• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.3
• /
• pp.176-186
• /
• 2006

Distribution characteristics of organophosphorous pesticides(OPs) in water and suspended particles were studied in Asan Bay, Korea, from June 2004 to October 2005. 28 organophosphorous pesticides could be detected in Asan Bay during this study. The most commonly and abundantly measured OPs in the surface waters were IBP (max=$6,343.7ng\;l^{-1}$). DDVP, diazionon, ethoprophos and methidathion were also observed at relatively high concentrations. Their maximum concentrations exceeded $100ng\;l^{-1}$ in almost every month. Malathion, mevinphos, ph orate and chlorfenvinphos were also detected at relatively high concentrations. Many OPs more frequently appeared in summer than in winter due to the intensive application of pesticides in summer months. The concentration of OPs generally decreased with increasing distance from the mouth of Asan Bay. This result implies progressive dilution of these pesticides in the marine environment. Measured concentrations of diazinon were well below $20,000ng\;l^{-1}$ which is a limit set by the seawater quality standard of Korea. The concentrations of malathion and parathion in the surface waters of Asan Bay did not exceed the seawater quality standard of Korea($250,000\;and\;60,000ng\;l^{-1}$ respectively). OPs adsorbed on suspended particles were also studied. DDVP, phorate, stirofos, EPN, azinphos-methyl and IBP had higher adsorption capacity onto suspended particles than other pesticides. Calculated pesticide-particle adsorption coefficient($K_d-particle$) for samples collected in Asan Bay were closely related to the reported pesticides-soil adsorption coefficient ($K_d-soil$).

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.236-239
• /
• 2008

In the present study, a transient glass particle distribution in a stirred solid/liquid mixer was investigated using computational fluid dynamics(CFD). The flow patterns and solid concentaration distriburion in a solid/liquid mixer formed by pitched paddle and baffles were predicted. The numerical results were compared to experimental data from the available literature. Eulerian multi-phase model was used to investigate the influence of the density of solid particle on the same impeller speed. A good agreement was obtained between the experimental data and simulation results.

• Journal of Environmental Science International
• /
• v.6 no.3
• /
• pp.239-247
• /
• 1997

The numerical experiments using a particle tracking model have been performed for predicting the change of water Quality and shoreline. In present study, comparison of the numerical model results with the analytic solution shows that the point of the mainmum concentration and the distribution pattern is very similar. The reflection effect from the boundary was newly Introduced for making clear the effect of the closed boundary which set limits to application of a particle tracking model. The present model seems to reappear physical phenomenon well. This model shows well qualitative appearance of pollutant diffusion in Kwangan beach. Therefore, this model is regarded as a useful means for predicting diffusion movement of suspended sand, and change of water quality.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1213-1219
• /
• 2008

This experimental study was to analyze thermal comfort and indoor air quality(IAQ) with ventilation and humidification in the classroom when system air conditioner was operated. The thermal comfort was estimated by the PMV index and the concentration of $CO_2$ and total suspended particle(TSP) were measured and compared with ventilation and humidification. As a result, the class room temperature distribution was $2{\sim}5^{\circ}C$ low during operating ventilation system and humidification. At 60% RH, PMV values of measuring points were ranged from +0.5 to -0.5 indicating optimal the range of thermal comfort. The average concentration of $CO_2$ gas and TSP were reduced 645 ppm, 0.17 mg/$m^3$ respectively, during operating the ventilation system. From the results, to maintain comfortable environment in the heated classroom, the ventilation and humidification were needed in winter season.

• The Korean Journal of Quaternary Research
• /
• v.11 no.1
• /
• pp.39-56
• /
• 1997

한국남해에 위치한 광양만의 서북부 내만 해역에서 표층수와 저층수의 부유물질 (TSM)의 총함량과 분포의 계절적 변화양상 그리고 부유입자의 조지극성(입자의 크기)이 연 구되었다,. 연구기간중 부유물질 함량분포는 계절별로 매우 뚜렷한 특징을 보였다, 특히 여 름철 저층수의 부유물질 함량이 만조선 해역에서 높게 측정되었다. 이러한 계절별 부유물질 함량분포의 변화 원인은 얕은 수심, 해저의 표층 퇴적상 그리고 조류의 동력적 조건(최고속 도)에 기인하는 것으로 사료된다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.133-136
• /
• 2004

