• Corrosion Science and Technology
• /
• 제18권6호
• /
• pp.277-284
• /
• 2019

External corrosion control of buried pipe can be achieved by the combination of barrier coating and cathodic protection. Coating damage and deterioration can be induced by many reasons; damage during handling and laying, enhanced failure at low temperatures, failure during commissioning and operation, disbanding due to inadequate surface cleaning, rock penetration during installation and service etc. This work focused on the effect of survey conditions on the reliability of coating flaw detection of buried pipes. The effects of applied voltage and anode location on the detection reliability of coating flaw of buried pipe in soil with the resistivity of ca. 25.8 kΩ·cm were discussed. Higher applied voltage increased the detection reliability, regardless of buried depth, but deeper burial depth reduced the reliability. The location of the anode has influenced on the detection reliability. This behaviour may be induced by the variation of current distribution by the applied voltage and buried depth. From the relationship between the applied voltage and reliability, the needed detection potential to get a desire detection reliability can be calculated to get 100% detection reliability using the derived equation.

• 대한전자공학회논문지TC
• /
• 제43권5호
• /
• pp.169-175
• /
• 2006

본 논문에서는 GPS 수신용 안테나인 T형 슬릿을 갖는 마이크로스트립 패치 안테나를 설계 제작하였다. T형 슬릿을 삽입한 마이크로스트립 패치 안테나는 슬릿이 없는 패치 안테나 보다 낮은 주파수에서 공진한다. 이것으로부터 패치의 크기를 축소시킬 수 있다. T형 슬릿를 갖는 마이크로스트립 패치 안테나의 공진 주파수를 계산하기 위하여 패치 표면의 전류 분포로 부터 공진 주파수 공식을 유도하였다. Ensemble 6.0을 이용하여 근사식의 정확성을 검증하였다. 이렇게 구해진 공식을 이용하여 1.575GHz에서 동작하는 최적의 안테나를 설계하였으며, 그 결과 T형 슬릿을 갖는 안테나의 경우 29%까지 안테나의 크기를 감소시킬 수 있었다. 또한 슬릿을 갖는 마이크로스트립 안테나는 대역폭은 매우 좁기 때문에 협대역 특성을 개선하기 위해 구형 슬릇을 갖는 마이크로스트립 패치 안테나를 제안하였다. 제작된 T형을 갖는 마이크로스트립 패치 안테나의 공진 주파수는 1.575GHz이고 대역폭은 50MHz를 얻었다.

• Current Photovoltaic Research
• /
• 제2권1호
• /
• pp.28-35
• /
• 2014

High-efficiency in $Cu(In,Ga)Se_2$ (CIGS) solar cells were usually achieved on soda-lime glass substrates due to Na incorporation that reduces deep-level defects. However, this supply of sodium from sodalime glass to CIGS through Mo back electrode could be limited at low deposition temperature. Na content could be more precisely controlled by supplying Na from known amount of an outside source. For the purpose, an $Na_2S$ layer was deposited on Mo electrode prior to CIGS film deposition and supplied to CIGS during CIGS film. With the $Na_2S$ underlayer a more uniform component distribution was possible at $350^{\circ}C$ and efficiency was improved compared to the cell without $Na_2S$ layer. With more precise control of bulk and surface component profile, CIGS film can be deposited at low temperature and could be useful for flexible CIGS solar cells.

