• Proceedings of the Optical Society of Korea Conference
• /
• 2006.02a
• /
• pp.275-276
• /
• 2006

• The Journal of Advanced Prosthodontics
• /
• v.16 no.3
• /
• pp.189-199
• /
• 2024

PURPOSE. This study was conducted to evaluate the effects of plasma treatment of sandblasted and acid-etched (SLA) titanium implants on surface cleansing and osseointegration in a beagle model. MATERIALS AND METHODS. For morphological analysis and XPS analysis, scanning electron microscope and x-ray photoelectron spectroscopy were used to analyze the surface topography and chemical compositions of implant before and after plasma treatment. For this animal experiment, twelve SLA titanium implants were divided into two groups: a control group (untreated implants) and a plasma group (implants treated with plasma). Each group was randomly located in the mandibular bone of the beagle dog (n = 6). After 8 weeks, the beagle dogs were sacrificed, and volumetric analysis and histometric analysis were performed within the region of interest. RESULTS. In morphological analysis, plasma treatment did not alter the implant surface topography or cause any physical damage. In XPS analysis, the atomic percentage of carbon at the inspection point before the plasma treatment was 34.09%. After the plasma treatment, it was reduced to 18.74%, indicating a 45% reduction in carbon. In volumetric analysis and histometric analysis, the plasma group exhibited relatively higher mean values for new bone volume (NBV), bone to implant contact (BIC), and inter-thread bone density (ITBD) compared to the control group. However, there was no significant difference between the two groups (P > .05). CONCLUSION. Within the limits of this study, plasma treatment effectively eliminated hydrocarbons without changing the implant surface.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.309-312
• /
• 2004

In mountainous area with high relief, topography may cause cast shadows due to the blocking of direct solar radiation. Remote sensing images of these landscapes display reduced values of reflectance for shadowed areas compared to non-shadowed areas with similar surface cover characteristics. A variety of approaches are possible, though a common step in various active approaches is first to delineate the shadows using automated algorithm and digital surface model (or digital elevation model). This articles demonstrates a common confusion caused by cast shadows

• Journal of information and communication convergence engineering
• /
• v.1 no.1
• /
• pp.58-60
• /
• 2003

Altimeter(Topex/Poseidon) and AVHRR(NOAA) data were used to study the variations and correlations of Sea Level(SL) and Sea Surface Temperature (SST) in the North East Asian Seas from November 1993 to May 1998. This region is influenced simultaneously to continental and oceanic climate. SL and SST have increased gradually every year because the global warming, and presented usually a strong annual variations in Kuroshio extension region with the influence of bottom topography.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.211-219
• /
• 2000

This paper simulated surface grinding process with statistically simulated grinding wheel topography, considering ridge formation phenomenon when grain scratch workpiece. Wheel grain is modeled as hybrid sphere and cone. Grinding wheel characteristic was evaluated with stylus by expanding the scanning region of the profilometer from a straight line to a plane. Each grain's diameter and semi-angle are assumed as normal distribution, each grain's protrusion height from wheel plane is assumed gamma distribution. So grinding wheel is simulated with grain's position randomly distributed without overlapping. Ground surface is 3-dimensionally simulated considering ridge formation of workpiece by each grain's cutting, and then surface profile and surface roughness parameters are compared with real ground workpiece.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.64-74
• /
• 1996

The meachanism for cutting epoxy resins specimens which were specially provided was experimentally investigated to obtain a fine surface finish. the specimens were cut the three-dimensional undrer dry conditions using a lathe. the relationship between the topography of the cut surface due to the change rate of temperature of the cutting condition using sintered carbides (P20, K10, KT150) was investigated. the main results obtained are as follows: 1) The change rate of temperature of the cutting edge is increased in nearly proportion ot cutting speed feed rate depth of cut. 2)The profile of surface roughness were regulated k10 but irregulated P20 KT150. 3) The surface roughness value decreased K10 rather than P20 KT150. 3) The surface roughness value decreased K10 rather than P20 KT 150.4)The cutting resistance increased thrust force rather than cutting force due to the visco-elastic material of epoxy resins.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.229-236
• /
• 1999

The surface, generated by end milling operation, is deteriorated by tool runout, vibration, tool wear and tool deflection, etc. Among them, the effect of tool deflection on surface accuracy is analyzed. Surface generation model for the prediction of the topography of machined srufaces has been developed based on cutting mechanism and cutting tool geometry. This model accounts for not only the ideal geometrical surface, but also the deflection of tool due to cutting force. For the more accurate prediction of cutting force, flexible end mill model is used to simulate cutting process. Computer simulation has shown the feasibility of the surface generation system. Using developed simulation system, the relations between the shape of end mill and cutting conditions are analyzed.

• Korean Journal of Metals and Materials
• /
• v.50 no.1
• /
• pp.8-12
• /
• 2012

This study aims to analyze the formability property of surface texturing processed automotive steel sheet for improving the sheet forming property. In the paper, the effect of cavities fabricated using the laser surface texturing technique on automotive high strength steel sheets was studied. The frictional behavior of the sheet drawing is a function of interface parameters such as sheet surface roughness, holding force, contact pressure, etc. For these reasons, automotive steel researchers want to optimize the surface topography of automotive steel sheets in order to enhance the formability. Therefore, this study presents the behavior of deformation of a laser surface texturing steel sheet by considering the frictional operation during the deep drawing process.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.8
• /
• pp.1125-1136
• /
• 2000

Fitness of clothes becomes a major concern in apparel industry. Development of basic patterns will enhance the fitness of clothes. But there are few slacks patterns for the middle-high school girls. So girls had difficulties to buy ready-made clothes of good fit. To solve this problem, it is necessary to develop basic slacks patterns. The purposes of this study was to develop basic slacks patterns based on the analysis of lower body types. 4 girls were selected among 402 anthropometric measurement subjects who are 13 to 15 year-old for the wearing tests. The result of this study can be summarized as follows; 1. Analysing the replicas of lower body surface by using gypsum method, slack patterns were developed. 2. Wearing test by the sensory evaluation showed that the developed slacks pattern was estimated more highly than existing patterns in the items of the comfort of front crotch and back crotch. 3. Wearing test by moire topography method represented that garment silhouette of developed slacks pattern was estimated more highly and garment space of waist, hip were significantly different among patterns.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.1
• /
• pp.39-48
• /
• 2013

The solar radiation is the primary energy source that drives many of the earth's physical and biological processes and climate change. Understanding its importance to the solar radiation observation is a key to understanding a broad range of natural processes, agricultural, energy and human activities. The purpose of this study is to estimate solar radiation using sunshine duration, and to estimate distribution of solar radiation using a topography factor considering surface slope and aspect in complex terrain. The result of regression analysis between ratio of solar radiation and sunshine duration from 2001 to 2010 shows high $R^2$ value of 0.878. Regression analyses indicated that topographic attributes including elevation, slope and aspect had significant effects on solar radiation. The variation of topographic factor with aspect and slope for the summer and winter are considered. The highest month of daily mean solar radiation at Jeju island appears in April of 20.61 $MJ{\cdot}m^{-2}{\cdot}day^{-1}$, and the lowest month appears in December of 6.90 $MJ{\cdot}m^{-2}{\cdot}day^{-1}$. These results provided useful quantitative information about the influence of topography on solar radiation in the island region.