• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.470-475
• /
• 2009

본 연구에서는 유화중합을 이용한 수분산성 아크릴계접착제의 최적의 합성조건을 구하기 위하여 주단량체로 2-EHA(2-ethylhexyl acrylate), n-BA(n-butyl acrylate), MMA(methyl metacrylate), 기능성단량체로 2-HEMA(2-hydroxylethylmethacrylate), AAc(acrylic acid), 유화제로는 음이온성 유화제인 SLS(Sodium Lauryl Sulfate), 그리고 개시제로 APS(Ammonium persulfate)를 사용하여 전환율, 입자 크기, 박리강도, 유리전이온도에 대한 유화제, 개시제, 단량체 함량의 영향을 고찰하였다. 반응온도 $82^{\circ}C$, 유화제(SLS/monomer) 3.75%, 개시제(APS/monomer) 0.612%에서 95% 이상의 전환율을 얻을 수 있었고, 유화제나 개시제의 양이 너무 많을 때는 박리접착강도가 감소하는 경향을 보였으며, 65% 2-EHA/monomer, 20% BA/monomer, 10% MMA/monomer에서 최대 전환율과 최대 박리접착강도를 얻을 수 있었다.

• 한국응용과학기술학회지
• /
• 제31권1호
• /
• pp.7-13
• /
• 2014

양이온 에스테르형 계면활성제인 N-2-hydroxy-3-(2-hydroxyacetoxy)proply-N,N-dimethyl dodecylaminium chloride (HPDA)를 합성하였고, FT-IR 과 $^1H$-NMR 분석으로 확인하였다. 합성화합물의 묽은 수용액에 대하여 표면장력을 측정하고, 임계미셀농도를 산정하였다. 표면장력은 $10^{-3}{\sim}10^{-2}mol/L$ 농도 범위에서 33~34 dyne/cm 이었고, 표면장력법에 의해 산정한 임계미셀농도는 $8.5{\times}10^{-3}mol/L$ 이었다. 합성 계면활성제인 HPDA와 SLS, TTAB의 유화특성을 시험하였다. 그 결과 HPDA가 우수한 유화제로 확인되었다. 그리고 Ross-Miles 방법으로 기포력과 기포안정성도 측정하였다.

• 공업화학
• /
• 제32권3호
• /
• pp.260-267
• /
• 2021

본 연구에서는 코코넛 오일로부터 카르복실레이트계 음이온 계면활성제 SLEC-3을 합성하였으며, 합성된 계면활성제의 구조를 FT-IR, ¹H-NMR 및 ¹³C-NMR 분석을 통하여 확인하였다. 합성한 계면활성제 SLEC-3에 대하여 임계 마이셀 농도, 정적 및 동적 표면장력, 유화력, 거품 안정성 등의 계면 물성을 측정한 결과, 기존 세제 제품에서 널리 사용되는 음이온 계면활성제 SLES와 비교하여 계면 활성이 보다 우수하고 계면 에너지를 낮추는데 더 효과적이었다. 또한 SLCE-3에 대한 생분해성, 급성 경구 독성 및 급성 피부자극 시험을 실시한 결과, 저자극 및 저독성을 가지고 있기 때문에 세제 및 세정제 제품에 적용할 수 있을 것으로 판단되었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1310-1314
• /
• 2011

Sodium beta-alumina (SBA) nano-powders were synthesized by the citrate sol-gel process, and the effects of the cationic surfactant n-cetyltrimethylammonium bromide surfactant (CTAB) were investigated. The structure and morphology of the nano-powders were characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM) techniques, respectively. The effects of CTAB on the citrate sol-gel process and the SBA formation were investigated by thermo gravimetric/differential thermal analysis (TG/DTA) and Fourier transform infrared spectroscopy (FTIR). The conductivity of ceramic pellets of SBA was measured by electrochemical impedance spectroscopy (EIS). The results showed that the CTAB inhibited the agglomeration of SBA powders effectively and consequently decreased the crystallization temperature of SBA, about $150^{\circ}C$ lower than that of the sample without CTAB. The measured conductivity of SBA was $1.21{\times}10^{-2}S{\cdot}cm^{-1}$ at $300^{\circ}C$.

• 한국응용과학기술학회지
• /
• 제14권1호
• /
• pp.109-115
• /
• 1997

Fluorescent anionic oligo surfactants were synthesized by the condensing products of long chain alkylvinylether-maleic anhydride cooligomers and resorcinol including dye structures. Their various surface activities and dispersing action were studied on the aqueous solution. These oligo surfactants exhibited a remarkable surface tension lowering property, lower foaming and a large dispersing action for the particles of ${\alpha}-copper$ phthalocyanine blue. Further it was ascertained that the binding of oligo surfactant onto the pigment surface caused the deviation towards lower wavelengths at the maximum fluorescent intensity as compared with aqueous oligo surfactant solutions, These surface active properties of the oligo surfactants may be attributed to rigid and hydrophobic structure of dye groups, besides surface-active groups of alkylether groups and carboxylic group of the anionic oligo surfactants.

