• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.801-808
• /
• 2014

Ion diffusion and chemical binding to acrylic polymer were investigated in a solid film. The composition of acrylic monomers containing amino group and carboxylic acid was adjusted for rapid ion migration in the film. p-Methylred (PMR) and phenolphthalein derivatives were optically sensitive to the concentration of proton and hydroxyl anion, respectively and verified the ion migration through the film layers. A rapid proton migration was observed in the film of a high amino content. On the other hand, $OH^-$ migration occurred rapidly in a high content of carboxylic acid group. The proton migration occurred through the internal layer as well as surface layer of a film and was reversible during 50 repetition examination. Copper(II) ion migration was examined with a Rhodamine-containing polymer film. The light absorption and emission spectra of a Rhodamine-Cu complex showed the key contribution of carboxylic acid group to the Cu(II) migration in a film.

• Journal of Life Science
• /
• v.16 no.7 s.80
• /
• pp.1141-1147
• /
• 2006

This study was carried out to establish a reproducible culture system for callus formation and adventitious shoot development from young stem segments of Vigna radinta, and histological work for orgin of callus tissue and adventitious shoot. Induction of callus from young stem explants of Vigna radiata was very effective on MS inorganic salts supplemented with 0.5 mg/L 2,4-D and 1.0 mg/L kinetin. For the adventitious shoot regeneration from the callus tissues, the hormone combination of 0.75 mg/L NAA, 1.5 mg/L kinetin and MS salts resulted in about 21% efficiency. Histological examination showed that callus tissues originated from out-growths by callus cambium rings with do novo meristematic activities, which were localized at the outside of the vascular cambium. Adventitious shoots were developed from shoot apical meristem originated from the surface of callus masses. The shoot apical meristem produced leaf primordium, which then became leaf.

• Journal of the Korean Ceramic Society
• /
• v.53 no.5
• /
• pp.529-534
• /
• 2016

Nanocrystalline powder of zirconia stabilized with 8 mol% yttria (YSZ) has been synthesized through oxalate process using $ZrOCl_2{\cdot}8H_2O$ and $Y(NO_3)_3{\cdot}6H_2O$ as starting materials. Understanding of the characteristic changes of YSZ powder as a function of processing conditions is crucial in developing dense and porous microstructures required for fuel cell applications. In this research, microstructure change, surface area, particle shape and particle size were measured as a function of different processing conditions such as calcination temperature, stirring speed and concentration of starting materials. The resultant crystallite sizes were calculated by XRD-LB (X-Ray Diffraction Line-Broadening) method, BET method, and morphology of the crystal was observed in TEM and FE-SEM. The TEM examination showed that the powder synthesized with 0.7 M of YSZ concentration had a spherical morphology with sizes ranging from 20 to 40 nm. However, the powder was gradually aggregated above 1.0 M of YSZ concentration with the aggregation being intensified as the YSZ concentration was increased.

• Restorative Dentistry and Endodontics
• /
• v.6 no.1
• /
• pp.51-62
• /
• 1980

A Scanning Electron Microscope study was conducted to compare the effectiveness of mechanical preparation of the root canal in conjunction with a few number of canal irrigants that have been widely used for canal treatment. The irrigants used in this study were 5% sodium hypochlorite, 3% hydrogen peroxide, 15% EDTA, and 30% hydrochloric acid. The root canals of 84 freshly extracted teeth with single or multi root were conventionally prepared with Hedstroem files. 78 canals were irrigated with normal saline solution following each instrument number and 6 canals were prepared without irrigation. After instrumentation 72 canals were flushed with various irrigants for predetermined length of time as shown on the Table 1. Additional 20 teeth were kept uninstrumented and five of them were immersed in 15% EDTA for 5 minutes, five in 5% sodium hypochlorite for 5 minutes, five in 3% hydrogen peroxide for 20 minutes, and the last five were only rinsed with saline solution. The SEM examination revealed as follows: 1. The canal wall cannot be thoroughly prepared by means of files. 2. No typical structural changes occured on instrumented dentin surface by saline solution, 3% $H_2O_2$, 5% NaOCl, within 5 minutes. 3. 5% NaOCl Solution showed excellent solvent effect to organic substances in uninstrumented canal within 5 minutes and 15% EDTA and 3% $H_2O_2$ showed unsignificant changes. 4. 15% EDTA and 30% HCl dissolved calcified debris and dentin chips that obturated the dentinal tubules and showed patent orifices. 5. 15% EDTA affected on peritubular dentin more readily and showed concavity around dentinal tubules.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.2
• /
• pp.93-98
• /
• 2008

The drug-eluting stent (DES) implantation is a widely acceptable treatment for coronary heart disease. It was reported that iron chelator had anti-proliferative effect on human vascular smooth muscle cells (HA-VSMCs). In this study, tetraphenylporphine (TPP) was selected as an iron chelator and drug for DES. MTT assay showed that TPP had antiproliferative effect on HA-VSMCs. TPP and polycaprolactone (PCL) were coated onto stainless steel plate using a spraycoating method. From the surface morphology examination of the coated plate by SEM, smooth polymer coating layer could be observed. The thickness of coating layer could be controlled by changing repeating time of coating. From in vitro release test, sustained release of TPP was observed from plate during two weeks. Thus, TPP as iron chelator can be used as drug for stent coating because of its antiproliferative effect and sustain release profile.

