• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.29-34
• /
• 2000

This paper describes a numerical study to make clear the characteristics of flow around a high speed catamaran hull advancing on calm water. The simulation is carried out at Froude number of 0.5 with a separation to length rations of 0.2 to 0.5. To simulate the flows, the Navier-Stokes solver is employed in which the free surface condition is included. Computations are performed in a rectangular grid system based grid system based on the Marker & Cell method. For the validation, the computation results are compared with the experiments.

• 한국주조공학회지
• /
• 제13권5호
• /
• pp.424-431
• /
• 1993

A Numerical technique has been developed for the coupled heat transfer and fluid flow calculation during the casting process. In this method the SMAC technique was coupled with the concept of Volume of Fluid(VOF) to calculate melt free surface and velocity profiles within the melt, and the Energy Marker method coupled with the finite difference method was proposed for the convective and conductive heat transfer analysis in the casting. When comparing numerical calculations with experimental observations, a close correlation was evident. It has been shown that this technique is useful for proper gating and casting design, especially for thin-walled castings.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제7권6호
• /
• pp.897-906
• /
• 2017

프로젝션 맵핑(공간증강현실)은 현실세계에서 다양한 가상의 환영(幻影)을 만들어내는 것으로 최근에 많은 분야에 사용되고 있다. 기존의 프로젝션 맵핑에서는 사용자와의 자연스러운 상호작용으로서 접히거나 구부러지는 것 과 같은 유연한 물체의 기하학적인 변형 속성(예: 용지)의 움직임을 고려하지 않았다. 또한, 정적 물체에 대한 프로젝션 맵핑에 대한 많은 연구가 있었지만, 유연한 타깃의 움직임을 추적하고 사용자와의 상호작용 측면에서 모양이 변형된 물체에 맵핑을 정확히 하는 다이내믹 프로젝션 맵핑은 여전히 도전해야할 연구 분야이다. 따라서 본 논문에서는 Unity3D와 ARToolkit을 이용한 실험을 통해 단단하지 않은 물체에 대한 견실한 추적과 정확한 맵핑 방법을 제안한다. 제안하는 방법은 큐빅 베지어 곡면 형성, 움직임 변형 값 렌더링 과정, 멀티플 마커 인식과 트래킹 과정, 실시간 웹캠 지속 촬영의 4가지 실험 단계로 구성된다. 사용자는 물체에 변형을 주기 위해 직접 접고, 휘고, 구부리고 비틀 수 있다. 제안 방법은 세 가지 긍정적인 결과를 도출할 수 있다. 첫째, 물체의 형태가 강하게 변형되어 있어도 감지 가능하다. 둘째, 사용자가 직접 물체에 변형을 주는 과정에서 물체의 일부분을 차단하고 있을 때의 Occlusion오류를 줄일 수 있어 정확한 트래킹을 할 수 있다. 셋째, 제안 방법의 견실하고 정확함은 빠른 속도로 물체의 움직임을 감지하게 하므로 실시간으로 결과 값을 물체에 투영할 수 있다.

• 대한조선학회논문집
• /
• 제47권5호
• /
• pp.671-679
• /
• 2010

This paper introduces a new hull form design method for the bow of a full ship, by actively applying the relation between the fore-body hull form and its wave resistance characteristics. For the hull form design, the Series 60($C_B=0.8$) hull is chosen as the parent ship, and Kracht's charts are used to determine the parameters of the bulbous bow in the early stages of hull form design. Several hull forms have been tested in order to obtain enough hull form variations with various bow shapes and design parameters in the search of the best design. In order to investigate the resistance characteristics of the designed hull forms, numerical simulations with corresponding model tests have been rigorously performed. For the numerical simulations, the Marker-density method is employed to track the nonlinear phenomena of the free surface(program IUBW). Model tests have also been performed to achieve an improved research performance using the designed hulls. Both numerical and experimental results show that the wave resistance of the hull forms can be effectively diminished if the bows are designed using the method introduced in this research. It is also expected that this research can facilitate better productivity in hull form design, especially at the preliminary design stage of a full ship type vessel.

• 분석과학
• /
• 제32권2호
• /
• pp.48-55
• /
• 2019

The simple and effective analytical method for the quality control of a novel scalp tonic formulation has been developed and optimized in terms of HPLC conditions and sample preparation method, meanwhile, the optimization of preparation condition was using response surface methodology (RSM) based on central composite design (CCD). Oleanolic acid was selected as marker compound because of its bioactivities for alopecia therapy. The developed analytical method and extraction condition were successfully qualified. Coefficient of determination ($r^2$) for the calibration was 0.9997 with a line passing through the origin point in the range of 0.1-100 mg/mL. The limit of detection (LOD) and the limit of quantitation (LOQ) were 17.5 ng/mL and 55.0 ng/mL, respectively. The intra-day and inter-day precision of the method were 0.5-1.4 % and 0.7-1.8 % in relative standard deviation, respectively, while those accuracy were 99.5-100.9 % and 100.0-102.2 %, respectively. The repeatability of oleanolic acid in samples ranged of 0.3-1.9 % based on peak area and 0.3-0.7 % for retention time. Recoveries from samples were 95.0-99.4 % with lower than 1.8 % in relative standard deviation. Overall, the developed analytical method will be used for quality control of this commercial scalp tonic products successfully.

