• 한국수학교육학회지시리즈A:수학교육
• /
• 제58권2호
• /
• pp.283-298
• /
• 2019

초등학교 교육과정에 포함된 측정 속성 가운데 둘레와 넓이, 겉넓이와 부피는 5, 6학년에서 집중적으로 다루어진다. 그러나 이 영역에서 학생들의 수행능력이 어느 정도가 되며 어떤 문제가 있는지에 대해서는 알려진 바가 많지 않다. 이 연구는 평면도형의 둘레와 넓이, 입체도형의 겉넓이와 부피에 대한 초등학교 6학년 학생들의 이해 정도를 진단하고, 각 요소별 수행 능력을 비교 분석하여 차후 수학 교과서 개발 및 측정 영역 지도를 위한 시사점을 도출하고자 하였다. 이를 위해 둘레, 넓이, 겉넓이, 부피, 둘레와 넓이의 관계, 겉넓이와 부피의 관계에 관련된 문항을 구성하여 6학년 학생 95명을 대상으로 수행 능력을 분석하였다. 분석결과 초등학교 6학년들의 수행능력이 둘레, 겉넓이, 둘레와 넓이의 관계, 겉넓이와 부피의 관계 영역에서 특히 낮은 것으로 드러났다. 이러한 연구 결과를 바탕으로 둘레와 넓이, 겉넓이와 부피 개념의 도입 순서와 지도 방법, 지도 순서 등에 대한 몇 가지 아이디어를 제안하였다.

• Asian Journal of Atmospheric Environment
• /
• 제10권1호
• /
• pp.1-12
• /
• 2016

Numerous researchers have proposed that surface area is a more appropriate indicator than mass for evaluating pulmonary inflammatory responses caused by exposure to fine and ultrafine particles. In this study, measurements of surface area concentrations of aerosols were conducted in Yokohama, Japan, using the diffusion charging method. $PM_{2.5}$ mass concentration and black carbon concentration in $PM_{2.5}$ were also measured. The 24-hour continuous measurement campaigns were conducted 39 times from March to November, 2014. The surface area concentration was more closely correlated with the black carbon concentration than with the $PM_{2.5}$ mass concentration. It is considered that the abundance of black carbon particles significantly affects the surface area concentration of $PM_{2.5}$. The strength of the correlation between the surface area and black carbon concentrations varied considerably among the measurement campaigns. A relatively weaker afternoon correlation was observed compared with the other time zones (morning, evening, and night). We consider that these phenomena are due to the transportation/formation of the particles other than black carbon that affects surface area concentration and/or the variation of the surface condition of the black carbon particles.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.115-118
• /
• 2005

A workpiece with a large surface area is likely to be uneven due to form error and waviness. These geometric disturbances can cause inaccurate micro shapes to be formed when micro features are micro-grooved into the surface and cause the resulting workpiece to fail to function as desired. Thus, real-time measurement and compensation is required to guarantee the form accuracy of micro features while machining a workpiece with a large surface area. In this study, a method is suggested for real-time measurement of geometric error for the micro grooving of a large flat surface using a laser displacement sensor. The measurements are demonstrated for the workpieces with large surface areas and the experimental results show that the waviness and form error are well detected.

• Journal of Electrochemical Science and Technology
• /
• 제3권4호
• /
• pp.185-189
• /
• 2012

A.c. impedances of mechanically polished CP-Ti specimens were measured at open-circuit potential (OCP) with immersion time and under applied anodic potentials between -0.2 and 1 $V_{Ag/AgCl}$ in 0.1 M NaOH solution. Capacitances of native oxide films ($C_{ox,na}$) grown naturally and capacitances of anodic oxide films ($C_{ox,an}$) formed under applied anodic potentials were obtained to examine the growth of native and anodic oxide films in 0.1 M NaOH solution and how to use $C_{ox,na}$ for the surface area measurement of Ti specimen. $1/C_{ox,na}$ and $1/C_{ox,an}$ appeared to be linearly proportional to OCP and applied potential ($E_{app}$), with proportional constants of 0.086 and 0.051 $uF^{-1}\;V^{-1}$, respectively. The $C_{ox,na}$ also appeared to be linearly proportional to geometric surface area of the mechanically polished CP-Ti fixture specimen, with proportional constants of 11.3 and $8.5{\mu}F\;cm^{-2}$ at -0.45 $V_{Ag/AgCl}$ and -0.25 $V_{Ag/AgCl}$ of OCPs, respectively, in 0.1 M NaOH solution. This linear relationship between $C_{ox,na}$ and surface area is suggested to be applicable for the measurement of real surface area of Ti specimen.

