• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.483-488
• /
• 2002

Noise has become an environmental pollution that affects most peoples' health, comfort or general well being. there are many sources of noise, but one of them clearly dominates road traffic noise. It has traditionally been associated with engine and exhaust noise of vehicles. However the emission and propagation of noise from these sources were partly reduced, while at the same time the noise emission from the tire/road interaction on a relative scale became more and more prominent Generally, Portland cement concrete(PCC) pavements have the advantage of durability and superior surface friction when compared to most dense-graded asphalt. However, It is known that PCC pavements create more noise than asphaltic surfaces due to the noise from interaction of tire and pavement surface. Therefore, recent research has shown some new concrete pavement textures to be worth further examination. So in this paper, we considered the 9 types of low noise concrete pavements to evaluate tire/pavement noise.

• 대한기계학회논문집B
• /
• 제21권7호
• /
• pp.891-899
• /
• 1997

This paper presents the results of a detailed experimental examination of fully developed asymmetric flows between annular tubes with square-ribbed surface roughness. The main emphasis of the research has been on establishing the turbulence structure, particularly in the central region of the channel where the two dissimilar wall flows interact. Measurements have included profiles of time mean velocities, turbulence intensities, turbulent shear stresses, triple velocity correlations, skewness, and flatness. The region of greatest interaction is characterized by strong diffusional transport of turbulent shear stress and kinetic energy from rough toward the smooth wall region, giving rise to an appreciable separation between the planes of zero shear stresses depending on positions of roughness on the walls.

• 한국식품조리과학회지
• /
• 제22권1호
• /
• pp.30-36
• /
• 2006

Tofu samples with added herbs (green tea, rosemary, lavender and thyme) were prepared. The yield of the herb tofus was higher than that of the control tofu. The L value of the control tofu was higher than that of the herb tofus, whereas the b values were lower. The herb tofus had generally lower pH than the control tofu. Especially, lavender tofu showed the lowest pH. Under SEM examination, the control tofu showed a rough folding surface, whereas the green tea and lavender tofus had small air cell size and smooth surface. Most textural characteristics did not show significant difference among the tofu groups. However, chewiness and hardness of the thyme tofu were the lowest. In the sensory evaluation, the herb tofus had low scores in air cell size and a beany smell, but high scores in herb smell and hardness.

• 한국정밀공학회지
• /
• 제14권12호
• /
• pp.121-126
• /
• 1997

The use of CBN tool material has been greatly increased because of the superior metal cutting performance for the machining of hardened steel. This paper presents some experimental results on the ball endmiling of harened steels. Three different hardnesses of STD11 workpieces were machined using CBN ball endimills, and the machining characteristics including cutting forces tool wear, and surface roughness of machined surface were compared. It has been found that the CBN ball endmill works better in the machining of harder workpieces. The microscopic examination explains that this unusual phenomenon is caused by the difference of microstructure of each workpieces.

• Journal of Chest Surgery
• /
• 제17권2호
• /
• pp.189-196
• /
• 1984

Although the conventional methods of cardiopulmonary bypass for open heart surgery have been employed, it has been usual method to repair of congenital heart disease in infancy using deep hypother-mia and circulatory arrest technique. In 1980, we reported total correction of congenital heart disease using surface induced hypothermia-total circulatory arrest and rewarming with limited cardiopulmonary bypass. in 1981, three patients below 10 kilogram, who had ASD and PDA, and two of VSD with pulmonary hypertension were operated on using simple deep hypothermia without cardiopulmonary bypass. During surface cooling, there were no ventricular fibrillation and arrhythmia. There were no difficulties to resuscitate the heart. Postoperative respiratory and neurologic complication were not occurred. Follow up examination for two to three years gave no evidence of cerebral damage due to circulatory arrest.

• 한국정밀공학회지
• /
• 제25권9호
• /
• pp.103-108
• /
• 2008

In-plane shear tests were performed to investigate the shear property change of FRP by plasma modification. Graphite/epoxy prepreg was used as a test material and plasma source was a microwave (2.4GHz) type. Plasma was induced by oxygen gas and its flow rate was kept $4{\sim}5$sccm with low vacuum state of $10^{-3}$ Torr. Prepreg was stacked unidirectionally ($[0^0]_8$) after plasma modification. Wettability was determined by measuring a contact angle. The results showed that the contact angle was decreased from $86^0$ to $45^0$ after plasma modification. Shear strength was also improved by ${\sim}10%$. SEM examination was made on the fracture surface and functional group produced by the plasma modification was investigated by XPS.

• 한국염색가공학회지
• /
• 제21권5호
• /
• pp.1-9
• /
• 2009

The feasibility of earthworm protease as a new cosmetic material for human hair care was investigated. The effectiveness of the earthworm protease treatment was assessed by thickness change of hairs, optical microscope examination, aminoacid analysis, surface morphology, angular resolution analysis through methylene blue staining method and tensile strength change. The protease treated hair became thinner and the soil on the surface removed in experimental groups unlike control group. Tensile strength decreased in experimental group in which the enzymes may decompose polypeptide bonds.

• 한국분말재료학회지
• /
• 제13권5호
• /
• pp.305-312
• /
• 2006

Amorphous carbon nanotubes were synthesized by a reaction of benzene, ferrocene and Na mixture in a small autoclave at temperatures as low as $400^{\circ}C$. The resulting carbon nanotubes were short and straight, but their inner hole was filled with residual products. The addition of quartz to the reacting mixture considerably promoted the formation of carbon nanotubes. A careful examination of powder structure suggested that the nanotubes in this process were mainly formed by surface diffusion of carbon atoms at the surface of solid catalytic particles, not by VLS(vapor-liquid-solid) mechanism.

• 한국표면공학회지
• /
• 제34권3호
• /
• pp.240-246
• /
• 2001

The possibility of using a glass block with the composition of sodium borosilicate as starting materials for GRIN glass was examined from the view points of the phase separation of the matrix glass, the effects of leaching and the heating conditions for a porous structure, and the change in the refractive index. Glass specimens with similar compositions were prepared in the form of porous glass using a phase-separation technique. An examination of the heating and leaching conditions and the microstructure dependence of these conditions was made.; Specimens with porous structure were obtained when the heat treatment and leaching conditions were fixed at $540^{\circ}C$ for 30hrs and in a 0.3N$ H_2$$SO_4$ solution at $100^{\circ}C$, respectively. The resultant specimens had some important features on the GRIN glass.; the depth of the gradient and the change in refractive index (Δn) were 4mm and 0.015~0.02, respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.930-933
• /
• 2000

In this report experimental ultrasonic machine system has been fabricated and experimental machining has been performed using glass as a workpiece material. As grit size increases, material removal rate(MRR) was observed to be increased at decreased applied tool pressure on the workpiece, however at the higher applied pressure above $2-4\;kg/cm^2$ for smaller grit size, the MRR was not increased. Also better surface roughness was obtained for smaller grit size. Microchipping was observed from the microscopic examination and the pattern is similar to the iso-stress field where cracking is considered to be initiated near the surface.