• Journal of the Korean institute of surface engineering
• /
• v.51 no.5
• /
• pp.303-308
• /
• 2018

Currently hydrofluoric acid (HF) based glass etch method is widely used for anti-glare (AG) surface treatment since it can effectively alleviate the specular reflection problem with relatively low processing cost. However, due to the environmental regulation and safety problem, it is essential to develop alternative technology to replace this method. For this, in this paper, we propose sand blasting based AG surface treatment method for display glass. To characterize the sand blasting process, surface roughness, haze, surface durability, and flatness are considered as process outputs and central composite design (CCD) method and response surface model (RSM) method are applied to model each process output. Models for surface roughness and haze showed 96.44% and 97.24% of R-squared values, respectively and they can be applied to optimize AG surface treatment process for various haze level requirements of display industries.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.643-646
• /
• 2005

We present new ramp-reset waveforms that realize fast addressing in AC-PDPs. These waveforms distort the distribution of wall charges on the surface of a phosphor layer: hence, the enhanced electric field helps to ignite a cell faster. They also reduce the black luminance: the divide of erasing ramp down discharges into two parts, i.e. a surface discharge and a vertical discharge, makes lower luminance.

• Journal of Information Display
• /
• v.3 no.4
• /
• pp.8-12
• /
• 2002

We have carried out a simulation study on an e-beam addressed liquid crystal projection display in which the liquid crystal is switched by the electric field of the charge, produced by an electron beam, on the surface of the display. We calculated the electric field produced by the surface charge, the liquid crystal director configuration and the profile of the transmitted light. We studied the factors affecting the resolution of the display and the effect of pretilt angle on the performance of the display. The e-beam addressed liquid crystal projection display potentially has the advantages of high resolution and high brightness.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.86-89
• /
• 2004

Organic thin film transistors (OTFTs) are fabricated on the plastic substrate through 4-level mask process without photolithographic patterning to yield the simple fabrication process. And we herewith report for the effect of dielectric surface modification on the electrical characteristics of OTFTs. The KIST-JM-1 as an organic molecule for the surface modification is deposited onto the surface of zirconium oxide $(ZrO_2)$ gate dielectric layer. In this work, we have examined the dependence of electrical performance on the interface surface state of gate dielectric/pentacene, which may be modified by chemical properties in the gate dielectric surface.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.5
• /
• pp.451-456
• /
• 2005

This paper describes three kinds of experiments and analysis of their results related to human tactile sensitivity using an integrated tactile display system. The device can provide vibration, normal pressure and lateral slip/stretch which are important physical quantities to sense texture. We have tried to find out the efficient method of stimulating, limitation of surface discrimination by kinesthetic farce feedback and the effectiveness of the combination of kinesthetic force and tactile feedback. Seven kinds of different stimulating methods were carried out and they are single or combination of the kinesthetic force, normal static pressure, vibration, active/passive shear and moving wave. Both prototype specimen and stimulus using tactile display were provided to all examinees and they were allowed to answer the most similar sample. The experimental results show that static pressure is proper stimulus for the display of micro shape of the surface and vibrating stimulus is more effective for the display of fine surface. And the sensitivities of active touch and passive touch are compared. Since kinesthetic force feedback is appropriate to display shape and stiffness of an object, but roughness display has a limitation of resolution, the concurrent providing methods of kinesthetic and tactile feedback are applied to simulate physical properties during touching an object.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1457-1458
• /
• 2009

The fundamental parameters controlling ink-jet printing liquids are the viscosity and surface energy. The wetting contact angle determines the spread of a liquid drop on the surface and depends on the relative surface energy. The characteristics of silver ink-jet printing were studied with control of surface energy and head temperature. Polyethylene terephthalate(PET) film and Si-wafer(ptype) were used as substrates and atmospheric plasma was treated to control the surface energy. With silver ink, the hydrophilic surface treatment could reduce the radius of droplets due to the hydrophobic nature of silver ink.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.452-455
• /
• 2002

We demonstrate the wide-viewing characteristics of a twisted nematic liquid crystal display (LCD) with self-formed micro-domains through the topographical alignment and fringe field effects of dielectric surface gratings (DSG). The mutual optical compensation between micro-domains within each pixel eliminates the contrast inversion phenomenon of TN mode without complex surface treatments.

• Culinary science and hospitality research
• /
• v.20 no.5
• /
• pp.71-75
• /
• 2014

The purpose of this study is to verify antecedent variables that affect emotional labor. The results are as follows. First, display rules positively affected deep acting and negatively affected surface acting. Second, customer contact time positively affected deep acting but did not affect surface acting. Third, the interaction between display rules and customer contact time did not have significant effects on surface acting but negatively affected deep acting. The implications based on these results are as follows. First, theoretically, this study extends the range of leading variables that affect emotional labor and verifies the moderation effects between these variables. Next, practically, this study suggests that presenting harmonious criteria with regards to display rules and customer contact time that fit well into the concept of food service company is a very useful tool to manage emotional labor of the employees. The limitation of this study is that the causal relationship between variables demonstrated in this study cannot be generalized due to convenience sampling and cross sectional research.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1312-1314
• /
• 2007

The effect of gate insulator surface treatment on electrical characteristics of bottom contact (BC) and suspended source/drain (SSD) organic thinfilm transistors (OTFTs) was studied. Triisopropylsilylethynyl pentacene was used as an active material and was printed by ink-jet printing method. In case of the BC OTFTs, threshold voltage was shifted from positive to near zero, and the fieldeffect mobility was increased when the gate insulator surface was treated with hexamethyldisilazane. However, in case of SSD OTFT, threshold voltage shift was not observed and the field-effect mobility was decreased.

• Journal of Information Display
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2003

Recent progress in both low pretilt and high pretilt defect free C1 surface stabilized ferroelectric liquid crystal (SSFLC) devices is reviewed. First, by numerical calculation to investigate the balance between surface azimuthal anchoring energy and bulk elastic energy within the confined chevron layer geometry of C1 and C2, it is possible to achieve a zigzag free C1 state by low azimuthal anchoring alignment with a low pretilt angle. The critical azimuthal anchoring coefficient for defect free C1 state is calculated. Its relationship with elastic constant, chevron angle as well as surface topography effect are also discussed. Second, using $5^{\circ}$ oblique SiO deposition alignment method a defect free, large memory angle, high contrast ratio and bistable C1 SSFLC display, which has potential for electronic paper applications has also been developed. The electrooptical properties and bistability of this device have been investigated. Various aspects of defect control are also discussed.