• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.69-76
• /
• 2011

According to the related reports, about 60 percents of ship collisions have resulted from operating mistake caused by human factor. Specially, the report said that negligence of observation caused 66.8 percents of the accidents due to a human factor. Hence automatic detection and tracking of an object from an IR images are crucial for safety navigation because it can relieve officer's burden and remedies imperfections of human visual system. In this paper, we present a method to detect an object such as ship, rock and buoy from a sea IR image. Most edge directions of the sea image are horizontal and most vertical edges come out from the object areas. The presented method uses them as a characteristic for the object detection. Vertical edges are extracted from the input image and isolated edges are eliminated. Then morphological closing operation is performed on the vertical edges. This caused vertical edges that actually compose an object be connected and become an object candidate region. Next, reference object regions are extracted using horizontal edges, which appear on the boundaries between surface of the sea and the objects. Finally, object regions are acquired by sequentially integrating reference region and object candidate regions.

• Korean journal of applied entomology
• /
• v.34 no.3
• /
• pp.266-277
• /
• 1995

The adult brown planthopper possesses tow oval shaped compound eyes which, on their ventral borders, curve around the base of the antennae. Compound eye of the adult brown planthopper is recognised apposition eye which each ommatidium is optically isolated from it surroundings, the rhabdoms receiving light only from their own corneal lens. Each ommatidium possesses its own dioptric apparatus formed from the cuticular cornea and an underlying crystalline cone. The retinula cells lying immediately beneath the crystalline cone have their individual rhabdomeres tightly opposed to form one central, closed rhbdom. The rhabdom stretches from the spex of the crystalline cone nearly to the basement membrane and is approximately 110~120 $\mu\textrm{m}$ in length. The crystalline cone is surrounded by a pair of primary pigment cells an these in turn are surrounded by accessory pigment cells. Accessory pigment cells extend beyond the crystalline cone surrounding the retinular cells in the distal region of the eye. The crystalline cone is surrounded by the distal-most regions of the retinula cells show the presence of seven cells and sections taken proximally in the last quarter of the omatidium before the basement membrane is reached, reveal the presence of a small, eighth retinula cell which also contributes to the central rhabdom. Each ommatidium has a central rhabdom formed from the modified inner border of all of the retinula cells. Th rhabdom consists of micrvilli arising from the inner wall of each retinula cell. In cross section th microvilli exhibit a characteristic honeycomb appearance. Pigment cells comprise the primary pigment cells enveloping the crystalline cone, the accessory pigment cells extending from the inner surface of the comea to the basement membrane and the small pigment cells of the basement membrane.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.37-44
• /
• 2016

$CO_2$-EOR (Carbon Dioxide-Enhanced Oil Recovery), one of the enhanced oil recovery methods, helps to not only enhance the production of oil, but also store carbon dioxide in underground. However, if micro fractures occur when during the injection of $CO_2$, it is difficult to make permanent storage of $CO_2$ in reservoir and can cause contamination of groundwater and soil. Therefore, in this study, we performed microseismic monitoring to investigate the occurrence of fractures during the $CO_2$ injection at the Meruap oil reservoir, Indonesia. To pick the first arrivals of microseismic events, Improved MER (Modified Energy Ratio) method was used. After picking the first arrivals, hodogram analysis was carried out by using the data recorded at three component geophones to calculate the back azimuth of events. Finally, locations of microseismic events were decided by using the results of first arrival picking and hodogram analysis. Estimated locations showed that all microseismic events were occurred at surface and any fracture did not occur around the reservoir. Moreover, by analyzing noise characteristic, we confirmed that almost of picked first arrivals were due to the repetitive mechanical noise.

