Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

3D Modeling of Ground Surface with Statistical Method

통계적방법을 이용한 연삭표면의 3차원모델링

  • 김동길 (연세대학교 기계공학과 대학원) ;
  • 김영태 (연세대학교 기계공학과 대학) ;
  • 이상조 (연세대학교 기전공학부)
  • Published : 2000.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper simulated surface grinding process with statistically simulated grinding wheel topography, considering ridge formation phenomenon when grain scratch workpiece. Wheel grain is modeled as hybrid sphere and cone. Grinding wheel characteristic was evaluated with stylus by expanding the scanning region of the profilometer from a straight line to a plane. Each grain's diameter and semi-angle are assumed as normal distribution, each grain's protrusion height from wheel plane is assumed gamma distribution. So grinding wheel is simulated with grain's position randomly distributed without overlapping. Ground surface is 3-dimensionally simulated considering ridge formation of workpiece by each grain's cutting, and then surface profile and surface roughness parameters are compared with real ground workpiece.

Keywords

References

  1. 류제구, 성형 연삭공학, 대광서림, 1991
  2. S.S. Law, S.M. Wu, 'Simulation Study of the Grinding Process,' Journal of Engineering for Industry, Transaction of the ASME, Vol. 95, pp. 983-991, 1973
  3. X. Chen, B. Rowe, 'Analysis and simulation of the grinding process,' Part I, Part II, Int. J. Mach. Tools Manufact., Vol. 36/8, pp. 871-896, 1996 https://doi.org/10.1016/0890-6955(96)00116-2
  4. 손명환, 절삭 가공론, 문운당, 1992
  5. P. Koshy, V.K. Jain, G.K. Lal. 'A Model for the Topography of Diamond Grinding Wheels,' Wear, Vol. 169, pp. 237-242, 1993 https://doi.org/10.1016/0043-1648(93)90304-5
  6. J. Tamaki, T. Kitagawa, 'Evaluation of Surface Topography of Metal bonded Diamond Wheel Utilizing three-dimensional Profilometry,' Int. J. Mach. Tools Manufact., Vol. 35/10, pp. 1139-1351, 1995 https://doi.org/10.1016/0890-6955(95)00008-L
  7. P. Koshy, V.K. Jain, G.K. Lal, 'Stochastic Simulation Approach to Modelling Diamond Wheel Topography,' Int. J. Mach. Tools Manufact. Vol. 37, pp. 751-761, 1997 https://doi.org/10.1016/S0890-6955(96)00086-7
  8. H. Alawi, M.A. Younis, 'Probabilistic approach to the conformity of wheel work in grinding process,' INT. J. PRO. RES., Vol. 24/2, pp. 279-290, 1986 https://doi.org/10.1080/00207548608919728
  9. H.K. Tonshoff, J. Peters, I. Inasaki, T. Paul, 'Modelling and Simulation of Grinding Process,' Annals of CIRP, Vol. 41/2, pp. 677-688, 1992