반발경도법과 복합법에 의한 현장비파괴 시험과 코어강도의 평가는 노후화된 구조물의 상태평가를 위하여 가장 효과적인 방법이다. 그러나 비파괴 시험방법의 불확실성과 함께 재료의 재령, 탄산화와 코어채취시의 물리적 손상 등에 의하여 현장강도 추정시의 정밀도를 낮추는 요인으로 작용하게 된다. 본 연구에서는 106개 교량에서 수집된 268개의 비파괴시험결과와 코어압축강도 결과를 사용하여 현장 압축강도 추정방법을 제시하고자 하였다. 코어강도의 신뢰도를 높이기 위하여 수정계수를 적용하고자 하였으며, 노후콘크리트의 반발경도에 영향을 미치는 탄산화 또는 재령에 의한 수정계수를 적용하여 현장 강도 추정결과의 신뢰도를 높이고자 하였다. KISTEC의 제안 추정식과 수정계수를 적용한 경우 기존의 추정방법과 비교하여 신뢰도가 높아지는 것으로 나타났다.
Cold forging, carried out at room temperature, leads to high dimensional accuracy and excellent surface integrity as compared to other forging methods such as warm and hot forgings. In the cold forging process, WC-Co (Tungsten Carbide-Cobalt) alloy is the mainly used material as a core dies because of its superior hardness and strength as compared to other structural materials. For cold forging, die life is the most significant factor because it is directly related to the manufacturing cost due to periodic die replacement in mass production. To investigate die life of WC-Co alloy for cold forging, mechanical properties such as strength and fatigue are essentially necessary. Generally, uniaxial tensile test and fatigue test are the most efficient and simplest testing method. However, uniaxial tension is not efficiently application to WC-Co alloy because of its sensitivity to alignment of the specimen due to its brittleness and difficulty in thread machining. In this study, shape of specimen, tools, and testing methods, which are appropriate for uniaxial tensile test for WC-Co alloy, are proposed. The test results such as Young's modulus, tensile strength and stress-strain curves are compared to those in previous literature to validate the proposed testing methods. Based on the validation of test results it was concluded that the newly developed testing method is applicable to other cemented carbides like Titanium carbides with high strength and brittleness, and also can be utilized to carry out fatigue tests for further investigation on die life of cold forging.
벼 재배시 하해혼성층 논토양의 전북통과 지산통 작토층과 경반층의 특성을 2년간(2005~2006)조사 분석한 결과를 요약하면 다음과 같다. 하해혼성층적층 대표토양인 전북통과 곡간충적층 대표토양인 지산통을 10개소에서 조사한 결과 작토심은 전북통 12.6 cm, 지산통 12.7 cm 이었고 플라우 경운깊이는 120필지에서 조사한 결과 10.5 cm 이었으며 전북통에서 경도와 작토심과는 부의 상관을, 경도와 경반층 두께와는 정의 상관을 나타냈다. 경반층 경도는 전북통 $14.7kg\;cm^{-2}(25.3mm)$, 지산통 $8.7kg\;cm^{-2}(22.1mm)$ 이었고, 두께는 전북통 22.3 cm, 지산통 17.8 cm 이었으며 경반층 출현깊이는 전북통 15 cm, 지산통 20 cm에 있었다. 경반층 지온은 작토층과의 차이를 보면 전북통에서는 봄 $-2.0^{\circ}C$, 여름 $-2.5^{\circ}C$, 가을 $-1.0^{\circ}C$를 지산통은 봄 $-2.1^{\circ}C$, 여름 $-1.8^{\circ}C$, 가을 $-0.7^{\circ}C$를 나타냈고 전북통에서 산화환원전위차 변화는 작토층은 유수형성기부터 환원상태를 경반층은 출수후기까지 산화상태를 나타냈다. 토양물리성은 두 토양통 공히 경반층에서 용적밀도, 고상율이 높고 공극율, 기상율이 낮았다. 또한 토양화학성은 경반층에서 총질소가 낮았고, 유기물 및 유효 인산함량이 적은 반면에 pH가 높고, 유효규산, 치환성칼슘 및 마그네슘 함량이 많았다. 양이온치환용량은 전북통에서 작토층 및 경반층 비슷한 경향이었으나 지산통은 경반층에서 다소 낮은 경향을 나타냈다. 무기태질소 함량은 토양통 공히 작토층에서 많았고, 가용성 미량성분 함량은 경반층에서 많았으며 지산통에서 많은 경향을 나타냈다. 감수심은 전북통에서 심경구, 지산통 경운구는 로타리구보다 빠르고, 계절별 감수심 변화는 6월 하순까지는 감수심이 빨랐으나 7~8월에는 1~3 mm로 늦었으며 9월부터는 빠른 경향을 나타냈다. 벼 뿌리분포는 로타리 25 cm, 심경 30 cm, 경운 20 cm까지 신장하였고, 출수기 뿌리 건물중은 심경>로타리>경운 순으로 무거웠다.