In-situ collection experiments were performed to analyze inflowing sedilnents behavior as a basic study of topographical change in Nakdong River Estuary. Sediment rate and bed load flux ranged from 0.0004 to $0.472\;g/cm^2/day\;and\;0.0005\~1.7579\;g/cm^2/day$, respectively. The settling velocity of suspended particulate matter was estimated in tire range of $0.339\~1.010\;cm/sec$, The grain size analysis shows that surface sediments in backside of sandbar and bed load in front of dike have a similar grain size distribution. It is considered that the source of surface sediments in backside of sandbar were flowed in from Nakdong River. In order to verify the characteristics of inflowing sediments behavior, detailed surveys around Nakdong River Estuary need to be carried out, continuously.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1984.07a
• /
• pp.7-21
• /
• 1984

Entrainment and deposition experiments were counducted in fresh water on four groups of sediments: three well-defined sediments of uniform composition and narrow-size distribution (1 to 9 um, 10 to 50 um, and 50 to 90 um), and a fourth group which was a mixture of these three sediments. In the entrainment experiments and at a particular stress, the steady-state suspended sediment concentration of the coarse group was the lowest while the concentrations of the fine and medium groups were higher that that of the coarse group but were similar to each other. Deposition experiments generally showed an exponential decrease of suspended sediment concentration with time with the decay time being a function of particle size and applied stress.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.1
• /
• pp.57-63
• /
• 1994

In order to comprehension of the behaviour of PAHs in air which is known as carcinogens and/or mutagens suspended Particulates in ambient air were collected by Anderson air sampler from 1992. 6 to 1993. 5 in Seoul. Ten species of PAHs( Phen, An, Fl, R, Py, BaAn, BaP, Chry, BeP, DiB(a, h)An, I123p) were analyzed to understand monthly variations of PAHs distribution of PAHs concentration according to particle size, and correlation between PAHs and independent charactierstics of PAHs The highest concentration of TSP was 155.58$\mu\textrm{g}$/㎥ in May and the lowest was 60$\mu\textrm{g}$/㎥ in August. Concentration of TSP was more affected by coarse particles in spring, otherwise which was more affected by fine particles in winter. According to results of anaylsis of samples that were collected by Anderson air sampler, concentration of PAHs was more high in winter than that in summer. In almost samples collected by Anderson air sampler, concentration of PAHs was more high in coarse particles than in fine particles, but BaP well known as carcinogenic matter had more high concentration in fine particles(56-97.5%) than that in coarse particles(2.5-46%). Correlation between concentrations of TSP and PAHs was more high in fine Particles than in coarse Particles. Both fine particles and coarse particles have negative correaltion with radiation.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.2
• /
• pp.84-95
• /
• 2014

Recently, as a variety of techniques of CMF (Compressed media filter) that has advantages of high porosity and compressibility have been developed in the U.S. and Japan. Therefore, the interest of intensive wastewater treatment using CMF has grown. This study examined the feasibility of CMF with varying sewage water quality to determine the optimum operating conditions. A preliminary tracer test that investigated the filtering process under various compression and flow rate conditions was performed. In a high compression condition, different porosities were applied to each depth of the column. Therefore, a distinct difference between a theoretical value and results of tracer test was observed. For the TSS (Total suspended solid) removal and particle size distribution of CMF for pre-treatment water under the various compression conditions, the compression ratio of 30 percent as the optimal condition showed greater than 70% removal efficiency. In addition, the compression ratio of >15% was required to remove small-sized particles. Also, an additional process such as coagulation is necessary to increase the removal efficiency for < $10{\mu}m$ particles, since these small particles significantly influence the effluent concentration. Modeling results showed that as the compression rate was increased, TSS removal efficiency in accordance with each particle size in the initial filtration was noticeably observed. The modeling results according to the depth of column targeting $10{\mu}m$ particles having the largest percentage in particle size distribution showed that 150-300 mm in filter media layer was the most active with respect to the filtering.

• Journal of Environmental Health Sciences
• /
• v.21 no.2
• /
• pp.1-6
• /
• 1995

Authors investigated the size distribution and mass fraction of dusts in work environment of Changwon industrial complex. Size distribution of suspended dusts in welding and grinding processes were evaluated using ambient cascade impactors. The mass median diameters of dusts were 0.25 to $0.60 \mu m$ at welding sites and 1.20 to $1.92 \mu m$ at grinding sites. Respirable mass fractions were 63.68 to 73.50% at welding sites and 43.24 to 51.47% at grinding sites. Respirable fractions were calculated from the size distribution data for the ACGIH criteria by the respirable particle mass. In case of dust removal system, electrostatic precipitator and bag filter were appropriate for welding process and grinding process, respectively.