• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.2
• /
• pp.252-263
• /
• 1997

Temperature and salinity were observed in Kugum Suro Channel in February, April, August and October 1993. Temperature ranged from $7.0^{\circ}C\;to\;25.0^{\circ}C$ throughout the year and its variation was about $18^{\circ}C$. The maximum temperature difference between surface and bottom was less than $0.75^{\circ}C$ for a year, which meant that the temperature stratification in Kugum Suro Channel was considerably week. Salinity had also a small variation range of less than $0.5\%_{\circ}$. Salinity varied from $34.0\%_{\circ}$ in April to $30.0\%_{\circ}$ in August and its fluctuation patterns were quite similar to the seasonal variations of the precipitation and the duration of sunshine observed at Kohung Weather station. Seasonal variation of sea water density in T-S diagram showed that the water mass in Kugum Suro Channel could be largely affected by regional atmospheric conditions. Temperature increased in ebb tide and decreased in flood tide, but salinity decreased in ebb tide and increased in flood tide for a day. The period of fluctuations in temperature and salinity measured for 25 hours was nearly coincident with the semi-diurnal tide which was predominant in that region. Stratification parameters computed in Kugum Suro Channel areas were less than $4.0J/m^3$ the year round, which indicated that vortical mixing from the bottom boundary caused by tidal current played an important role in deciding the stratification regime in Kugum Suro Channel. In estimating the equation which defines stratification and mixing effects in the observed areas, the tidal mixing term ranged from $4.7J/M^3\;to\;14.1J/m^3$ was greater than any other terms like solar radiation, river discharge and wind mixing.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.259-266
• /
• 1998

A study on the biological and chemical characteristics in the middle last Sea of Korea was carried out at 31 stations in October $11\~18$, 1995 on board the R/V Tam-Yang. The chlorophyll a concentration, new and regenerated production, and the vertical diffusion of nitrate from the thermocline structure were investigated. From the vertical distribution of chlorophyll a, subsurface maxima were observed near the thermorline at most stations including the frontal zone, except at the southern stations where the maximum chloropyll a concentration occurred at the surface, The nanophytoplankton was the most dominant fraction comprising $83.5\%$ of total phytoplankton cell numbers, but netphytoplankton were common at the southern stations where the dominant species were Rhizosolenia sp. Nitrogenous new production and regenerated productions were measured using the stable isotope $^{15}N$ nitrate and ammonia uptake method. The vertically integrated nitrogen production varied between 8.470 and $72.945\;mg\;N\;m^{-2}\;d^{-1}$. The f-ratio, which is the traction of new production from primary production, waried between 0.03 and 0.72, indicating that $3\%$ to $72\%$ of primary production was supported by the input of nutrients from below the euphotic zone and the rest are supported by ammonia recycled within the euphotic layer. This range of f-ratio encompasses from extremely oligotrophic to eutrophic area characteristics. The differences in productivity and f-ratio among stations were related to frontal structure and the bottom topography. The values were high near the frontal zone and low outside of it, and the station near Ulleng Island showed the highest f-ratio. Vertical diffusion coefficients were calculated from both the water column stability (Kz-1) of King and Devol's equation (1979) and new nitrogen requirement (Kz-2). The values of Kz-2 ($0.11\~0.55\;cm^2/s$) were relatively low compared to the values reported previously.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.4
• /
• pp.404-412
• /
• 1994

