• 한국미생물·생명공학회지
• /
• 제14권4호
• /
• pp.299-304
• /
• 1986

동질의 유전적 배경을 가지는 1, 2, 3, 4 배체의 효모에 있어서 세포 체적, 세포 표면적, 균체농도, 건조 균체량, 자외선 저항성, 호흡결손 출현빈도. 발효력, 핵산 함량을 조사하였다. 자연 돌연변이에 의한 호흡결손 변이의 출현빈도는 2, 3, 4 배체보다 1배체에서 현저히 높게 나타났다. 세포 체적, 세포 포면적, 균체농도, 건조 균체량, 자외선 저항성, 발효력, DNA함량 등은 고차배수성에 따라 현저히 높아지는 경향을 나타냈다.

• 한국표면공학회지
• /
• 제24권4호
• /
• pp.206-214
• /
• 1991

In the basic study of selective electroless Ni plating of Si wafers, plating rate and physical properties are investigated to obtain optimum conditions of contact hole filling. Si wafers are excellently activated in the concentration of 0.5M IF, 1mM PdCl2, 2mM EDTA at $70^{\circ}C$, 90sec. The optimum condition of Ni-B deposition on p-type Si wafers is 0.1M NiSO4, 0.11M Citrate, $70^{\circ}C$, pH6.8, 8mM DMAB. The main factor in the sheet resistences variation of films is amorphous and on heat treating matrix was transformed into a stable phase (Ni+Ni3B) at $300-400^{\circ}C$. But pH or DMAB concentration in the plating solution doesn't play role of heat-affected phase change.

• 한국식품영양과학회지
• /
• 제27권4호
• /
• pp.639-647
• /
• 1998

This study was carried out to produce the maltooligosaccharides directly from the culture medium containing high concentration of soluble starch as carbohydrate source by Bacillus cereus IAM 1072. Optimum conditions for the production of maltopentaose and maltooligosaccharides were predicted as 10.62 and 10.92 in C/N ration, 115.74 and 116.51 rpm in agitation speed, 30.19 and 30.9$0^{\circ}C$, respectively. And at these conditions, products of maltopentaose and maltooligosaccharides were 23.23 and 50.33g/L, respectively. From the results of continuous culture for maltopentaose, the productivity increased up to 6.9 times, showing 6.6g/L/hr compared with 0.96g/L/hr batch culture. Maltopentaose showed lower sweetness at 3% concentration representing 1/5 of that sugar. Also, swelling power of maltooligosaccharides was reached to the same point with sugar after fermentation.

• 산업기술연구
• /
• 제23권A호
• /
• pp.187-191
• /
• 2003

A hollow-fiber type polysulfone UF membrane was surface-coated with hydroxyethylmethacrylate (HEMA). The effect of various coating parameters on permeation flux, such as concentration ratio of AIBN/HEMA, solvent(water or methanol), and UV irradiation time, was investigated. The water permeation flux of oil-emulsion increased with concentration ratio of AIBN/HEMA, and increased with UV irradiation time. The flux of the membrane coated in solution using methanol as a solvent was greater than that of the membrane coated in solution using water as a solvent. The flux of both the coated and the uncoated membrane declined with the operation. The flux decline means that the membrane fouling by oil-emulsion occurs. However, the fouling of the coated membrane was much less than that of the uncoated membrane.

• Bulletin of the Korean Chemical Society
• /
• 제26권7호
• /
• pp.1083-1089
• /
• 2005

Most experimental studies available in the literature on filtration are based on observed average zeta potential of particles (usually 10 measurements). However, analyses of data using the average zeta potential alone can lead to misleading and erroneous conclusions about the attachment behavior because of the variation of particle zeta potentials and the heterogeneous distribution of the collector surface charge. To study characteristics of zeta potential, zeta potential distributions (ZPDs) of silica particles under 9 different chemical conditions were investigated. Contrary to many researchers’ assumptions, most of the ZPDs of silica particles were broad. The solids concentration removal was better near the isoelectric point (IEP) as many researchers have noticed, thus proper destabilization of particles is very important to achieve better particle removal in particle separation processes. While, the mean zeta potential of silica particles at a given coagulant dose was a function of particle concentration; the amount of needed coagulant for particle destabilization was proportional to the total surface charge area of particles in the suspension.