• 한국정보통신학회논문지
• /
• 제20권9호
• /
• pp.1633-1640
• /
• 2016

본 논문에서는 WLAN 대역에서 동작하는 오픈된 사각 모양의 마이크로스트립패치 안테나를 제안하였다. 제안된 안테나는 단일 공진 또는 다중 공진 주파수를 가변하여 유효 대역폭을 가지고 있으며 WLAN대역(2.4 - 2.484, 5.15 - 5.35, 5.25-5.825 GHz)을 만족하는 마이크로 스트립 선로를 갖는 평면형 모노폴 구조로 설계된다. 안테나는 FR-4 기판에 제작되었고 두께는 0.8 mm이다. 안테나의 동작모드와 재구성 특성을 분석하기 위해 전류분포와 전자계 분포를 분석하기 위해 상용 툴을 사용하였다. 최적화된 수치를 얻기 위해 각 패치의 길이에 따른 시뮬레이션 반사손실을 비교하였다. 최적화된 수치를 사용하여 스위치가 off 되었을 때 WLAN 밴드 (2.380 - 2.710 GHz)을 얻었으며, 스위치가 on 되었을 때 2.4 GHz 밴드 (2.380 - 2.710 GHz)을 얻었다. 제작 및 측정결과로부터 제안된 안테나의 반사손실 특성, 측정된 이득과 방사패턴 특성 결과를 얻었다.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1107-1113
• /
• 2002

This study presents the hydrogen emblittlement in the metal, which decreases the ductility and then induces the brittle fracture. The contribution deals with the effect of strain rate and notch geometry on hydrogen emblittlement of 1.25Cr-0.5Mo and 2.25Cr-1Mo steels, which are in use at high pressure vessel. Smooth and notched specimens were examined to obtain the elongation and tensile strength. For charging the hydrogen in the metal, the cathodic electrolytic method was used. In this process, current density is maintained constant. The amount of hydrogen penetrated in the specimen was detected by the hydrogen determenator(LECO RH404) with the various charging time. The distribution of hydrogen concentration penetrated in the specimen was obtained by finite element analysis. The amount of hydrogen is high in smooth specimen and tends to concentrate in the vicinity of surface. The elongation and tensile strength decreased with the passage of charging time in 1.25Cr-0.5Mo and 2.25Cr-1Mo steels. The elongation increased and tensile strength decreased as strain rate increased. As a result of this study, it is supposed that 1.25Cr-0.5Mo steel is more sensitive than 2.25Cr-lMo steel in hydrogen embrittlement. Hydrogen embrittlement susceptibility of notched specimen after hydrogen charging is more remarkable than that of smooth specimen.

• Ocean and Polar Research
• /
• 제33권2호
• /
• pp.135-147
• /
• 2011

Zooplankton is an important constituent in assessing ecosystem responses to global warming. The northern East China Sea is an important ecosystem for carbon cycling with a net sink of carbon dioxide. Despite their importance as a major component in carbon cycling, relatively little is known about zooplankton biomass structure and its regulating factors in the northern East China Sea. This study examined zooplankton biomass distribution pattern in the region from multiple cruises encompassing various seasons between 2004 and 2009. Results showed that zooplankton biomass exhibits less cross-shelf gradient in general with declining biomass to the eastern shelf towards the Tsushima Current Water. Size-fractionated biomass showed that the 1.0~2.0 mm size group, mostly copepods, dominated zooplankton biomass, comprising 38 to 48% of total biomass. Smaller zooplankton (0.2~1.0 mm) biomass, consisting mainly of Paracalanus spp, a particle eating herbivorous copepod, was positively related to chlorophyll-a concentration, but no relationship was established for larger zooplankton (1.0~5.0 mm). Spatially-averaged mean total zooplankton biomass was also highly related to chlorophyll-a concentration. These result suggest that the long-term trend of zooplankton biomass increase in this region is partly accounted for by the increases of phytoplankton biomass and productivity underway in the region. However, the underlying mechanisms of how sea surface warming in the study area leads to increased phytoplankton biomass and productivity remains unclear.

• Nuclear Engineering and Technology
• /
• 제26권1호
• /
• pp.100-107
• /
• 1994

가압경수로용 핵연료붕 내압을 계산하는 데 있어 현재의 결정론적 방법에 의한 과다한 보수성을 줄이기 위하여 통계적 계산 방법론을 개발하였다. 개발된 통계적 방법론은 반응표면 분석 방법과 Monte Carlo 계산 방법을 이용하였다. 반응표면 분석 방법을 이용하여 핵연료 제조관련 변수와 성능관련 변수를 고려하여 회귀식을 유도하였으며, 이 식의 검증은 F-test, $R^2$ 및 $C^{p}$-test 방법을 사용하여 수행하였다. 회귀식으로 부터 예측된 봉내압은 결정론적 방법을 사용하여 계산된 값과 잘 일치하였다. Monte Carlo 계산으로 구한 핵연료봉 내압의 분포는 거의 정상분포로 나타났다. 본 연구에서 개발된 통계적 방법론으로 구한 95/95 봉내압과 현재 사용되고 있는 결정론적 방법론의 봉내압과 비교한 결과 결정론적 방법론의 과다한 보수성을 크게 줄일 수 있었다.다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.217-219
• /
• 2006