Top-Emitting OLED (Organic Light-Emitting Diode) 디스플레이에서는 반사율이 가장 높은 Ag (silver) 박막이 쓰이고 있지만, 소자에서 요구되는 일함수(work function)가 상대적으로 낮기 때문에 전극과 유기물간에 에너지 장벽이 발생하여 발광효율을 낮추는 요인이 되고 있다. 본 논문에서는 Ag 전극의 일함수를 높이기 위한 연구를 진행하였으며, 박막 형태의 Ag 전극에 대하여 nanotribology 접근법으로 연구를 실행하였다. Ag는 rf magnetron sputter를 이용해 glass 위에 증착한 후 furnace에서 $300^{\circ}C$, 30분간 대기 중에서 열처리하였고, 또 다른 시료는 표면에 산소 상압플라즈마로 처리 시간(30, 60, 90, 120s)을 각기 다르게 하여 시료를 제조하였다. Ag 전극을 nanoindentation을 통해 국부 영역에 대한 물리적 특성의 변화를 측정하였고, Kelvin probe force microscopy을 이용해 시료 표면의 포텐셜을 측정했다. 그 결과 열처리한 시료의 포텐셜값은 가장 크게 증가하였지만 균일도가 낮아졌다. 120s 플라즈마 처리한 시료는 불완전한 산화막의 생성으로 인해 탄성계수 및 경도값과 박막의 Weibull modulus를 극히 낮게 만들었지만, 60s, 90s 플라즈마 처리는 시료의 균일도를 높이고 또한 포텐셜을 증가시켜 T-OLED 성능 개선에 좋은 영향을 미치게 될 것이다.
Cr-Si-Al-N coating with different Si content were deposited by hybrid physical vapor deposition (PVD) method consisting of unbalanced magnetron (UBM) sputtering and arc ion plating (AIP). The deposition temperature was $300^{\circ}C$, and the gas ratio of $Ar/N_2$ were 9:1. The CrSi alloy and aluminum targets used for arc ion plating and sputtering process, respectively. Si content of the CrSi alloy targets were varied with 1 at%, 5 at%, and 10 at%. The phase analysis, composition and microstructural analysis performed using x-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) including energy dispersive spectroscopy (EDS), respectively. All of the coatings grown with textured CrN phase (200) plane. The thickness of the Cr-Si-Al-N films were measured about $2{\mu}m$. The friction coefficient and removal rate of films were measured by a ball-on-disk test under 20N load. The friction coefficient of all samples were 0.6 ~ 0.8. Among all of the samples, the removal rate of CrSiAlN (10 at% Si) film shows the lowest values, $4.827{\times}10^{-12}mm^3/Nm$. As increasing of Si contents of the CrSiAlN coatings, the hardness and elastic modulus of CrSiAlN coatings were increased. The morphology and composition of wear track of the films was examined by scanning electron microscopy (SEM) and energy dispersive spectroscopy, respectively. The surface energy of the films were obtained by measuring of contact angle of water drop. Among all of the samples, the CrSiAlN (10 at% Si) films shows the highest value of the surface energy, 41 N/m.
