• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2B
• /
• pp.155-163
• /
• 2011

In this study, a soil moisture estimation model was developed using a decision tree model, an artificial neural networks (ANN) model, remotely sensed data, and ground network data of daily precipitation, soil moisture and surface temperature. Soil moisture data of the Yongdam dam basin (5 sites) were used for model validation. Satellite remote sensing data and geographical data and meteorological data were used in the classification and regression tree (CART) model for data classification and the ANNs model was applied for clustered data to estimate soil moisture. Soil moisture data of Jucheon, Bugui, Sangjeon, Ahncheon sites were used for training and the correlation coefficient between soil moisture estimates and observations was between 0.92 to 0.96, root mean square error was between 1.00 to 1.88%, and mean absolute error was between 0.75 to 1.45%. Cheoncheon2 site was used for validation. Test statistics showed that the correlation coefficient, the root mean square error, the mean absolute error were 0.91, 3.19%, and 2.72% respectively. Results demonstrated that the developed soil moisture model using CART and ANN was able to apply for the estimation of soil moisture distribution.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.3
• /
• pp.125-138
• /
• 2011

This study was conducted to investigate the benthic condition around Busan Port by analysing spatio-temporal distribution pattern of polychaete community and some benthic environmental factors. Field survey was seasonally carried out at 15 stations covering in and outside of Busan Port from February to December, 2007. Water temperature, salinity and the type of surface sediment showed little changes among the stations, but factors related to organic enrichment such as TOC, AVS, coprostanol showed an obvious contrast, especially between in and outside of Busan Port. A total of96 species occurred and mean density was 1,814 ind./$m^2$. Species richness was higher at outer port than inner port, but density was higher at inner port. Dominant species were Aphelochaeta monilaris, Magelona japonica, Pseudopolydora paucibranchiata, etc. and many of them were typical species of organically enriched area. From the multivariate analyses, the whole study area was composed of two distinct polychaete communities located at the inside and outside of the port, and seasonal changes didn't have any influential effects on the structure. Coprostanol and AVS, indicators of organically enriched condition, well explained the community structures of polychaete worms in the vicinity of Busan Port. In this context, the innermost area of North Harbor was in a highly enriched state.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.3
• /
• pp.101-105
• /
• 2006

We fabricated the nano $TiN_x$ by making of reaction between titanium powder and $Si_3N_4$ during planetary milling. The $TiN_x$ powder was sintered by spark plasma sintering machine after mixing with 50 wt% of titanium powder, and the sintered body was heat-treated at $850^{\circ}C$ in order to investigate its hardness property at the elevated temperature. We analyzed crystal structure by XRD. We observed the peaks of $TiN_{0.26}$ and TiN after 10 hours milling, and we observed TiN peak mainly after 20 hours milling. The reacted particle size distribution was investigated by FE-SEM. Increase of milling time, the size of reacted particles was decreased and the $10{\sim}20nm$ size of $TiN_x$ on the surface of titanium and $TiN_x$ was observed after 20 hours milling. The micro-Vickers hardness of mixed sintered body was about $1050kgf/mm^2$.

• 한국지구과학회:학술대회논문집
• /
• 2004.02a
• /
• pp.2-12
• /
• 2004

The purpose for this study is to inquire into the effects of teaching methods in the class on the conceptual change of atmospheric pressure for middle school students. After analyzing the concept of atmospheric pressure in the middle school science textbooks on the present 7th Curriculum, classes were performed adopting classified Method A and Method B. For Method A, the textbook used that explains the concept in the view of weight. For Method B, the textbook used approaching to the concept in the views of molecular movement as well as of weight. This study consists of four classes in the third grade students of middle school in Busan, which were divided into the Method A group and the Method B group. The result of the study carried out pre-post each of these classes on the learning achievement and on the conceptual change of atmospheric pressure. The result of this study were as follows: First, the effect on the learning achievement was displayed the average score of the Method B was showing meaningful difference comparing to the Method A. Second, the effect on the conceptual change measured by verifying the score for the difference among the averages for each sub-scale three out of four conceptual factors, 'the direction of atmospheric influence and the reason', 'the principle of atmospheric action' and 'the atmospheric changes by the temperature rise on the surface of the earth and the reason', showed meaningful improvement. But, the one left factor, 'the distribution of atmospheric pressure by altitudes and the reason', displayed no meaningful difference. Third, The concept of atmospheric pressure is better defined as the pressure created by the movement of air particles, in the view of kinetic theory of gas, rather than explained by the notion of the weight of air.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.621-628
• /
• 2002