Radium isotopes were measured together with oceanographical parameters in the southern coastal region of the Korean East Sea during the period of September $2{\sim}8$, 1991. In September, there were various water masses vertically distributed in this region due to formation of strongly seasonal thermoclines. These water masses were characterized by activity of radium isotopes as well as water temperature and dissolved oxygen. Among the water masses, Japan Sea Proper Water(JSPW) below $1^{\circ}C$ had the highest Ra-226 activities but the lowest Ra-228 concentrations. However, Tsushima Surface Water (TSW) above $20^{\circ}C$ in water temperature had the highest Ra-228 which decreased sharply with depth. In TSW, Ra-228 activities were in the range of $194{\sim}270$ dpm/kl, which were approximately 10 times higher than JSPW. Activity ratios(A.R's) of Ra-228/Ra-226 were $1.9{\sim}2.6$ for TSW, $0.7{\sim}1.1$ for Tsushima Middle Water(TMW) of $12{\sim}17^{\circ}C\;to\;0.4{\sim}0.7$ for North Korea Cold Water(NKCW) with $1{\sim}7^{\circ}C$ and below 0.2 for JSPW. The Ra-228/Ra-226 ranged from 0.6 to 0.9 in the cold waters of $2{\sim}6^{\circ}C$, which were observed at depth of $65{\sim}120\;m$ in this study area. Radium isotopes provided a useful means of identifying origins of the cold water which occurred annually at intermediate or bottom layers in the southern coastal zone of the Korean East Sea. By plotting radium isotopes against water temperature, it could be observed clearly that the cold waters between $2{\sim}6^{\circ}C$ did not originate from the mixed water of JSPW and TMW but from NKCW.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.20 no.1
• /
• pp.29-35
• /
• 2010

To compare the quality of manufactured goods distributed in the domestic markets, 6 isolates of Dongchongxiacao products, namely, 4 Paecilomyces tenuipes specimens (J2P, 901A, 901B, and 901C), 1 Cordyceps militaris specimen (901D), and 1 Cordyceps sinensis specimen (CI-1), were analyzed for their physicochemical properties and sequence-structure relationships. P. tenuipes (J2P), a kind of Dongchongxiacao, was successfully inoculated on silkworms by percutaneous infection of Rural Development AdminstraionNam et al., 1999); fruiting bodies were then formed on the complete surface of the pupa. Since P. tenuipes (J2P) from silkworm larva was also proved to have remarkable pharmacological activities, it has been produced in bulk and has been successfully sold to buyers in the Korean market. Additionally, imitation products such as 901A, 901B, 901C, 901D, and CI-1 were sold simultaneously, resulting in deterioration of product quality. This research focuses on establishing quality standards to discriminate between the original and imitation products circulating in the market. The products obtained for the experiments included J2P, 901A, 901B, 901C, 901D, and CI-1; proximate analysis was performed for these products. The hosts and methods of conidia inoculation for proliferation of mycelia differed among the products. P. tenuipes (J2P) was proliferated in live silkworm larvae, and dead silkworm pupae were used to produce 901A, 901B, and 901C. On the other hand, 901D was produced on hulled rice medium. Quality analysis of C. sinensis revealed that CI-1, which was imported from China, smelled bad and proved to be a counterfeit with the fruiting body glued to the insect by twigs. The results of the proximate analysis of 901A, 901B, 901C, and 901D were similar to those of J2P with respect to the moisture content. Otherwise, J2P contained higher crude protein than 901A, 901B, 901C, and 901D, but contained very low fat. C. militaris (901D) and C. sinensis (CI-1) had low crude protein content-12.79% and 9.78% respectively-as compared to that of J2P, which was 62.38%. In contrast to the crude ash content of 6.4% in J2P, the crude ash content of CI-1 was 18.51% and this specimen was found to contain many impurities. phylogenetic analysis of P. tenuipes revealed that the sequence similarity of J2P, 901B, and 901C was in the range of 92.3~92.7%. Additionally, differences in the sequences were found at the positions 65 bp, 436 bp, 441 bp, 463 bp, etc.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.197-203
• /
• 2002