Statement of problem: In order to increase preload with reducing the friction coefficient, abutment screws coated with pure gold and Teflon as dry lubricant coatings have been introduced. But the reported data indicate that if screw repeated tightening and loosening cycle, an efficiency of increasing preload was decreased by screw surface wearing off. Purpose: This study was to evaluate the influence of tungsten carbide/carbon coating, which has superior hardness and frictional wear resistance, on the preload of abutment screws and the stability of coating surface after repeated closures. Material and method: The rotational values of abutment screws and the compressive forces between abutment and fixture were measured in implant systems with three different joint connections, one external butt joint and two internal cones. Moreover the stability and the alteration of coating surface were examined by comparison of the compressive force and the removable torque values during 10 consecutive trials, observation with scanning electron microscope and analyzed the elemental composition with energy dispersive x-ray spectroscopy Results and conclusion: 1. Application of coating resulted in significant increase of compressive force in all implant systems(P<.05). The increasing rate of compressive force by coating in external butt joint was gloater than those in internal cones (P<.05). 2. Coated screw showed the significant additional rotation compared to non-coated screw in all implant systems (P<.05). There were no significant differences in the increasing rate of rotation among implant systems (P>.05). 3. Removable torque values were greater with non-coated screw than that with coated screw (P<.05). 4. Coated screw showed insignificant variations in the compressive forces during 10 consecutive trials(P>.05) 5. After repeated trials, the surface layer of coated screw was maintained relatively well. However surface wearing and irregular titanium fragments were found in non-coated screw.
The use of pure titanium and titanium alloys have been increased recently in fixed, removable prosthodontics and implant fields as a framework. But when they were used for superstructures of implant or metal framework of removable prosthesis, welding is necessary to reconnect the fracture site to control the casting distortions. To overcome the difficulties in soldering the titanium due to high oxidation property, much effort have been devoted. In this study, some of mechanical properties were compared between pure titanium and Ti-6Al-4V alloy by using after welding, electron beam welding technique and tungsten arc welding. Mechanical properties such as tensile strength, yield strength, elongation and microhardness were measured. And, in order to compare the effect of welding site and surrounding metal tissue according to the welding condition, SEM photographs were taken and element distribution was observed by Wave Dispersion Spectroscopy. Through analyses of the data, following results were obtained; 1. In items such as tensile strength, yield strength and elongation according to the welding techniques of pure titanium, only tungsten arc welded group showed significant lower value than other groups(P<0.05). 2. In items such as tensile strength and yield strength according to the welding techniques of Ti-6Al-4V alloy, control group and tungsten arc welded group showed significant difference among all the groups(P<0.05). 3. Ti-6Al-4V alloy exhibited significantly greater elongation than control group when the laser welding method and electron beam welding method were used, and elongation showed increasing tendency. 4. Pure titanium specimens exhibited increasing tendency of microhardness regardless of the weld-ing technique applied, and especially tungsten arc welded group demonstrated a great increase of microhardness than parent metal. 5. There was no hardness change in laser welded group and electron beam welded group of Ti-6Al-4V alloy, but in tungsten arc welded group, hardness changed greatly from parent metal to weld seam. 6. Through the metallographic examination and scanning electron microscopy, laser welding caused central fusion and recristallizations were formed and tungsten arc welding caused localized fusion to 0.3-0.7mm from the surface.
