• Journal of Korea Water Resources Association
• /
• v.43 no.1
• /
• pp.105-117
• /
• 2010

This paper presents a new and simple technique to perform MUSCL reconstruction for solving 2D shallow water equations. The modified MUSCL scheme uses weighted area ratio to apply non-uniform grid in stead of the previous method that equally distributed the difference of conservation variables to each interface. The suggested method can physically reconstruct conservation variables in case of uniform grid as well as non-uniform grid. In this study, Unsplit scheme applicable to unstructured grid is used and efficient slope limiter of TVD scheme is used to control numerical oscillation which can be occurred in modified MUSCL scheme. For accurate and efficient treatment of bed slope term, the modified MUSCL scheme is coupled with the surface gradient method. The finite volume model applied to suggested scheme is verified through a comparison between numerical solution and laboratory measurements data such as the simulations of isolated building test case and Bellos's dam break test case.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.165-165
• /
• 2009

현재 반도체나 이동통신 분야는 사용자의 요구에 따라 PCB의 회로선폭이 갈수록 좁아지고 있다. 이러한 정밀 부품을 제조하기 위한 제조공정에서 각광받기 시작한 기술 중 하나가 대기압 플라즈마 기술이다. 본 연구에서는 미세패턴 형성이 가능한 에폭시 본딩 필름위에 무전해 도금공정을 통한 패턴 도금법을 이용하여 패턴을 형성하였고, 형성된 패턴에 대기압 플라즈마 처리 횟수에 따른 접촉각(Contact Angle)과 Peel Strength의 변화를 분석하였다. 또한 에폭시 본딩 필름을 이용한 Build-up공정을 거쳐 Micro Via를 형성하여 대기압 플라즈마 처리 횟수에 따른 Via 표면을 분석하였다. 대기압 플라즈마 기술은 진공식에 비해 소규모 장비를 이용한 전처리가 가능하고, 초기 설비비용을 절감하는데 탁월한 효과가 있어 널리 사용하는 기술 중 하나이다. 이 연구를 통하여 대기압 플라즈마 처리 횟수에 따른 표면에너지의 변화로 인한 접촉각이 좋아지는 것을 알 수 있으며, 대기압 플라즈마 처리를 한 패턴표면이 친수성으로 변하면서 현상된 드라이 필름 사이로 도금액이 원활히 공급되어서 미세패턴 모양이 우수하게 구현되었음을 알 수 있었다. 또한 Via Filling에도 뛰어난 효과가 있었음을 확인할 수 있었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.141-149
• /
• 1993

The gravimetric geoid of the South Korea Region was computed on Geodetic Reference System 1980(GRS80) using a combination of satellite-derived potential coefficients and terrestrial gravaty data. $10^{\prime}{\times}10^{\prime}$ mean gravity anomalies were obtained from surface gravity data for the outer zones, $1^{\circ}{\times}1^{\circ}$ equal area mean anomalies were used for the inner zones, and point gravity anomalies were used for the innermost zones in the Stokes integration. The GRS80 potential coefficients were obtained from modification of GEM9 data and Integration was extended over a spherical cap of $30^{\circ}$ from the integration area. The results of a free-air geoid show that the systematic mean difference of approximately 2~3m in comparison of OSU89B model.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.8
• /
• pp.701-707
• /
• 2014

The ecofriendly yellow ocher is used in the manufacturing of cosmetics, construction, and food packaging. The polyethylene terephthalate (PET) used for manufacturing food containers has a microporous structure that causes aeration. Hydrophilic yellow ocher may be applied to hydrophobic PET by surface modification to overcome this issue. The aim of this study is to fabricate a yellow ocher polystyrene hybrid structure in the form of nanoparticles using an optimizing molar ratio of styrene, divinylbenzene, and potassium peroxodisulfate for use in emulsion polymerization. The polymerization was conducted in a yellow ocher suspension that was prepared by dispersing mechanically ground yellow ocher in DI water. The prepared hybrid structure was measured using scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. The measurement revealed the spherical morphology and Si component that resulted from the yellow ocher in the polystyrene particles. We expect that this hybrid structure would be used as platform material to minimize aeration in PET.

• Molecules and Cells
• /
• v.25 no.1
• /
• pp.78-85
• /
• 2008

In a search for new molecular pathways associated with asthma, we performed an mRNA differential display analysis using total RNA extracted from the tracheal tissues of ovalbumin (OVA)-challenged mice and sham controls. cDNAs corresponding to mRNAs for which expression levels were altered by OVA-challenge were isolate and sequenced. Twenty-eight genes differentially expressed in sham and OVA challenged mice were identified. A GenBank BLAST homology search revealed that they were related to cytoskeleton remodeling, transcription, protein synthesis and modification, energy production, and cell growth and differentiation. Two were selected for further characterization. Up-regulation of both the perinatal skeletal myosin heavy chain (skMHC) and fast skeletal muscle myosin light chain (skMLC) genes was confirmed by RT-PCR of trachea tissue from OVA challenged mice. Overexpression of skMLC protein was observed in the smooth muscle layers of OVA-challenged mice by immunohistochemistry, and the surface areas stained with skMLC antibody increased in the OVA-challenged mice. The overexpression of skMLC in murine asthma may be associated with the changes of bronchial smooth muscle.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.91-98
• /
• 2016