The TiO$_2$ coating solutions were synthesized with different concentrations (T1-0.7N, T2-2.0N) of hydrochloric acid used as catalyst. and TiO$_2$ thin films were prepared by sol-gel dip coating. Their structural and optical properties were examined as a function of calcination temperature. XRD results showed that T1 thin films calcined at 400~80$0^{\circ}C$ had the anatase phase, while those calcined at 100$0^{\circ}C$ had the rutile phase. T2 thin films calcined at 40$0^{\circ}C$ and $600^{\circ}C$ had the anatase phase, with the rutile phase for calcination at 80$0^{\circ}C$. Crystallinity of T2 thin films was superior to that of T1 thin films. The crystallite size of TiO$_2$ thin films increased with increasing calcination temperature, and the crystallite size of anatase phase in T2 thin films was larger than that in T1 thin films, but the crystallite size of rutile phase in T2 thin films was smaller. The surface morphology of the films showed that the films were formed more densely in the rutile phase than in the anatase phase, this phenomenon appeared conspicuously in T2 thin films. The transmittance of the samples with thin films on quartz glass calcined at 100$0^{\circ}C$ was significantly reduced at wavelength range about 300-700 nm due to the increased absorption originating from the change of crystallite phase and composition of the films and the scattering effect originating from increasing crystallite size. The refractive index of TiO$_2$ thin films increased, and hence the film thickness as well as the porosity of TiO$_2$ thin films decreased with increasing calcination temperature. Furthermore, the refractive index of T2 thin films was higher than T1 thin films, and porosity of T2 films was lower.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.193-204
• /
• 1998

The single crystal of the $LiTaO_3$has large electro-optic effects, so it is applied to optical switch, acousto-optic deflector, and optical memory device as hologram using photorefractive effect. In this study, optic-grade undoped $LiTaO_3$and Fe:LiTaO$LiTaO_3$single crystals were grown by the Czochralski method and optical transmission and absorption spectrums were measured in the wavelength of UV-VIS range. The curie temperature was determined with DSC and by measuring capacitance for the grown undoped crystal and ceramic powder samples of various Li/Ta ratio. In case of having a 48.6 mol% $Li_2O$ as a starting Li/Ta ratio, the results of concentration variations were below 0.01 mol% $Li_2O$ all over the crystal, so it was confirmed that $LiTaO_3$single crystals were grown under congruent melting composition having optical homogeneity. The curie temperature of the Fe:$LiTaO_3$crystal was increased with increased with increased doped Fe concentrations;by the ratio of $7.5^{\circ}C$ increase per Fe 0.1 wt%. Also, the optical transmittance was about 78 %, which was sufficient for optical device.

• Journal of the Korean earth science society
• /
• v.28 no.1
• /
• pp.64-74
• /
• 2007

The marine seismic prospecting using a research vessel in the shallow sea near the coastal area has certain limits according to the water depth and survey environment. Also, for the electrical resistivity survey at seashore area, one may need a specially designed high-voltage source to penetrate the very conductive surface layer. Therefore, we have conducted a feasibility study on the application of magnetotelluric method (MT), a passive geophysical method, on investigating of shallow marine environment geology. Our study involves both theoretical modeling and field survey at the tidal flat area which represent the very shallow marine environment. We have applied the audio-frequency magnetotelluric (AMT) method to the intertidal deposits of Gunhung Bay, west coast of Korea, and analysed the field data both qualitatively and quantitatively to investigate the morphology and sedimentary stratigraphy of the tidal flat. The inversion of AMT data well reveals the upper sedimentary layer of Holocene intertidal sediments having a range of 13-20 m thickness and the erosional patterns at the unconformable contact boundary. However, the AMT inversion results tend to overestimate the depth of basement (30-50 m) when compared with the seismic section (27-33 m). Since MT responses are not significantly sensitive to the resistivity of middle layer or the depth of basement, the AMT inversion result for basement may have to be adjusted using the comparison with other geophysical information like seismic section or logging data if possible. But, the AMT method can be an effective alternative choice for investigating the seashore area to get important basic informations such as the depositional environment of the tidal flat, sea-water intrusion and the basement structure near the sea shore.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.313-320
• /
• 2020

