• Journal of the Korea Society for Simulation
• /
• v.32 no.4
• /
• pp.41-58
• /
• 2023

As naval warfare changes to composite warfare that includes simultaneous engagements against surface, underwater, and air enemies, performance and tactical analysis are required to respond to naval warfare. In particular, for practical analysis of composite warfare, it is necessary to study engagement simulations that can appropriately utilize the limited performance resources of the detection system. This paper proposes a DEVS (Discrete Event Systems Specifications)-based simulation model for composite warfare analysis. The proposed model contains generalized models of combat platforms and armed objects to simulate various complex warfare situations. In addition, we propose a detection performance allocation algorithm that can be applied to a detection system model, considering the characteristics of composite warfare in which missions must be performed using limited detection resources. We experimented with the effectiveness of composite warfare according to the strength of the detection system's resource allocation, the enemy force's size, and the friendly force's departure location. The simulation results showed the effect of the resource allocation function on engagement time and success. Our model will be used as an engineering basis for analyzing the tactics of warships in various complex warfare situations in the future.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.519-533
• /
• 2023

In this study, the linear cutting tests of pick cutters were carried out on a granitic rock with the average compressive strength over 100 MPa. From the tests, the correlation between the cutter acting force and the temperature measured by infrared thermal imaging camera during rock cutting was analyzed. In every experimental condition, the maximum temperature was measured at the rock surface where the chipping occurred, and the temperature generated in the rock was closely correlated with the cutter acting force. On the other hand, the temperature of a pick cutter increased up to only 36℃ above the ambient temperature, and the correlation with the cutter force was not obvious. This can be attributed to the short cutting distance under laboratory conditions and the high thermal conductivity of the tungsten carbide inserts. However, the relatively high temperature of the tungsten carbide inserts was found to be maintained. Therefore, it is recommended that a reinforcement between the insert and the head of a pick cutter or the quality improvement of silvering brazing in the production of a cutter is necessary to maintain the high cutting performance of a pick cutter.

• Animal Bioscience
• /
• v.37 no.3
• /
• pp.500-508
• /
• 2024

Objective: Due to current selection practices for increased egg production and peak persistency, the production profile, age at maturity, and body weight criteria for commercial layers are constantly changing. Body weight and age at the time of photostimulation will thus always be the factors that need to be adequately addressed among various production systems. The current study was carried out to determine the effects of pullets' body weight (low, medium, and heavy) on their performance, welfare, physiological response, and hormonal profile. Methods: With regard to live weight, 150 16-week-old pullets were divided into three groups using a completely randomized design (CRD) and held until the 50th week. One-way analysis of variance was used to evaluate the data under the CRD, and the least significant difference test was used to distinguish between treatment means. Results: In comparison to the medium and light birds, the heavy birds had higher body weight at maturity, an earlier age at maturity, and higher egg weight, eggshell weight, eggshell thickness, egg yolk index, breaking strength, egg surface area, egg shape index, egg volume, and hormonal profile except corticosterone. However, the medium and light birds had lower feed consumption rates per dozen eggs and per kilogram of egg mass than the heavy birds. Light birds showed greater body weight gain, egg production, and egg specific gravity than the other categories. At 20 weeks of age, physiological response, welfare aspects, and catalase were non-significant; however, at 50 weeks of age, all these factors-aside from catalase-were extremely significant. Conclusion: The findings of this study indicate that layers can function at lower body weights during photostimulation; hence, dietary regimens that result in lighter pullets may be preferable. Additionally, the welfare of the birds was not compromised by the lighter weight group.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.12 no.4
• /
• pp.370-379
• /
• 2007

Short-term variations of phytoplankton community structure in the southeast coastal waters of Korea from July to September in 2006 were investigated with data set of phytoplankton, chemical and physical water properties, and meterological data. A total of 11 sampling sites of 4 different depths (surface, 5 m, 10 m, and bottom) were visited on July 11-14, July 24-26, August 7-10, August 21-24 and September 5-8. We identified 151 species in 63 genera of phytoplankton in which diatoms were the most diverse group composed of 92 species in 37 genera. Dinoflagellates were the second diverse group of 52 species in 22 genera. The other groups include 7 species in 4 genera including Raphidophytes, and Euglenophyta. After rainy season, excessive nutrients from adjacent streams to the stratified water column proliferates Chaetoceros group in July. But biomass of phytoplankton and nutrient concentrations were decreased during the period of a drought in August. However, Chaetoceros was the most dominant genera in all depths of the first, second, third and fifth cruises, except the 4th cruise on August 21-24 when dominant group were dinoflagellates including Gymnodinium spp. and Cochlodinium polykrikoides. The characteristic of phytoplankton community and environment condition during summer 2006 can be summarized as: 1) low concentration of nutrients caused by a long lasting drought in August 2) no summer outbreak of C. polykrikoides because the strength of offshore waters was weak than other years, and 3) Chaetoceros spp. was the dominant species despite short period appearance of dinoflagellates.