Linerboards have been produced by recycling recovered paper such as old corrugated containers(OCC). Usually linerboards produced during summer season show weak strength compared with those of produced during winter. In order to cope with the weak strength of linerboards produced during summer, and to confirm uniform quality, it is important to understand the seasonal effect on strength properties. Effect of pulping temperature of the OCC for linearboard production was investigated by controlling pulping temperatures at $18^{\circ}C$ and $51^{\circ}C$. Low pulping temperature ($18^{\circ}C$) caused more generation of fines in stock. Consequently retention and drainage of linerboard defibrated at high pulping temperature ($51^{\circ}C$) were better than those of $18^{\circ}C$. Strength properties of handsheet at low pulping temperature were higher than those of high pulping temperature and it could be confirmed that low pulping temperature during winter is one reason of seasonal variation of recycled linerboard strength. It is considered that surface modification of OCC fibers by harsh pulping action during winter caused increase of paper strength.

• Membrane Journal
• /
• v.26 no.6
• /
• pp.458-462
• /
• 2016

Saline water electrolysis, known as chlor-alkali (CA) membrane process, is an electrochemical process to generate valued chemicals such as chlorine, hydrogen and sodium hydroxide with high purities higher than 99%, using an electrolytic cell composed of cation exchange membrane, anode and cathode. It is necessary to reduce energy consumption per a unit chemical production. This issue can be solved by decreasing intrinsic resistance of the membrane and the electrodes and/or by reducing their interfacial resistance. In this study, the electron radiation grafting of a $Na^+$ ion-selective polymer was conducted onto a hydrocarbon sulfonated ionomer membrane with high chemical resistance. This approach was effective in improving electrochemical efficiency via the synergistic effect of relatively fast $Na^+$ ion conduction and reduced interfacial resistance.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.183-194
• /
• 2002

Biotite and its weathering Products in the weathering Profile of Andong granite were examined using X-ray diffraction, chemical analysis, and electron microscopy. Major weathering product of biotite was oxidized biotite, which is decomposed into kaolinite in the upper part. Discrete vermiculite or hydrobiotite was not detected although minor vermiculite (5%) was randomly interstratified with oxidized biotite. Excess positive charge induced by iron oxidation was balanced by release of Fe (16%) and Mg (12%) from octahedral site and K (13%) from interlayer site. After slight chemical and structural modification induced by iron oxidation, oxidized biotite persists through the weathering profiles with partial decomposition in the upper part of the profile. Formation environments and dissolution experiments of oxidized biotite highly resistant to weathering are required to understand the elemental behavior in the surface environments on the biotite-bearing bedrocks.

• Journal of Environmental Science International
• /
• v.1 no.2
• /
• pp.105.2-117
• /
• 1992

The formation mechanism of the vortex streets in the lee of the mountain Is Investigated by a three-dimensional numerical model. The model is based upon the hydrostatic Boussinesq equations in which the vertical turbulent momentum flux is estimated by a turbulence parameterization scheme, but the horizontal viscosity is assumed to be constant. The results show that Karman vortex streets can form even without surface friction in a constant ambient flow with uniform stratification. The vortex formation is related to breaking of the mountain wave, which depends on the Froude number (Fr). In the case of a three-dimensional bell-shaped mountain, the wave breaking occurs when Fr is less than about 0.8, while a barman vortex forms when Fr is less than about 0.22. Vortex formation also depends on Reynolds number, which is estimated from the horizontal diffusivity. The vortex formation can be explained by the wave saturation theory given by Lindzen (1981) with some modification. Simulations in this study show that in the case of Karman vortex formation the momentum flux in the lower level is much larger than the saturated momentum flux, whereas it is almost equal to the saturated momentum at the upper levels as expected from the saturation theory. As a result, large flux divergence is produced in the lower layer, the mean flow is decelerated behind the mountain, and the horizontal wind shear forms between unmodified ambient wind. The momentum exchange between the mean flow and the mountain wave is produced by the turbulence within a breaking wave. From the result, well developed vortices like Karman vortex can be formed. . The results of the momentum budget calculated by the hydrostatic model are almost the same as nonhydrostatic results as long as horizontal scale of the mountain is 10 km. A well developed barman vortex similar to the hydrostatic one was simulated in the nonhydrostatic case. Therefore, we conclude that the hydrostatic assumption is adequate to investigate the origin of the Km8n vortex from the viewpoint of wave breaking.

• Journal of the Korean Society of Costume
• /
• v.62 no.2
• /
• pp.1-12
• /
• 2012

Cloths wrapped around the body have been the basis of the dress of people all over the world for centuries. This study is to research detailed modifiable fashion styling methods in history and to give ideas to people such as fashion professionals who are interested in fashion styling so that they can create modifiable fashion styling easily in fashion fields. The characteristics of modifiable fashion styling methods from ancient to middle ages are as follows. The first modifiable styling method is to expose the knots on the surface of the garments, and the knots were mainly located on the upper part of the body. The second method is a wrapping type of the modifiable styling method, which shows a lot of variant simple shapes of cloths. This method helped develop many wrapping methods over time. The third way is the fixed type of the modifiable styling method, and it uses accessories such as fibulae, belts to fix cloths, to create many different styles. The accessories are located on around either the neck or waist. The fourth method is the composite type of the modifiable styling methods mentioned above. This styling method is adapted in robe type clothes which makes the clothes look full of beautiful drapery. This study suggests that simple shapes of cloths can create enormous amount of styling which can be easily adapted and created nowadays.