• 한국의류학회지
• /
• 제27권2호
• /
• pp.270-276
• /
• 2003

Methodology was suggested to analyze breast volume, base area of breast bulk. and surface area of breast using the 3D measurement system. Thirty-seven middle-aged (30s-40s) women wearing 80A brassiere were participated in this study. Image of the upper body was captured by Phase-shifting moire. The posture of the subject was adjusted to get the full image of the right breast. Rapidform 2001 was used for the analysis of the images. The mean breast volume was 547.0㎤ and mean base area of breast bulk was 235. I$\textrm{cm}^2$ It was also found that the volume(r=0.169) and surface area of breast(r=10.242) were loosely correlated with the circumference difference between top and under breast. Therefore, it is noted that current selection criterion of cup size based on the difference in the two kinds of breast circumference is inadequate. The result of this study is expected to contribute to the design of ergonomic brassiere as well as surgical operations in the medical field.

• Environmental Engineering Research
• /
• 제12권3호
• /
• pp.109-117
• /
• 2007

The characteristics of carbonaceous particles collected from the combustion of Vacuum Residue (VR) in a test furnace have been investigated. The physical and chemical characterization includes particle size, scanning electron microscopy of the surface structure, measurement of porosity, surface area and density, EDX/XRD analyses and measurement of chemical composition. The studies show that the carbonaceous VR particles are very porous and spheroidal, and have many blow-holes on the surface. The particles become smaller and more sponge-like as the reaction proceeds. The present porosity of VR particles is similar to that of cenospheres from the combustion of heavy oil, and the majority of pores are distributed in macro-pores above $0.03\;{\mu}m$ in diameter. Measurements of pore distribution and surface area showed that the macro-pores contributed most to total pore volume, whereas the micro-pores contributed to total surface area.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1457-1459
• /
• 2003

This study reports the surface temperature pattern of the Tokyo Metropolitan area using the ASTER surface temperature product. The product is an image processed by applying temperature-emissivity separation to atmospheric corrected infrared thermal radiance of the land surface, then converted to surface temperature by using Planck's function. Daytime and nighttime observation in a cold season and a warm season were used in this study. As a result, 1) contrast between urban and suburban, 2) extraction of heating area in urban, 3) measurement of cooling effect of green space were achieved.

• 한국광물학회지
• /
• 제15권3호
• /
• pp.195-204
• /
• 2002

광물조성과 노출표면적(exposed surface area)은 토양풍화속도 계산모델에 영향을 미치는 중요한 요인들이다. PROFILE 등 기존의 풍화속도 계산모델에서는 입도분석자료에 기초한 기하학적 계산값이나 $N_2$-BET 비표면적 등을 그대로 노출표면적으로 적용하고 있다. 그러나, 토양은 광물과 유기물의 혼합체로써 노출표면적을 정확히 구하기는 상당히 어려운 것이 사실이다. 본 연구에서는 유기물의 영향에 의한 토양광물의 노출표면적변화를 토양 깊이에 따른 peroxidation 전후의 N2-BET 비표면적값을 통해 살펴보고, 토양칼럼실험을 이용하여 풍화속도의 차이를 살펴보았다. 실험결과 peroxidation 후의 $N_2$-BET 비표면적은 1.68~4.87 $m^2$/g의 범위에서 증가하였으며, 깊이에 따라 증가하는 범위가 감소하는 경향을 보여주었다 이는 부식산 등 토양표면에 농집되어 존재하는 다양한 형태의 유기산 등이 광물의 노출표면적을 감소시키고 있다는 것을 의미한다고 할 수 있다 기존의 토양풍화속도 모델에서 토양광물 노출표면적변화 계산에 있어서 광물-유기산간의 결합에 의한 영향을 결합세기 측면에서 고려하고 정량화 하는 것이 향후과제라고 생각된다.

• Imaging Science in Dentistry
• /
• 제47권2호
• /
• pp.117-122
• /
• 2017

Purpose: The aim of this study was to compare the use of 3-dimensional (3D) laser scanning and cone-beam computed tomography (CBCT) as methods of root surface measurement. Materials and Methods: Thirty teeth (15 maxillary first premolars and 15 mandibular first premolars) from 8 patients who required extractions for orthodontic treatment were selected. Before extraction, pre-treatment CBCT images of all the patients were recorded. First, a CBCT image was imported into simulation software (Mimics version 15.01; Materialise, Leuven, Belgium) and the root surface area of each tooth was calculated using 3-Matic (version 7.01, Materialise, Leuven, Belgium). After extraction, all the teeth were scanned and the root surface area of each extracted tooth was calculated. The root surface areas calculated using these 2 measurement methods were analyzed using the paired t-test (P<.05). Correlations between the 2 methods were determined by calculating the Pearson correlation coefficient. The intraclass correlation coefficient(ICC) was used to assess intraobserver reliability. Results: The root surface area measurements ($230.11{\pm}41.97mm^2$) obtained using CBCT were slightly greater than those ($229.31{\pm}42.46mm^2$) obtained using 3D laser scanning, but not significantly (P=.425). A high Pearson correlation coefficient was found between the CBCT and the 3D laser scanner measurements. The intraobserver ICC was 1.000 for 3D laser scanning and 0.990 for CBCT. Conclusion: This study presents a novel CBCT approach for measuring the root surface area; this technique can be used for estimating the root surface area of non-extracted teeth.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.735-736
• /
• 2008