• Bulletin of the Korean Chemical Society
• /
• 제27권11호
• /
• pp.1844-1850
• /
• 2006

Two types of catalyst samples were prepared, one sulfated zirconia and the other silica doped sulfated zirconia. The acidity tests indicate that sulfated zirconia doped with silica has higher concentration and strength of acidic catalyst sites than undoped sulfated zirconia. The acidic surface sites have been characterized using FTIR, NMR, pyridine adsorption, TPD, XRD and nitrogen adsorption. Doping with silica increased the concentration of surface Lewis and Brfnsted acid sites and resulted in generation of proximate acid sites.The activity test indicates that doping sulfated zirconia with silica increases both the acidity and catalytic activity for liquid phase dehydration of methanol at 413-453 K. Methanol is sequentially dehydrated to dimethyl ether and ethylene over both catalysts. Significant amounts of propylene are also formed over the silica-doped catalyst, but not over the undoped catalyst.

• Membrane and Water Treatment
• /
• 제2권4호
• /
• pp.225-237
• /
• 2011

In this study, response of reversibility of membrane flux during chemically enhanced backwash (CEB) to changes in filtration time, filtration flux and coagulant concentration dosing during ultrafiltration (UF) process was investigated using a regression model. The model was developed via empirical modelling approach using response surface methodology. In developing the model, statistically designed UF experiments were conducted and the results compared with the model output. The results showed that the performance of CEB, evaluated in terms of the reversibility of the membrane flux, depends strongly on the changes in coagulant concentration dosage and the filtration flux. Also the response of the reversibility of membrane flux during CEB is independent of the filtration time. The variance ratio, VR << $F_{value}$ and $R^2$ = 0.98 obtained from the cross-validation experiments indicate perfect agreement of the model output with experimental results and also testify to the validity and suitability of the model to predict reversibility of the membrane flux during CEB in UF operation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.509-512
• /
• 2004

This research is targeting that estimate the effect on cement concrete pavement with type of chloride deicers. In order to this study objective, when chloride deicers were spread on road surface, thermal characteristics test was conducted. Also, skid resistance test according to types and concentration of chloride deicier, road surface conditions were investigated. As a test results, thermal characteristics with kind of chloride deicier could know that sodium chloride(NaCl) is exothermic reactive material, calcium chloride$(CaCl_2)$ is endothermic reactive material. And, in case of mixed salt of the calcium and sodium chloride, it could know that can change to the exothermic or endothermic reaction according to dosage ratios. Skid value by British Pendulum Tester(BPT) has shown that it is seldom difference between the types($CaCl_2$, NaCl, mixed salt) and solution concentrations(0.5, 0.8, 1.0, 4.0, $10\%$) of chloride deicier comparing with tap water except mixed salt($10\%$ solution concentration).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.476-479
• /
• 2000

In this study, mesh-type PECVD system was suggested to minimize the hydrogen concentration. The main structural difference between the triode system and a conventional system is that a mesh was attached to the substrate holding electrode. We investigated several conditions to compare with conventional PECVD. The main effect of mesh was to minimize the substrate damage by ion bombardment and to enhance the surface reaction to induce hydrogen desorption. It was also found that hydrogen concentration decreased but deposition rate increased as increasing applied dias. Applied DC bias enhanced sputtering process. Intense ion bombardment causes the weakly bonded hydrogen or hydrogen-containing species to leave the growing film and increased adatom mobility. Furthermore, addition of hydrogen gas enhance the surface diffusion of adatom. The structural properties of poly-Si films were analyzed by scanning electron microscopy(SEM).

• 한국표면공학회지
• /
• 제29권5호
• /
• pp.449-453
• /
• 1996

In order to improve EL performance, anthracene was doped into the 8-hydroxyquinoline-aluminum (Alq$^3$) light-emitting layer of organic double layered EL cells. The EL cells were fabricated on ITO glass substrates by vacuum deposition. Doping of anthracene to the light-emitting $Alq^3$layer was performed by means of co-evaporation. The doping concentration was changed in the range of 5 to 30 wt.%. It was confirmed that anthracene doping of appropriate concentration increased the available current density and brightness of the EL cells. Carrier mobility of the $Alq^3$ layer was measured by time of flight method. The influence of anthracene doping on the cell performance was discussed.