• Clean Technology
• /
• v.30 no.2
• /
• pp.145-156
• /
• 2024

Carbon has a large specific area and excellent chemical stability, so research on its use as a catalyst support is actively conducted. When using carbon as a support, the pretreatment process is essential. Through pretreatment of carbon, the growth of metal nanoparticles can be controlled and the bonding strength between the support and metal particles can be improved. In this study, carbon was pretreated for surface modification and 5 wt% Pd/C catalysts were synthesized using it as a support. Catalytic activity was evaluated through phenol hydrogenation. To compare with nitric acid, which is commonly used in carbon pretreatment, carbon pretreatment was performed using organic acid. Pd/C treated with gluconic acid showed the highest activity, with 94.93% phenol conversion and 92.76% cyclohexanone selectivity. Therefore, it is expected that pretreatment of the carbon support using organic acid will not only overcome the disadvantages of inorganic acid treatment but also improve catalyst performance.

• Korean Journal of Environmental Biology
• /
• v.41 no.4
• /
• pp.370-385
• /
• 2023

Cyanobacterial harmful algal blooms (Cyano-HABs) are an international environmental problem that negatively affects the ecosystem as well as the safety of water resources by discharging cyanotoxins. In particular, the discharge of microcystins (MCs), a highly toxic substance, has been studied most actively, and various water treatment methods have been proposed for this purpose. In this paper, we reviewed adsorption technology, which is recognized as the most feasible, economical, and efficient method among suggested treatment methods for removing MCs. Activated carbons (AC) are widely used adsorbents for MCs removal, and excellent MCs adsorption performance has been reported. Research on alternative adsorption materials for AC such as biochar and biosorbents has been conducted, however, their performance was lower compared to activated carbon. The impacts of adsorbent properties(characteristics of pore surface chemistry) and environmental factors (solution pH, temperature, natural organic matter, and ionic strength) on the MCs adsorption performance were also discussed. In addition, toward effective control of MCs, the possibility of the direct removal of harmful cyanobacteria as well as the removal of dissolved MCs using adsorption strategy was examined. However, to fully utilize the adsorption for the removal of MCs, the application and optimization under actual environmental conditions are still required, thereby meeting the environmental and economic standards. From this study, crucial insights could be provided for the development and selection of effective adsorbent and subsequent adsorption processes for the removal of MCs from water resources.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.4
• /
• pp.67-76
• /
• 2013

Landfill require special care due to the dangers of nearby surface water and underground water pollution caused by leakage of leachate. The leachate does not leak due to the installation of the geomembrane but sharp wastes or landfill equipment can damage the geomembrane and therefore a means of protecting the geomembrane is required. In Korea, in accordance with the waste control act being modified in 1999, protecting the geosynthetics liner on top of the slope of landfill and installing a drainage layer to fluently drain leachate became mandatory, and technologies are being researched to both protect the geomembrane and quickly drain leachate simultaneously. Therefore, this research has its purpose in studying the drainage functions of leachate and protection functions of the geomembrane in order to examine the application possibilities of Geo-Multicell-Composite (GMC) as a Leachate Collection Removal and Protection System (LCRPs) at the slope on top of the geomembrane of landfill by observing methods of inserting filler with high-quality water permeability at the drainage net. GMC's horizontal permeability coefficient is $8.0{\times}10^{-4}m^2/s$ to legal standards satisfeid. Also crash gravel used as filler respected by vertical permeability is 5.0 cm/s, embroidering puncture strength 140.2 kgf. A result of storm drain using artificial rain in GMC model facility, maxinum flow rate of 1,120 L/hr even spray without surface runoff was about 92~97% penetration. Further study, instead of crash gravel used as a filler, such as using recycled aggregate utilization increases and the resulting construction cost is expected to savings.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.297-302
• /
• 2017