• 공업화학
• /
• 제3권2호
• /
• pp.273-279
• /
• 1992

콜레스테롤을 갖는 계면활성제를 합성하고 중합하여 고분자화된 vesicle들을 얻었으며, 이러한 vesicle들을 이용하여 콜레스테롤을 추출해 내는데 사용하였다. 콜레스테롤을 갖는 계면활성제와 두 개의 알킬사슬을 갖는 계면활성제를 50 : 50으로 혼합하여 vesicle을 형성시킨 후 중합하여 형성된 고분자화된 Vesicle이 각각의 계면활성제들을 사용한 경우와 비교하여 볼 때 콜레스테롤을 효과적으로 추출해 내었다. vesicle의 투과도도 50 : 50으로 혼합하여 형성시킨 경우가 가장 컸다. 그러므로 많은 양의 콜레스테롤을 함유하려면 어느정도의 여유 공간이 필요하다고 결론지을 수 있다.

• 한국표면공학회지
• /
• 제51권1호
• /
• pp.79-85
• /
• 2018

We systematically investigated the optical properties of sub-micron sized methylammonium lead tribromide ($CH_3NH_3PbBr_3$) cubes in the range of 100 to 700 nm, which were prepared by a surfactant-free precipitation method. We found that despite the strong absorbance, their photoluminescence quantum yield (PLQY) is very low as 0.009~0.011 % for whole range of sizes. Surfactant-free synthesis approach results in nanocubes that has no surface passivating reagents (e.g. surfactants) on their surface. As-prepared particles contain a large number of surface defects that may cause the low PLQY. The role of the surface defects were investigated in their photoluminescence decay process, which can be correlated with the particle size. Larger particles are characterized by a slower decay rate compared to smaller particles due to a large number of surface defects in the smaller particles that trap more excitons in the fluorescence decay process. These experimental results provide new insights into the fundamental relationship between surface state and optical properties.

• 한국응용과학기술학회지
• /
• 제12권1호
• /
• pp.93-99
• /
• 1995

미셀반응, 유화중합, 상간이동촉매반응 등에 이용되는 계면활성제가 갖고 있는 문제점을 해결하기 위하여 반응 후 분해되는 분해성 계면활성제를 합성하였다. 케탈이나 아세탈반응에 의하여 이루워진 1,3-디옥솔란 고리가 산수용액 중에서 불안정해 쉽게 가수분해로 계면활성을 띠지 않는 분해성 계면활성제를 합성하였다. 합성된 화합물은 백색결정상태로 얻었으며 수율은 90% 이상이었다. 그리고 이 화합물과 중간생성물은 얇은막 크로마토그래피와 컬럼 크로마토그래피로 분리하여 적외선과 수소핵자기공명 및 원소분석 스텍트라로 그 화합물들의 구조를 확인하였다.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.72-79
• /
• 2018

Hybrid F2HX surfactants bearing a sulfate moiety and both hydrocarbon and fluorocarbon chains were prepared by the reaction of alkyl glycidyl ethers with fluoro-alcohol, and subsequent sulfation. The fluorocarbon number in F2HX was fixed at the shortest number possible (i.e., 2), while the hydrocarbon number (X) in the second chain was varied between 2, 4, 6, and 8. Their surface-active properties and emulsion stabilities were systematically estimated as a function of the X. Among them, F2H8 exhibited the optimal surfactant performance, which was comparable to previously reported surfactants and it was successfully applied in the emulsion polymerization of vinylidene fluoride.

• 한국환경과학회지
• /
• 제22권7호
• /
• pp.837-845
• /
• 2013

This study was designed to synthesize mesoporous carbon, porous carbonic material and to characterize its surface in an attempt to adsorption methane gas($CH_4$). Synthesis of mesoporous carbon was carried out under two steps ; 1. forming a RF-silica complex with a mold using CTMABr, a surfactant, and TEOS, raw material of silica, and 2. eliminating silica through carbonization and HF treatment. The mesoporous carbon was synthesized under various conditions of synthesis time and calcination. Eight different types of mesoporous carbon, which were designated as MC1, MC2, MC3, MC4, MCT1, MCT2, MCT3, and MCT4, were prepared depending upon preparation conditions. The analysis of mesoporous carbon characteristics showed that the calcination of silica stabilized the mixed structure of silica and carbonic complex, and made the particle uniform. The results also showed that hydrothermal synthesis time did not have a strong influence on the size of pore. The bigger specific surface area was obtained as the hydrothermal synthesis time was extended. However, the specific surface area was getting smaller again after a certain period of time. In adsorption experiments, $CH_4$ was used as adsorbate. For the case of $CH_4$, MCT3 showed the highest adsorption efficiency.