식물성지방산 고형비누는 검화법 제조 후 수분증발 및 경도를 위한 건조과정이 필요하며, 주로 천연성분의 첨가물을 혼합하여 제조하고 있으나 그동안의 연구는 식물성고형비누의 사용성에 관한 연구가 대부분으로 천연성분이 혼합된 식물성 지방산 고형비누의 물리적 특성과 관련된 연구는 미비한 상태이다. 이에 본 연구는 고형비누가 건조되는 기간과 첨가물(tea tree E.O, $TiO_2$)에 따른 비누의 물성 변화(pH, 표면장력, 임계미셀농도, 세정력)를 pH paper, Du Nouy 측정법, 침전법과 초음파 세척기를 이용하여 비교 관찰하고자 하였다. 식물성지방산 고형비누는 첨가물의 혼합여부와 상관없이 pH가 동일하게 나타났으며, 건조 2주~12주까지 pH8로 변화가 없었다. 또한, 표면장력과 CMC 측정결과 $TiO_2$가 첨가된 비누만 건조기간과 상관없이 62.5mg/L로 일정한 값을 보였으며, 다른 비누시료는 건조 4주째만 CMC가 25mg/L로 낮아졌다. 세정력 측정 결과 4주간 건조한 Tea tree E.O, $TiO_2$를 혼합한 식물성지방산 고형비누의 제거효율은 4.50~4.65%로 첨가물이 없는 식물성지방산 고형비누의 제거효율 3.62~3.92%보다 세정력이 높게 나타났다.
Purpose: The use of appropriate instruments to clean surfaces with minimal change, is critical for the successful maintenance of a dental implant. However, there is no consensus about the type and methodology for such instruments. The aim of this study was to characterize changes in the roughness of titanium surfaces treated by various scaling instruments. Methods: Thirty-seven identical disks (5 mm in diameter) were investigated in this study. The specimens were divided into eight groups according to the types of instrumentation and the angle of application. Ultrasonic scaling systems were applied on a titanium disk to simulate standard clinical conditions. The equipment included a piezoelectric ultrasonic scaler with a newly developed metallic tip (NS group), a piezoelectric ultrasonic scaler with a conventional tip (CS group), a piezoelectric root planer ultrasonic scaler with a conventional tip (PR group), and a plastic hand curette (PH group). In addition, the sites treated using piezoelectric ultrasonic scaler systems were divided two sub-groups: 15 and 45 degrees. The treated titanium surfaces were observed by scanning electron microscopy (SEM), and the average surface roughness (Ra) and mean roughness profile depth (Rz) were measured with a profilometer. Results: SEM no significant changes in the titanium surfaces in the NS group, regardless of the angle of application. The PH group also showed no marked changes to the titanium surface, although some smoothening was observed. All CS and PR sites lost their original texture and showed irregular surfaces in SEM analysis. The profilometer analysis demonstrated that the roughness values (Ra and Rz) of the titanium surfaces increased in all, except the PH and NS groups, which showed roughness decreases relative to the untreated control group. The Ra value differed significantly between the NS and PR groups (P<0.05). Conclusions: The results of this study indicated that changes in or damage to titanium surfaces might be more affected by the hardness of the scaler tip than by the application method. Within the limitations of this study, the newly developed metallic scaler tip might be especially suitable for peri-implant surface decontamination, due to its limited effects on the titanium surface.
This study was conducted to develop food for the elderly, which are well-shaped and easy to chew and swallow. The amounts of water and gelatin were adjusted to facilitate breaking down of the food with the tongue. In the aging society, it is necessary to support the development of a variety of products that can ease the intake functions of swallowing and chewing, while complementing with the essential nutrients supplements; such products can be actively commercialized in the elderly industry. Various types of food, for elderly with difficulties in chewing and swallowing, were used for sensory assessment. Sensory panel consisted of 10 dietitians (10 women) in nursing care facilities. The sensory optimal composite recipes were determined by central composite design (CCD). The sensory measurements were significantly different in the appearance (p<0.01), saltiness (p<0.01) and overall quality (p<0.01). The optimum formulation of pan fried flat fish, calculated by numerical and graphical method, was 8.54 g of salt and 6.34 g of olive oil. Moisture content, hardness, and adhesiveness of pan fried flat fish were 84.77%, 250, and -1.20, respectively. The result showed that easily chewable and swallowable pan fried flat fish for the elderly will have sufficient competitiveness, considering its safety, taste, and preference. This study may provide the basic materials for the development of easily chewable and swallowable foods for elderly.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.