• Economic and Environmental Geology
• /
• v.28 no.4
• /
• pp.395-404
• /
• 1995

The geologic structure of the Cheju volcanic island has been investigated by analyzing the gravity and magnetic data. Bouguer gravity map shows apparent circular low anomalies at the central volacanic edifice, and the maximum difference of the anomaly values on the island appears to be 30 mgal. The subsurface structure of the island is modeled by three-dimensional depth inversion of gravity data by assuming the model consists of a stacked grid of rectangular prisms of volcanic rocks bounded below by basement rocks. The gravity modeling reveals that the interface between upper volvanic rocks and underlying basement warps downward under Mt. Halla with the maximum depth of 5 km. Magnetic data involve aeromagnetic and surface magnetic survey data. Both magnetic anomaly maps show characteristic features which resemble the typical pattern of total magnetic anomalies caused by a magnetic body magnetized in the direction of the geomagnetic field in the middle latitude region, though details of two maps are somewhat different. The reduced-to-pole magnetic anomaly maps reveal that main magnetic sources in the island are rift zones and the Halla volcanic edifice. The apparent magnetic boundaries inferred by the method of Cordell and Grauch (1985) are relatively well matched with known geologic boundaries such as that of Pyosunri basalt and Sihungri basalt which form the latest erupted masses. Inversion of aeromagnetic data was conducted with two variables: depth and susceptibility. The inversion results show high susceptibility bodies in rift zones along the long axis of the island, and at the central volcano. Depths to the basement are 1.5~3 km under the major axis, 1~1.5 km under the lava plateau and culminates at about 5 km under Mt. Halla. The prominent anomalies showing N-S trending appear in the eastern part of both gravity and magnetic maps. It is speculated that this trend may be associated with an undefined fault developed across the rift zones.

• 한국해양학회지
• /
• v.30 no.5
• /
• pp.442-457
• /
• 1995

The relationships of environmental factors to the distribution patterns of the three species of ophiuroids, Ophiura kinbergi, O. sarsi and ). sarsi vadicola from Yellow Sea southeast seas and East Sea of Korea were studied to characterize their habitual niches. These three species chosen for study illustrated distinct niche and patterns according to their various preferences mainly for bottom water temperature, bottom water salinity and depth from seven environmental variables which were depth, bottom water temperature and salinity, density, bottom water oxygen content, grain size of the surface sediment, and sediment sorting coefficient. The results of habitat niche study mainly dealing with O. sarsi vadicola suggested that the optimum habitat rages were approximately 6$^{\circ}C$∼10$^{\circ}C$ in bottom temperature and 31%∼33.5% in bottom water salinity which also corresponded with the characteristic ranges of Yellow Sea Bottom Cold Water and higher probabilities of occurrence (more than 70%) were found in depth ranging from 100 to 200 m. In addition, the habitats of O. kinbergi and O. sarsi were compared with that of O. sarsi vadicola. Their ranges of habitat niches were found to have different niches in physical space of bottom water temperature, bottom water salinity and depth. Based on the distribution pattern of O. sarsi vadicola in the Yellow Sea, the ecological barrier which confined the distribution of benthic macro-invertebrates in southern Yellow Sea was determined to be the Yellow Sea Warm Current (approximately 34% < and 18$^{\circ}C$ in December) which occurs between 33$^{\circ}$ and 34$^{\circ}$N of southern Yellow Sea in winter time.

• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.78-84
• /
• 2011

In this study, we have measured the charring rate of solid sawn timber as a preceding step for develop performance based fire safety design method of wood framed building structures. The follows are the summary of fire test results carried out with $400{\times}400$ mm cross-section Douglas-fir in varied of thickness and grain directions. I) When the timber thickness increase under same dimension, the charring rate decreases gradually. It is seemed the charring layer up on a thickness roles as a insulation, gives combustion delaying time to specimen. 2) The charring rates measured at different depths (10, 20, 30, 40 mm) in timber which varying thickness (20, 40, 80, 120 mm) when exposed maximum 1 hour standard fire increase by 30 mm depth, but decrease at 40 mm. It is seemed the minimum charr layer should be 30 mm for having role of insulation. 3) The charring rate of cross section surface (direction of perpendicular to grain) was more high than that of grain direction. It can be explained by the cracks and gaps from greater charr contraction made more heat flux incident into timber.

