• 한국항만학회지
• /
• 제10권1호
• /
• pp.53-61
• /
• 1996

This paper describes the effect of wave control using submerged flat plate by the numerical calculation and the hydraulic model test. The boundary element method is used to develop a numerical solution for the flow field caused by monochromatic oblique waves incident upon an infinitely long, sumerged flat plate situated in arbitrary water depth. The effect of wave blocking is examined according to the change of length, submerged depth of flat plate and incident angles. Numerical results show that longer length, shallower submergence of flat plate and larger incident angles enhance the effect of wave blocking. To validate numerical analysis method, hydraulic model test was conducted in 2-D wave flume with 60 cm metal sheet. Reflected waves are extracted from water surface elevation in front of the location of a submerged plate by least square method with 3 wave gages. From comparing experimental results with numerical results, efficiency of numerical analysis method by this study could be confirmed well within wide ranges of wave frequencies.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.384-391
• /
• 2005

Three dimensional finite difference elastic wave model was developed to estimate the feasibility of surface wave applications in geotechnical problems. The wave motions calculated by the developed program in this study shows good agreement with well known analytic solutions. The surface wave motions calculated from layered dam type structure can be interpreted as a infinite layer structure using dispersion curve but it is need a special source of which high energy in frequency band lower than 10 Hz to get information of physical properties in few tens meter deep. The source which has high energy in the low frequency band, however, can give defect on dam and this will make some limitation in real field applications. The dispersion curves calculated from the surface wave motion of homogeneous and center core type dam models will give rise to fatal errors if the conventional infinite layer structure used in their interpretation because the surrounding materials and boundaries of dam make some distortion in dispersion curve of surface wave. So it is strongly recommended to use three dimensional inversion model for correct interpretation and estimation of physical properties of dam materials.

• 한국수자원학회논문집
• /
• 제30권3호
• /
• pp.225-233
• /
• 1997

부체의 장주기동요, 연안구조물과 계류선의 파괴 등과 같은 역기능으로 인해 파군현상의 정확한 해석은 시급한 과제라 하겠다. 본고에서는 연안계에서 발생하는 파랑과 가장 근접한 비선형불규칙 파랑계를 산정하여 해안구조물의 피로거동에 지대한 영향을 미치는 파군당 파랑의 수와 해안구조물의 first excursion failure mode를 결정하는 high run에서의 파랑수를 중심으로 파군현상을 해석하였다. 해석과정에 mapping technique과 유의파경사를 perturbation parameter로 섭동이론이 사용되었다. 해석결과 Gaussian wave계에서 균등분포하는 것으로 알려진 위상함수는 평균값 주위에 집중분포하였고, 그 정도는 비선형성이 증가할수록 심화되었다. threshold crossing rate의 경우 비선형성이 심화될수록 평균해수위보다 큰 쪽으로 분포형이 이동하였으며 파군당 파랑수와 high run에서의 파랑수도 비슷한 경향을 보여 최근 설치범위가 심해쪽으로 확대되는 해안구조믈의 경우 피로거동에 대한 보강이 요만된다.

• 한국수자원학회논문집
• /
• 제33권2호
• /
• pp.181-193
• /
• 2000

본 논문에서는 파랑이 존재할 때 모래결위에서의 흐름과 부유사의 거동에 관하여 기술한다. 새로운 수치모형시스템을 구축하였으며 이를 규칙파랑을 이용한 기존 실험실 실험조건과 가상적불규칙파랑조건에 적용하였다. 흐름장 계산은 SMAC 방법에 근거한 프로그램 SOLA를 Kim 등(1994)이 일부 수정하여 제시한 프로그램을 사용하였다. 흐름계산 부모형은 x-z 면에서의 연속방정식과 Reynolds의 운동방정식을 기본방정식으로 한다. 흐름부모형으로 파랑궤적도, 전단응력, 압력의 분포를 계산하였다. 모형실험결과 중 수직방향궤적도는 관측자료와 잘 일치하였다. 퇴적물이동 부모형은 부유사의 이류확산을 나타내는 식을 기본방정식으로 한다. 수치기법은 분리기법을 이용하며, 모래결 표면으로부터 퇴적물이 연행되어 유체내로 투입된다. 규칙파랑 실험조건에 수치모형을 적용한 결과, 부유사농도의 연직분포가 Deltaflume의 실험자료와 유사하게 재현되었다. 가상적인 불규칙 파랑조건에 모형을 적용한 결과 부유사농도의 높게, 부유사확산 범위가 더 넓게 예측되었다.

