon-prone regions in the world. A wind and structural health monitoring system (WASHMS) was installed on the TMB in 1997, and after 17 years of successful operation it is still working well as desired. Making use of one-year monitoring data acquired by the WASHMS, the torsional dynamic responses of the bridge deck under rail traffic and strong winds are analyzed. The monitoring results demonstrate that the differences of vertical displacement at the opposite edges and the corresponding rotations of the bridge deck are less than 60 mm and $0.1^{\circ}$ respectively under weak winds, and less than 300 mm and $0.6^{\circ}$ respectively under typhoons, implying that the torsional dynamic response of the bridge deck under rail traffic and wind loading is not significant due to the rational design.

• 한국공간구조학회논문집
• /
• 제16권2호
• /
• pp.89-96
• /
• 2016

Cable structures are lightweight structures of flexible type, cable members have only axial stiffness related to tension, they can carry neither bending nor compression. This study is the analysis of cable truss systems are composed of upper and low cables by connecting bracing cables, the structural principle is based on a tensegrity system by using bracing tension members, discontinuous compression members and continuous tension members. A hanging roof of cable truss system is too flexible against vertical loads, most cable members are stabilized by connecting the prestressed upper and lower cable by bracing cables. A cable truss roof system is formed by adding a set of cables with reverse curvature to the suspension cables. With the sets of cables having opposite curvature to each other, cable truss is able to carry vertical load in both upward and downward direction with equal effectiveness, and then a cable truss acts as load bearing elements by the assemble of ridge cables, valley cables and bracing cables. This paper will be shown the geometric non-linear analysis result of cable truss systems with various sag ratio for deflections and tensile forces, the analytical results are compared with the results of other researchers.

• Structural Engineering and Mechanics
• /
• 제80권6호
• /
• pp.749-765
• /
• 2021

Suspension bridges bear large eccentric live loads in rush hours when most vehicles travel in one direction on the left or right side of the bridge. With the increasing number and weight of vehicles and the girder widening, the eccentric live load effect on the bridge behavior, including bending and distortion of the main girder, gets more pronounced, even jeopardizing bridge safety. This study proposes an analytical algorithm based on multi-catenary theory for predicting the suspension bridge responses to eccentric live load via the nonlinear generalized reduced gradient method. A set of governing equations is derived to solve the following unknown values: the girder rigid-body displacement in the longitudinal direction; the horizontal projection lengths of main cable's segments; the parameters of catenary equations and horizontal forces of the side span cable segments and the leftmost segments of middle span cables; the suspender tensions and the bearing reactions. Then girder's responses, including rigid-body displacement in the longitudinal direction, deflections, and torsion angles; suspenders' responses, including the suspender tensions and the hanging point displacements; main cables' responses, including the horizontal forces of each segment; and the longitudinal displacement of the pylons' tower top under eccentric load can be calculated. The response of an exemplar suspension bridge with three spans of 168, 548, and 168 m is calculated by the proposed analytical method and the finite element method in two eccentric live load cases, and their results prove the former's feasibility. The nonuniform distribution of the live load in the lateral direction is shown to impose a greater threat to suspension bridge safety than that in the longitudinal direction, while some other specific features revealed by the proposed method are discussed in detail.

• 한국컴퓨터산업학회논문지
• /
• 제7권1호
• /
• pp.33-38
• /
• 2006

케이블 뿐 아니라 현수교의 운동은 비선형 미분방정식에 지배된다. 미분방정식은 비선형성 때문에 진폭이 큰 해가 존재한다. 유한차분법을 이용하여 비선형 방정식의 주기근을 구한다. 일노드의 힘과 힘의 약간 변형된 형태를 이용하여 방정식의 해를 구한다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.537-544
• /
• 2003

This paper deals with stress corrosion cracking behavior of high strength steel exposed to marine environments. The objective is to determine the time to failure as a function of hydrogen concentration and tensile stress in the wires. A crack growth curve is modeled using finite element method (FEM) program. The coupled hydrogen diffusion-stress analyses of SCC were programmed separately. The first part is calculating stress and stress intensity /sup 1)/factor of a cylindrical shell, prestressing tendon or suspension bridge wires, from the initiation of cracks to rupture. Virtual crack extension method, contour integral method, and crack tip elements are used for the calculation of stresses in front of the crack tip. Comparisons of the result show a good agreement with the analytical equations and wire tests. The second part of the study deals with the programming of hydrogen diffusion, affected by hydrostatic stress, calculated at the location of boundary of plastic area around the crack tip. The results of paper can be used in the design and management of prestressed structures, cable stayed and suspension bridges. Time dependent correlated parallel reliabilities of a cable, composed of 36 wires, were evaluated by the consideration of the deterioration of stress corrosion cracking.

• Structural Engineering and Mechanics
• /
• 제88권1호
• /
• pp.53-65
• /
• 2023

With the gradual implementation of long-span suspension bridges into high-speed railway operations, the main beam's bending stiffness contribution to the live load response permanently grows. Since another critical control parameter of railway suspension bridges is the beam-end rotation angle, it should not be ignored by treating the main beam deflection as the only deformation response. To this end, the current study refines the existing method of the main cable shape and simply supported beam bending moment analogy. The bending stiffness of the main beam is considered, and the main beam's analytical expressions of deflection and rotation angle in the whole span are obtained using the cable-beam deformation coordination relationship. Taking a railway suspension bridge as an example, the effectiveness and accuracy of the proposed analytical method are verified by the finite element method (FEM). Comparison of the results by FEM and the analytical method ignoring the main beam stiffness revealed that the bending stiffness of the main beam strongly contributed to the live load response. Under the same live load, as the main beam stiffness increases, the overall deformation of the structure decreases, and the reduction is particularly noticeable at locations with original larger deformations. When the main beam stiffness is increased to a certain extent, the stiffening effect is no longer pronounced.

• 한국강구조학회 논문집
• /
• 제15권2호
• /
• pp.219-229
• /
• 2003

타정식 및 자정식 현수교의 정확한 초기형상을 결정하기 위하여 초기부재력법과 TCUD법을 효과적으로 결합시킨 개선된 해석 방법을 제시한다. 먼저 기하학적 선형해석을 수행하여 장력의 초기값을 가정한다. 이제 케이블의 무응력길이를 변수로 취급하여 TCUD법에 근거한 반복계산이 이루어진다. 수렴이 되면 현수교의 주탑 및 보강형의 축방향 변위를 제거하기 위하여, 케이블의 장력과 주탑, 보강형의 압축력, 그리고 주케이블의 절점 수직변위의 수렴된 값은 이용하고 나머지 부재력과 좌표값은 초기값으로 재조정하여 초기부재력법을 적용한다. 케이블요소의 모델링에서 무응력길이를 변수로 추가함으로써 주케이블 및 행어 정착부의 변위와 주탑의 수평변위를 설계목적에 적합하도록 제어하여 휨모멘트를 최소화하였고, 초기부재력법을 결합시켜 보강형, 주탑의 축방향변위가 발생하지 않는 해석결과를 얻을 수 있었다.