Recently, building materials and air purification filters with eco-friendly charcoal are actively studying to reduce the concentration of radon gas in indoor air. In this study, radon reduction performance was assessed by designing and producing new panel-type activated carbon filter that can be handled more efficiently than conventional charcoal filters, which can reduce radon gas. For the fabrication of our panel-type activated carbon filter, first the pressed molding product after mixing activated carbon powder and polyurethane. Then, through diamond cutting, the activated carbon filter of 2 mm, 4 mm and 6 mm thickness were fabricated. To investigate the physical characteristics of the fabricated activated carbon filter, a surface area and flexural strength measurement was performed. In addition, to evaluate the reduction performance of radon gas in indoor, the radon concentration of before and after the filter passes from a constant amount of air flow using three acrylic chambers was measured, respectively. As a result, the surface area of the fabricated activated carbon was approximately $1,008m^2/g$ showing similar value to conventional products. Also, the flexural load was found to have three times higher value than the gypsum board with 435 N. Finally, the radon reduction efficiency from indoor gas improved as the thickness of the activated carbon increases, resulting in an excellent radon removal rate of more than 90 % in the 6 mm thick filter. From the experimental results, the panel-type activated carbon is considered to be available as an eco-friendly building material to reduce radon gas in an enclosed indoor environment.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.4
• /
• pp.255-265
• /
• 1999

CTD castings and current observations are taken in June, July and October, 1997 and May and July, 1998 to investigate the effect of the Keum River dyke on the structure of physical properties and the type of the Keum River estuary. Tide and tidal current relation shows that the ebbing is longer than the flooding by 1.5 hours with the early current reversing before high tide. In the rainy season (May to July), frequent large fresh water discharge during the ebbing from the dyke changes vertical salinity difference and time variation of salinity greatly near the head of the estuary, where salinity becomes lower than 2‰ in summer fresh water flooding. Halocline developed by the fresh water discharge makes two-layer structure, of which strength and depth increase in the low tide. The relationship between tide phase and surface salinity variation shows the phase lag of 2.5 hours near the head of the estuary but the standing wave relation down the estuary. This phase lag implies that a low salinity water diluted by the fresh water discharge for 2-3 hours in the ebb period moves with tidal excursion. In the dry season, vertical salinity difference reduces significantly. We calculate stratification and circulation parameters using the observed salinity structure, surface current and fresh water discharge. The Keum River estuary shows a partially mixed type, changing the stratification parameter from the rainy to the dry season. Mean flows of observed tidal current at lower and upper layer are landward and seaward, which are consistent with the circulation of a partially mixed estuary. Based upon the estuary type and circulation we suggest that the suspended materials will move toward the upstream due to low-layer mean flow and then the Keum River estuary will be a deposit environment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.4
• /
• pp.305-315
• /
• 1983

A survey was carried out from July to December in 1979 and 1982 for the investigation of oceanographic conditions and phytoplankton in Seogwipo coastal area. Although a peculiar coastal sea water is formed by in flowing of fresh water, this is developed mainly in summer and disappeared or weakened in its strength after November. However, this coastal sea water covers only the surface while in mid and bottom layer open sea water is approached to the coast. Therefore, coastal and open sea water appears simultaneously in narrow sea area. Mean values of nutrient concentrates on surface layer during investigating period were $3.72{\sim}16.34{\mu}g-at/l$ in silicate, $1.98{\sim}5.53{\mu}g-at/l$ in nitrate and $0.34{\sim}0.90{\mu}g-at/l$ in phosphate. These showed slight differences among places but in general coastal side were lower than open sea side. Phosphates which is the lowest in concentrates among nutrients in Seogwipo coastal area shows almost similar value with Jinhae Bay but higher than open sea water around 10 mile south of Seogwipo. In general, seasonal changes of nutrients in investigating period shows a tendency of the lowest in October, increasing in November, and again slight decrease in December. As a phytoplankton fauna, 48 species, 1 variety and 2 breeds of Diatoms, 29 species, 3 varieties and 1 breed fo Dinoflagellates, and 1 species each of Chroococcus and Trichoceratium were found. Monthly predominant species are all neritic: Rhizosolenia sp. and Ceratium sp. in August, Chaetoceros sp., Ceratium sp. and Peridinium sp. in September, Astrionella sp. and Peridinium sp. in October, Astrionella sp., Navicula sp. and Chaetoceros sp. in November Among these, Rhizosolenia alata f. gracillima in August and Astrionella gracillima in November are remarkable predominant.