• Journal of Ship and Ocean Technology
• /
• 제7권3호
• /
• pp.1-12
• /
• 2003

The influence of nonlinear phenomena on the behavior of stationary forced flexural-gravity waves on the surface of deep water is investigated, when the perturbation of external pressure moves with near-resonant velocity. It is shown that there are three branches of bounded stationary solutions turning into asymptotic solutions of the linear problem with zero initial conditions. For the first time ice sheet destruction by turbulent fluctuations of atmosphere pressure in ice adjacent layer in wind conditions is studied.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.71-74
• /
• 1995

A numerical model capable of simulating a 2-D airfoil flying over in the vicinity of the waves is discussed. Instead of treating the problem as a heaving oscillation one above the rigid flat wall, sources are distributed on the prescribed wave profile. The wave deformation due to the airfoil is assumed to be negligible and treated as a rigid undulated wall. The source and vortex are distributed on the surface of the foil. It is found that the variation of $C_L$ with wave steepness in severe and that the lift variation due to waves decreases as the wing height above the water surface increases.

• Journal of Ship and Ocean Technology
• /
• 제5권2호
• /
• pp.50-61
• /
• 2001

In this paper, nonlinear interactions between water waves and a horizontally submerged circular cylinder are numerically simulated. In this case, the nonlinear interactions between them generated a wave breaking phenomenon. The wave breaking phenomenon plays an important role in the wave farce. Negative drifting forces are raised at shallow submerged cylinders under waves because of the wave breaking phenomenon. For the numerical simulation, a finite difference method based on the unsteady incompressible Navier-Stokes equations and the continuity equation is adopted in the rectangular grid system. The free surface is simulated with a computational simulation method of two-layer flow by using marker density. The results are compared with some existing computational and experimental results.

• Earthquakes and Structures
• /
• 제18권6호
• /
• pp.743-752
• /
• 2020

The phenomenon of reflection and transmission of plane waves at an interface between fluid half space and orthotropic piezothermoelastic solid half-space with two-temperature has been investigated. Energy ratios of various reflected and transmitted waves are computed with the use of amplitude ratios. The law of conservation of energy across the interface has been justified. It is found that the energy ratios are the functions of angle of incidence, frequency of independent wave and depend on the different piezothermoelastic material. A piezothermoelastic material has been considered which is in welded contact with water. Variations of energy ratios corresponding to the reflected waves and transmitted waves are computed and shown graphically for the two different models. A particular reduced case of interest is also discussed.

• Smart Structures and Systems
• /
• 제18권6호
• /
• pp.1145-1167
• /
• 2016

This study presents a new method to computes analytical fragility curves of a structure subject to tsunami waves. The method uses dynamic analysis at each stage of the computation. First, the smooth particle hydrodynamics (SPH) model simulates the propagation of the tsunami waves from shallow water to their impact on the target structure. The advantage of SPH over mesh based methods is its capability to model wave surface interaction when large deformations are involved, such as the impact of water on a structure. Although SPH is computationally more expensive than mesh based method, nowadays the advent of parallel computing on general purpose graphic processing unit overcome this limitation. Then, the impact force is applied to a finite element model of the structure and its dynamic non-linear response is computed. When a data-set of tsunami waves is used analytical fragility curves can be computed. This study proves it is possible to obtain the response of a structure to a tsunami wave using state of the art dynamic models in every stage of the computation at an affordable cost.

• 조명전기설비학회논문지
• /
• 제20권4호
• /
• pp.37-42
• /
• 2006

본 논문에서는$CO_2$를 발생시키지 않고 물로부터 직접 수소를 제조하기 위하여 비열플라즈마를 이용하였다. 다중침-평판형(Multineedle-plate electrode geometry reacto: MPER)과 단일침-평판형(Needle-plate electrode geometry reactor: NPER) 두종류의 수소제조 반응기를 설계 제작하여 수소 발생에 미치는 영향에 대하여 실험하였다. 수소발생을 높이기 위해서는 강한 아크성 스트리머 방전 발생과 효과적인 수표면 방전을 위한 수표면 조건을 고려해야만 된다.