• Journal of Conservation Science
• /
• v.7 no.2
• /
• pp.54-59
• /
• 1998

The purpose of this study was to clarify the performance of mourning clothes from Konggi Provincial Museum, to identify the fiber of these clothes, and investigate the washing effect by wet cleaning. Shapes of mourning clothes were studied, and some ingredients of non fibrous extracted matter were analyzed by FT-IR spectroscopy to clarify the performance of mourning clothes. Microscope examination, melting test, and stain test were used for the identification of the fiber. SEM was used to confirm the effect of washing after mourning clothes washed by wet cleaning added anionic detergent, sodiumdodecylbenzenesulfonate (LAS). The performance of these clothes was mourning cloth, not mummy cloth as results of analyses to the clothes' shapes and extract ingredients. The extract ingredients were carbohydrate, alkyl alcohol, and aldehyde. They didn't have any nitrogen compounds and fatty acids. The fiber identification showed this fiber was hemp. The effect of washing was high as the surface of fiber was clean and linear after wet washing.

• Analytical Science and Technology
• /
• v.16 no.3
• /
• pp.232-239
• /
• 2003

The river sediments were collected from 4 points of Seoknam river, one point of Miho river and one point of the joining area of two rivers. For preparation of sample, three sediment samples were collected for the surface, middle and lower part of the sediment at each sampling point. The elemental concentrations were analyzed by neutron activation analysis using HANARO research reactor at Korea Atomic Energy Research Institute, and the concentrations of 30 elements were determined by the relative method using standard reference material of NIST. As a result of analysis, it was found that when the examination and prediction of contamination distribution about the site where the contamination site of river is connected to the lower river is done, the specific gravity of elements which is contained in the sediment and the speed of a current of river should be considered and also found that when the samples for concentration analysis in the river sediments are collected, for the establishment of regional representatives in samples, the range of sampling depth should be determined considering the specific gravity of elements and the speed of a current.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.549-576
• /
• 1995

Bacteria are one of the most important causative agents of the pulpal and periapical diseases. Streptococci are one of the most frequently isolated facultative anarerobic bacteria in the infected root canals. Bacterial cell wall components have a direct effect in the pathogenesis of the pulpal and periapical infections. Hyaluronidase produced by bacteria has been implicated in dissemination of the diseases. The purpose of this study was to evaluate the effect of cell wall extract of streptococci on the L929 cells using inverted microscope and the transmission electron microscopy (TEM). Hyaluronidase production of streptococcal strains were investigated to determine the correlation between the severity of cell damage and the activity of enzymes. Bacterial cell wall extracts of S. sanguis, S. mitis and S. uberis isolated from infected root canals and ATCC type strains of S. mutans (ATCC 10449) and E. faecalis (ATCC 19433) were prepared by sonication and confirmed with SDS-PAGE. Silver stain of SDS-PAGE of sonic extract was efficient at $100{\mu}g$/ml concentration of cell wall protein, while Coomasie blue stain was efficient at $100{\mu}g$/ml concentration. Inverted microscope showed that sonic extract-treated L929 cells were round and detached from the substratum while others lost their fibroblastic shapes. Transmission electron microscopic examination revealed that streptococcal extracts induced death of L929 cells. Sonic extracts of streptococci had variable effect on microstructure of L929 cells. significant chromatin condensation was observed in the nucleus of the cells. Disappearance of cell surface microvilli and nuclear fragments with dense chromatin were observed. The cell nucleus had an irregular shape and numerous large vacuoles were seen in the cytoplasm and some breaks of the cell membrane could be seen. Cell organelles were in various stages of destruction and cristae of mitochondria were disoriented or disappeared. Eighteen strains of streptococci did not produce hyaluronidase.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.74-81
• /
• 2016

Study on chlorination of ilmenite ore were carried out by using PVC(polyvinyl chloride) as the chlorinating agent in a static bed reactor for selective removal of iron. The effect of amount of PVC and reaction temperature were investigated. It was found that the removal ratio of iron increased with amount of PVC and temperature. After reaction with HCl gas generated from PVC, porous surface of the specimens were observed. As a result, HCl gas could react with iron in the central portion of ilmenite particle through these pores. Examination of data using kinetic model suggest that the selective chlorination rate is controlled by chemical reaction at the interface of particles. The activation energy for the selective chlorination of ilmenite using PVC was calculated as 20.47 kJ/mol.

• Journal of the Korean Society of Safety
• /
• v.24 no.4
• /
• pp.28-33
• /
• 2009

This study examined the mounting status of cigar lighter receptacles for vehicles and analyzed the tracking phenomenon that occurs when foreign material entered a cigar lighter receptacle to obtain data for the analysis of accident investigation. Regardless of the vehicle's output, cigar lighter receptacles are mounted in a vehicle horizontally, vertically, or at tilting or inclined angle. The tilting type cigar lighter receptacle is much easier to use but current leakage resulting from foreign materials (coffee, beverages, water, etc.) falling into the cigar lighter receptacle may cause a fire to start. This study used a vehicle battery (DC 12V) as a power supply for the tracking test and configured its circuit in the same way as that of an electrical device in a vehicle. The tracking phenomenon that occurred in the standby mode of the vehicle exhibited a fine flame and an irregular occurrence of smoke. While this tracking phenomenon was occurring, the leakage current and the reaching distance of the flame were measured to be approximately 930mA and $20{\sim}50cm$, respectively. It is thought that the resultant flame may ignite toluene, dust, cigarettes, etc. It was observed that as the tracking progressed, the internal metal socket melted and a hole was created, the surface of which was also severely carbonized. In addition, the electrical resistance of the carbonized conductive path was measured to be approximately $30{\Omega}$. It is thought that this much resistance may cause local heating when leakage current flows and could ignite any nearby flammable material.