Effect of the thickness of packaging film on the ripening of mature-green mume (Prunus mume Sieb. et Zucc) fruit was investigated by measuring physicochemical changes of the fruit during storage. Fruits were packaged using low density polyethylene (LDPE) films with thicknesses of 20, 30, and 40$\mu$m and stored at the room temperature. The physicochemical properties such as contents of various pectic substances, molecular weight distribution of soluble pectic substances, and surface image of the fruit were determined during storage of 8 days. In general, regardless of the thickness of the films applied, a content of water-soluble pectin (WSP) in the fruit was increased during storage, but both contents of HCI- soluble pectin (HSP), and Ca and Mg in total alcohol-insoluble solids were decreased. Sephacryl S-300 gel filtration study revealed that fractions of high molecular weight HSP and WSP decomposed into lower molecular weight pectins during storage. The scanning electronic microscope also identified a significant structural change of the fruit skin over the storage time. It could be concluded from the results that fruits packaged with LDPE 30${\mu}{\textrm}{m}$ film maintained the highest physicochemical quality of green mume fruit during storage.

• Atmosphere
• /
• v.30 no.1
• /
• pp.31-46
• /
• 2020

The aircraft observation campaign was performed to investigate thermodynamic conditions of snowfall cloud over the East Sea of Korean peninsula from 2 February to 16 March 2018. During this period, four snowfall events occurred in the Yeongdong region and three cases were analyzed using dropsonde data. Snowfall cases were associated with the passage of southern low-pressure (maritime warm air mass) and expansion of northern high-pressure (continental polar air mass). Case 1 and Case 2a were related to low-pressure systems, and Case 2b and Case 3 were connected with high-pressure systems, respectively. And their thermodynamic properties and horizontal distribution of snowfall cloud were differed according to the influence of the synoptic condition. In Case 1 and Case 2a, atmospheric layers between sea surface and 350 hPa contained moisture more than 15 mm of TPW with multiple inversion layers detected by dropsonde data, while the vertical atmosphere of Case 2b and Case 3 were dry as TPW 5 mm or less with a single inversion inversion layer around 750~850 hPa. However, the vertical distributions of equivalent potential temperature (θ_e) were similar as moist-adiabatically neutral condition regardless of the case. But, their values below 900 hPa were about 10 K higher in Case 1 and Case 2a (285~290 K) than in Case 2b and Case 3 (275~280 K). The difference in these values is related to the characteristics of the incoming air mass and the location of the snowfall cloud.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.1033-1041
• /
• 2014

Rapid urbanization of Korea was an unprecedented example in the world and urban population increased significantly. As a result, unbalanced distribution of population is serious problem in Korea because approximately 50% of the population is concentrated in the capital area that is 10% of nation's territory, thereby occurring various urban problems including UHI. Hence, Sejong Special Autonomous City was inaugurated officially on 2 July 2012 in order to decentralize population of capital area and induce more balanced regional development. The Sejong City has been changed drastically over a period of years as developed practically since the late 2000's and is expected to have new problems of urbanization. The land cover change due to urbanization is the main cause of UHI that urban area is significantly warmer than its surrounding areas and UHI is not only affecting urban climate change but also natural environment. So the purpose of this research is to analyze level of urbanization and UHI effect and to provide the correlation analysis between Land Surface Temperature and spectral indices. To achieve this, satellite imagery from LANDSAT were used. NDVI, NDBI, and UI were calculated using red, near-infrared, mid-infrared ($0.63{\mu}m-1.75{\mu}m$) images and LST was retrieved utilizing thermal infrared ($10.4{\mu}m-12.5{\mu}m$) image. Based on each index and LST, Changes of NDVI, UI and UHI through TVI were analyzed in Sejong City. UHI effect increased around newly constructed multi-functional administrative city, the correlation between LST and NDVI was negative and UI was strong positive.