• Journal of Ship and Ocean Technology
• /
• 제5권2호
• /
• pp.50-61
• /
• 2001

In this paper, nonlinear interactions between water waves and a horizontally submerged circular cylinder are numerically simulated. In this case, the nonlinear interactions between them generated a wave breaking phenomenon. The wave breaking phenomenon plays an important role in the wave farce. Negative drifting forces are raised at shallow submerged cylinders under waves because of the wave breaking phenomenon. For the numerical simulation, a finite difference method based on the unsteady incompressible Navier-Stokes equations and the continuity equation is adopted in the rectangular grid system. The free surface is simulated with a computational simulation method of two-layer flow by using marker density. The results are compared with some existing computational and experimental results.

• 한국주조공학회지
• /
• 제12권1호
• /
• pp.40-50
• /
• 1992

A computer simulation of mold filling has been performed in order to analyze the fluid flow pattern in a mold cavity since casting defects such as cold shut formation, entrapment of air or gas, and inclusions are closely related to the fluid flow phenomena. The flow of molten metal entering the mold cavity with free surface has been modeled by SMAC(Simplified Marker and Cell) method. Two dimensional analysis was carried out on plate shape castings with two types of gate system. The calculation results were compared with those of water modeling experiments and showed relatively good agreement.

• Nuclear Engineering and Technology
• /
• 제43권2호
• /
• pp.133-140
• /
• 2011

In this paper, a deformation measurement technology for nuclear fuel rods is proposed. The deformation measurement system includes a high-definition CMOS image sensor, a lens, a semiconductor laser line beam marker, and optical and mechanical accessories. The basic idea of the proposed deformation measurement system is to illuminate the outer surface of a fuel rod with a collimated laser line beam at an angle of 45 degrees or higher. For this method, it is assumed that a nuclear fuel rod and the optical axis of the image sensor for observing the rod are vertically composed. The relative motion of the fuel rod in the horizontal direction causes the illuminated laser line beam to move vertically along the surface of the fuel rod. The resulting change of the laser line beam position on the surface of the fuel rod is imaged as a parabolic beam in the high-definition CMOS image sensor. An ellipse model is then extracted from the parabolic beam pattern. The center coordinates of the ellipse model are taken as the feature of the deformed fuel rod. The vertical offset of the feature point of the nuclear fuel rod is derived based on the displacement of the offset in the horizontal direction. Based on the experimental results for a nuclear fuel rod sample with a formation of surface crud, an inspection resolution of 50 ${\mu}m$ is achieved using the proposed method. In terms of the degree of precision, this inspection resolution is an improvement of more than 300% from a 150 ${\mu}m$ resolution, which is the conventional measurement criteria required for the deformation of neutron irradiated fuel rods.

• 한국식품영양과학회지
• /
• 제45권8호
• /
• pp.1162-1169
• /
• 2016

본 연구에서는 기능성 홍삼 엑기스 제조를 위해 추출용매, 압력, 온도, 추출시간을 조절하여 가속 용매 추출한 후 기능성 홍삼제품의 지표성분인 진세노사이드 함량, 총페놀화합물 및 벤조피렌 함량 등을 조사하였다. 홍삼 가속 용매 추출 최적화를 위한 독립변수 선택을 위해 에탄올 농도, 압력, 온도 및 추출시간에 따른 기능성 홍삼제품의 지표성분인 진세노사이드 Rb1, Rg1 및 Rg3(20S) 함량의 합을 분석하여 진세노사이드 추출에 가장 최적의 용매를 50% 에탄올로 하고, 영향이 다소 작았던 요인인 압력을 2,500 psi로 설정하였으며, 온도와 추출시간을 독립변수로 설정하였다. 추출 온도 및 시간을 독립변수로 하여 고온고압 처리한 홍삼의 진세노사이드 Rb1, Rg1 및 Rg3(20S) 함량의 합, 총 페놀성 화합물 및 벤조피렌 함량을 측정한 결과, 벤조피렌이 검출되지 않는 조건에서 진세노사이드 Rb1, Rg1 및 Rg3(20S)의 함량 합이 최적화된 조건은 $158^{\circ}C$, 20분임을 확인할 수 있었다. 최적화된 조건에서의 가속 용매 추출 시 초음파 및 환류냉각 추출에 비해 적은 용매로 단시간 추출하면서 진세노사이드 Rb1, Rg1 및 Rg3(20S) 함량 합 및 총폴리페놀 함량이 각각 1.5~2배 및 2.2~5배 높게 추출할 수 있어 효율적인 추출방법이 될 것으로 생각된다.

• 대한조선학회논문집
• /
• 제54권6호
• /
• pp.492-500
• /
• 2017

In the study, numerical simulation on the greenwater impact load of free surface offshore structure in the regular waves using fixed cartesian grid system and Modified Marker-Density (MMD) method were carried out and the results were reviewed. In order to compare numerical simulation and experimental results, the FPSO with the scale ratio of 1/100 model ship with fixed rectangular deck was selected and turbulence characteristic of the flow was considered by applying the Sub-Grid Scale (SGS) in laminar flow. As a result, it is reviewed how the greenwater impact load inflowed from bow in regular headsea wave influence the flow on the deck and the flow characteristic by numerical simulation and the experiment results were compared and reviewed. Based on this study, it would be useful to numerically study the effect of greenwater on offshore structure.