• Tuberculosis and Respiratory Diseases
• /
• v.62 no.6
• /
• pp.499-505
• /
• 2007

Background: Triggering receptor expressed on myeloid cells 1 protein (TREM-1) is a cell surface molecule expressed on neutrophils and monocytes, and it plays an important role in myeloid cell-activated inflammatory response. The aim of this study was to investigate the diagnostic efficiency of soluble (s) TREM-1 in the patients who had pleural effusion from various causes. Methods: Forty-five patients with exudative pleural effusion were included in this study. The level of sTREM-1 was measured in both the serum and pleural fluids by immunoblot assay with using human-sTREM-1 antibody. Results: The pleural fluid sTREM-1 was significantly different in the three groups of exudative pleural effusion (p=0.011). Particularly, the patients with parapneumonic effusion were found to have significantly higher pleural fluid levels of sTREM-1 than patients with tuberculous (p<0.05) and malignant effusion, respectively (p<0.05). However, the serum sTREM-1 did not show a significant difference in the three groups. In order to evaluate the diagnostic utility of pleural fluid sTREM-1, the receiver operating characteristic (ROC) curve was constructed and the area under the curve (AUC) was 0.818 (p=0.001). Using a cutoff value of 103.5 pg/mL for the pleural fluid sTREM-1, the sensitivity and specificity were 73% and 81%, respectively, for differentiating parapneumonic effusion from tuberculous or malignant effusions. Conclusion: Pleural fluid sTREM-1 can be an additional marker for making the differential diagnosis of pleural effusion.

• Korean Journal of Ichthyology
• /
• v.10 no.2
• /
• pp.184-190
• /
• 1998

The early life history of black bullhead, Pseudobagrus koreanus, endemic to Korea was investigated to get biological information needed in artificial production of seedlings and in recovering natural resources. The fertilized eggs showed some characteristics in having heavy sticky material and minute folds which is formed radical pattern on the egg membrane. The shape of egg was spherical and $2.59{\pm}0.08$(2.45~2.70, n=10)mm in diameter. The yolk had not oil globule. The first cleavage was observed 2 hrs after insemination at $21{\sim}23^{\circ}C$, and the progressive cleavage were done about 30 min. interval. The characteristic changing of the yolk surface started at morula stage and continued to the end of gastrula. Hatching was started 72 hrs and completed 90 hrs after fertilization. The size of the larvae were 5.41~5.81mm in total length and 2.76~2.94mm in preanal length, and the number of so mites was 15-16+33~34(48~50). The barbels and swimbladder were completed and all the fins except second dorsal were appeared 1 week after hatching. The larvae attained 9.67~10.52mm in total length and 5.20~5.65mm in preanal length. All the fin sets and color pattern were completed 2 weeks after hatching and body mucus was secreted at that stage. The juvenile attained 14.59~16.02mm in standard length, 3.31~4.16mm in head length and 8.07~9.31mm in prenal length.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.124-133
• /
• 2015

Electro interstitial scan shows potential as a non-invasive screening method. It can discriminate some diseases based on electric current response to induce low intensity direct current to limbs or local area of body. DDFAO was invented in France and it is claimed that multi-channel EIS(Electro Interstitial Scan) is useful for various diseases, especially, diagnoses of endocrine system such as diabetics are very effective. In this study, we verified the repeatability and sensitivity of DDFAO by using a RC phantom model and its clinical usefulness using data obtained from normal and diabetes subject groups. As a result, it showed the repeatability and the output change according to change of phantom characteristic, but it was hard to distinguish normal and patient groups non-invasively with just six surface electrodes of DDFAO. The repeatability and the clinical accuracy was not sufficient for screening or diagnostic purposes, as well. In spite of the results with low repeatability and accuracy conducted in this study, we still need further investigations to improve the EIS-based measurement method; EIS is very convenient and simple and it shows potential as a screening tool of the whole body health conditions rather than localized disease diagnosis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.683-693
• /
• 2011

In this paper, a design of high current and broad-band microwave bias-tee was presented for a stable bias of a high power amplifier. An input impedance of bias-tee should be shown to 50 ohm with the wideband in order to be stably-biased the amplifier. For this design of the bias-tee, a capacitor of bias-tee for a DC block was designed with a high wide-band admittance by a parallel sum of capacitors, and a inductor for a RF choke and a DC feeding was designed with a high wide-band impedance by a series sum of inductors. As this inductor and capacitor for the sum has each SRF, band-limitation of lumped element was driven from SRF. This limitation was overcome by control of a resonance's quality factor with adding a resistor. 1608 SMD chips for design's element was mounted on the this pattern for the designed bias-tee. The fabricated bias-tee presented 10 dB of return loss and wide-band about 50 ohm input impedance at 10 MHz~10 GHz.