• Asian Journal of Atmospheric Environment
• /
• v.9 no.2
• /
• pp.114-127
• /
• 2015

In the Mexico City Metropolitan Area (MCMA), ozone ($O_3$) concentration is still higher than in other urban areas in developed countries. In order to reveal the current state of photochemical air pollution and to provide data for validation of chemical transport models, vertical profiles of meteorological parameters and ozone concentrations were measured by ozonesonde in two field campaigns: the first one, during the change of season from wet to dry-cold (November 2011) and the second during the dry-warm season (March 2012). Unlike previous similar field campaigns, ozonesonde was launched twice daily. The observation data were used to analyze the production and distribution of ozone in the convective boundary layer. The observation days covered a wide range of meteorological conditions, and various profiles were obtained. The evolution of the mixing layer (ML) height was analyzed, revealing that ML evolution was faster during daytime in March 2012 than in November 2011. On a day in November 2011, the early-morning strong wind and the resulting vertical mixing was observed to have brought the high-ozone-concentration air-mass to the ground and caused relatively high surface ozone concentration in the morning. The amount of produced ozone in the MCMA was estimated by taking the difference between the two profiles on each day. In addition to the well-known positive correlation between daily maximum temperature and ozone production, effect of the ML height and wind stagnation was identified for a day in March 2012 when the maximum ground-level ozone concentration was observed during the two field campaigns. The relatively low ventilation coefficient in the morning and the relatively high value in the afternoon on this day implied efficient accumulation of the $O_3$ precursors and rapid production of $O_3$ in the ML.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_3
• /
• pp.879-888
• /
• 2017

This study is a preliminary research conducted in Buhansan mountain National Park to develop a management system to predict and control oak wilt disease by indicating spatial factors which affect diffusion of the disease. After analysing altitude factor during the estimation of spatial analysis of damaged area, it is indicated that damaged trees are mainly distributed at altitude of 200-500 m and number decreased drastically over the altitude of 500 m. The result showed that 92% of total damaged trees are on slope between 20~40 degrees and the number decreased drastically on slope steeper than 40 degrees. It is indicated that damaged area is mainly distributed on southern aspect. It is estimated by using CART that slope factor affected the diffusion of disease mostly but aspect factor did not. Surface temperature and altitude showed similar effect.By simulating possible diffusion scenario, it is estimated that the disease could spread to DO-BONG Mt., northeast of Bukhansan mountain.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.303-315
• /
• 2003

Inorganic/organic composite particles were also synthesized by changing an initiator an it's concentration, concentration of an adsorbed surfactant, reaction temperature, and agitation speed in the presence of $CaCO_3$ adsorbed SDBS. The polymerization conditions were optimized according to the conversion of the core-shell composite particles. In the inorganic/organic core-shell composite particle polymerization, $CaCO_3$ absorbed surfactant SDBS of 0.5 wt % was prepared first and then core $CaCO_3$ was encapsulated by sequential emulsion polymerization using MMA, concentration of APS $3.16{\times}10^{-3}mol/L$ to minimize the formation of new PMMA particle during MMA shell polymerization. The structure characterization of the inorganic/organic core-shell particles was verified by measuring the decomposition degree of $CaCO_3$ using HCl solution. It was found that $CaCO_3$ was encapsulated by shell PMMA due to having excellent dispersion in the epoxy resin, smooth surface distinctly from spindle shape, and broad particle distribution after the capsulation.