This study focused an water quality response to land-based pollution loads and the appropriate pollutant load reduction in Chinhae Bay using an eco-hydrodynamic model. Land-based discharge foam urban areas, industrial complex and sewage treatment plant was the greatest contributor to cause red-tide blooms and summer hypoxia. Tidal currents velocity af the ebb tide was about 10 cm/s stronger than that of the flood tide. A residual current was simulated to. have a slightly complicated pattern with ranging from 0.1 to. 2.7 cm/s. In Masan Bay, pollutant materials cannot flaw from the inner to the outer bay easily because af residual currents flaw southward at surface and northward at the bottom. The simulation results of COD distribution showedhigh concentrations aver 3 mg/L in the inner part of Masan Bay related pollutant discharge, and charge, and lower levels less than 1.5mg/L in the central part of Chinhae Bay. For improvement water quality in Chinhae Bay, it is necessary to reduce the organic and inorganic loads from paint sources by mare than 50% and ameliorate severe polluted sediment.

• Ocean and Polar Research
• /
• 제26권1호
• /
• pp.65-75
• /
• 2004

In order to understand the water masses and their distribution in the eastern Yellow Sea from winter to spring, a cluster analysis was applied to the temperature and salinity data of Korea Oceanographic Data Center from 1970 to 1990. From December to April, Yellow Sea Cold Water (YSCW) dominates the eastern Yellow Sea, whereas Eastern Yellow Sea Mixed Water (MW) and Yellow Sea Warm Water (YSWW) are found in the southern part of the eastern Yellow Sea. MW appears at the frontal region around $34^{\circ}N$ between YSCW in the north and YSWW in the south. On the other hand, Tshushima Warm Water (TWW) is found around Jeju Island and the South Sea of Korea. These water masses are relatively well-mixed throughout the water column due to the winter monsoon. However, the water column begins to be stratified in spring due to increased solar heating, the diminishing winds and fresh water discharge, and the water masses in June may be separated into surface, intermediate and bottom layers of the water column. YSWW advances northwestward from December to February and retreats southeastward from February to April. This suggests a periodic movement of water masses in the southern part of the eastern Yellow Sea from winter to spring. YSWW may continue to move eastward with the prevailing eastward current to the South Sea from April to June. Also, the front relaxes in June, but the mixed water advances to the north, increasing salinity. The salinity is also higher in the nearshore region than offshore. This indicates an influx of oceanic water to the north in the nearshore region of the eastern Yellow Sea in spring in the form of mixed water.

• 조명전기설비학회논문지
• /
• 제22권2호
• /
• pp.57-62
• /
• 2008

본 논문에서는 전위상승에 대한 개별 접지전극과 연접된 접지전극의 비교를 다루었으며, 시험전류가 접지전극에 흐를 때 실시간으로 접지방식에 대한 전위상승이 측정 및 분석되었다. 접지시스템의 전위상승을 분석하기 위해 반구형 수조실험장치가 사용되었고, 이를 이용하여 접지방식 및 거리에 따라 전위상승이 측정되었다. 실험장치는 반구형 수조, 전원공급장치, 이송형 전위계측장치, 시험 접지전극으로 구성되었고 전위계측장치의 프로브가 수평방향으로 이송함에 따라 전위상승이 측정되었고, 접지전극으로는 80 : 1 축척의 봉형 접지전극을 사용하였다. 개별 접지전극의 전위상승이 연접된 접지전극보다 높게 나타났으며 전위분포는 접지전극으로부터의 거리에 의존하는 특성을 나타내었다.