Purpose: The purpose of this study was to evaluate the machining precision and the marginal and internal fit of single restorations fabricated with three types of lithium disilicate ceramic blocks and to evaluate the correlation. Materials and methods: Single restorations were designed using a CAD software program. The crown designed model file was extracted from the CAD software program. Three types of lithium disilicate blocks (Rosetta; HASS, IPS e.max CAD; Ivoclar vivadent, VITA Suprinity; VITA) were milled using a milling machine. For the fabrication of the crown scanned model file, the intaglio surface of the restoration was digitized using a contact scanner. Then, using the three-dimensional inspection software (Geomagic control X; 3D Systems), the process of the overlap of the crown designed model and the scanned model and 3-dimensional analysis was conducted. In addition, the marginal and internal fit of the crowns was evaluated by a silicone replication method. The difference among three types of single ceramic crown was analyzed using a Kruskal-Wallis H test, and Spearman correlation analysis was performed to analyze the correlation between machining precision and fitness (α=.05). Results: There was a significant difference in the machining precision and the marginal and internal fit according to the type of ceramic block (P<.001). In addition, the machining precision and the marginal and internal fit were positively correlated (P<.001). Conclusion: The marginal fit of crowns fabricated according to the types of ceramic blocks was within the clinically acceptable range (< 120 ㎛), so it can be regarded as appropriate machining precision applicable to all clinical as aspects in terms of the marginal fit.

• Journal of Navigation and Port Research
• /
• v.42 no.4
• /
• pp.245-252
• /
• 2018

A method of transmitting an alert signal in case of man-overboard (MOB) systems in a small fishing vessel navigating within coastal area is being operated as VHF-DSC equipment via a distress alert button and V-P ass Equipment via alert button or beacon separation. However, a small fishing vessel with a couple of crews on board is an inappropriate way to alert a man-overboard condition. However, internationally, MOB equipment using VHF-DSC, AIS, and Bluetooth technologies is used to transmit alert signals directly to the mother ship and other radio stations. In order to analyze the performance and technology of the MOB equipment operating in foreign countries, it was confirmed that the alarm signal can be received within a maximum of one nautical mile when the MOB device is on the water surface. An MOB device that meets domestic conditions needs to send an alarm signal to a station within the VHF communication range. However, in order to reduce the false alert signal, it is most appropriate to operate the VHF-DSC radio equipment installed on the ship remotely. Analysis of various technologies connecting the MOB and the VHF-DSC revealed that the Bluetooth system has advantages such as device miniaturization. When an emergency signal is transmitted from the MOB device, it can be received by a dedicated receiver and recognized through an external input terminal of the VHF-DSC equipment generating its own alarm. If the emergency situation cannot be processed at the mother ship, a distress alert is sent to all radio stations via VHF-DSC for response under emergencies faced by small fishing vessels.

• Journal of the Korean Geographical Society
• /
• v.40 no.2 s.107
• /
• pp.221-241
• /
• 2005

Land Use and Land Cover Changes (LUCC) occur over a wide range of space and time scales, and involve complex natural, socio-economic, and institutional processes. Therefore, modelling and predicting LUCC demands an understanding of how various measured properties behave when considered at different scales. Understanding spatial and temporal variability of driving forces and constraints on LUCC is central to understanding the scaling issues. This paper aims to 1) assess the heterogeneity of land cover change processes over the landscape in northern Ghana, where intensification of agricultural activities has been the dominant land cover change process during the past 15 years, 2) characterise dominant land cover change mechanisms for various spatial scales, and 3) identify the optimal spatial scale for LUCC modelling in a savanna landscape. A multivariate statistical method was first applied to identify land cover change intensity (LCCI), using four time-sequenced NDVI images derived from LANDSAT scenes. Three proxy land use change predictors: distance from roads, distance from surface water bodies, and a terrain characterisation index, were regressed against the LCCI using a multi-scale hierarchical adaptive model to identify scale dependency and spatial heterogeneity of LUCC processes. High spatial associations between the LCCI and land use change predictors were mostly limited to moving windows smaller than 10$\times$10km. With increasing window size, LUCC processes within the window tend to be too diverse to establish clear trends, because changes in one part of the window are compensated elsewhere. This results in a reduced correlation between LCCI and land use change predictors at a coarser spatial extent. The spatial coverage of 5-l0km is incidentally equivalent to a village or community area in the study region. In order to reduce spatial variability of land use change processes for regional or national level LUCC modelling, we suggest that the village level is the optimal spatial investigation unit in this savanna landscape.