• 펄프종이기술
• /
• 제34권1호
• /
• pp.7-11
• /
• 2002

The print quality of a ink jet printer is generally affected by three major components of the printing process: printer, ink formulation, and paper. The result of this study indicated that the surface sized paper with oxidized starch and cationic starch differed ink jet print quality in terms of ink spread and black optical density of the print image. Paper properties, like air permeability and siting degree, which may influence the ink jet printing were also measured. It was found that black print quality was controlled by starch level and ionic charge on the paper surface. Cationic surface sizing starch improved black ink jet print quality.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권1호
• /
• pp.76-82
• /
• 2002

This paper presents an experimental study of the effect of cutting tool materials on surface quality when turning hardened steels. Machining tests on a lathe are performed using polycrystalline cubic boron nitride (PCBN) and ceramic tools at various cutting conditions without coolant. From the experiments, it is observed that the radial force is the largest force component regardless the type of tool used. The specific cutting energy for the hard turning is estimated to be considerably smaller than the specific grinding energy. It is also found that cutting force and surface roughness with the PCBN tools are higher and better than those with the ceramic tools under the same cutting condition. It is due that the PCBN tools transfer the generated heat more effectively than the ceramic tools due to their higher thermal conductivity. The optimal cutting conditions for the best surface quality are selected by using an orthogonal array concept.

• Advances in environmental research
• /
• 제9권3호
• /
• pp.151-160
• /
• 2020

Water quality demonstrates physical, chemical and biological characteristics of water. The quality of surface and groundwater is currently an important concern with population growth and industrialization. Over exploitation of water resources due to demand is causing the deterioration of surface water and ground water. Periodic water quality testing must be carried out to protect our water resources. The present research analyses the spatial variation of surface water and groundwater in and around the lakes of Hyderabad. Twenty-Seven lakes and their neighboring bore water samples are obtained for water quality monitoring. Samples are evaluated for specific physico-chemical parameters such as pH, Total Dissolved Solids (TDS), Cl, SO₄, Na, K, Ca, Mg, and Total Hardness (TH). The spatial variation of water quality parameters for the 27 lakes and groundwater were analysed. Correlation and multiple regression analysis were carried out to determine comparative study of lake and ground water. The study found that most of the lakes were polluted and this had an impact on surrounding ground water.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.983-986
• /
• 2007

콘크리트 표면절삭 작업은 콘크리트 표면의 평탄성 및 부착성을 필요로 하는 공사에서 빈번히 사용되고 있으나 작업형태가 노동집약적이며, 유해한 작업환경을 보유하고 있다. 또한 장비를 다루는 기능공의 숙련도에 따라 생산성 및 절삭품질의 편차가 큰 경향이 있다. 그러므로 주변 환경오염 방지와 장비 조종자가 위험에 노출되지 않도록 하기 위한 원격조종 콘크리트 표면절삭 장비 개발이 요구된다. 그러나 원격 조종 시스템에서 조종자가 절삭면의 품질을 측정하기 난해하고 품질에 대한 객관적인 판단을 내리기가 어려우므로, 본 연구에서는 머신비젼시스템(Machine Vision System)을 적용하여 네트워크 카메라로 촬영한 절삭면의 이미지를 디지털 영상처리(Image Processing)과정을 거쳐 그 결과를 그래픽 MMI(Man-Machine Interface) 프로그램에 표현함으로써 품질관리 시스템을 구축하였다. 머신비전 알고리즘은 콘크리트 절삭면의 디지털 영상처리 알고리즘을 의미하며 본 논문에서 제안된 알고리즘을 적용하여 콘크리트 절삭면의 객관적인 품질관리 기준을 제시하고자 한다.

• 한국기계가공학회지
• /
• 제8권1호
• /
• pp.31-36
• /
• 2009

Micro-machining technology has been adopted for shape accuracy of micrometer and sub-micrometer scale, surface roughness of tens nanometer in industries. In micro-machining process the quality of machined surface is derived from machining condition and tooling. This paper investigates AE(acoustic emission) and cutting force signals according to machined surface quality related to machining condition. Machined surface quality was analyzed by the AE and cutting force parameter which reflect surface morphology. The characteristics of signal were extracted for process optimization by monitoring both the tool condition and the machined surface texture in micro end milling process.

• International Journal of Automotive Technology
• /
• 제4권4호
• /
• pp.193-201
• /
• 2003

The problem of brake judder is typically caused by defects of quality manufacturing. DFSS (Design for six sigma) is a design process for quality improvement. DFSS will result in more improved but less expensive quality products. This paper presents an implementation of DFSS for quality improvement of the brake judder of heavy-duty trucks. Carrying out 5 steps of DFSS, the major reasons for defects of quality are found. The numerical approximation of the brake system is derived by means of the response surface method. Its quality for brake judder is improved by using the sigma based robust design methodology. Results are compared between the conventional deterministic optimal design and the proposed sigma based robust design. The proposed one shows that manufacturing cost may increase as the quality level increase. The proposed one, however, is more economical in aspect of the overall cost since the probability of failure dramatically goes down.

• Advances in environmental research
• /
• 제6권1호
• /
• pp.53-65
• /
• 2017

Assessment of seasonal changes in surface water quality is an important aspect for evaluating temporal variations of river pollution due to natural or anthropogenic inputs of point and non-point sources. In this study, surface water quality data for 15 physico-chemical parameters collected from 7 monitoring stations in a river during the years from 2014 to 2016 were analyzed. The principal component analysis technique was employed to evaluate the seasonal correlations of water quality parameters, while the principal factor analysis technique was used to extract the parameters that are most important in assessing seasonal variations of river water quality. Analysis shows that a parameter that is most important in contributing to water quality variation for one season may not be important for another season except alkalinity, which is always the most important parameters in contributing to water quality variations for all three seasons.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.52-58
• /
• 2000

the quality of a TV is closely connected with the high quality surface of Braun tube. To get high quality surface an improved grinding system is needed. It has three main parts : the housing part of supporting frame the outershaft part rotat-ed by motor and the innershaft part having eccentricity from the rotation axis of the outershaft. the housing part and the outershaft part are connected by outerbearings, The outershaft part and the innershaft part are connected by innerbearings. Although the outershaft part is rotated at high-speed the innershaft part is not rotated by offset coupling. The high quality grinding surface can be obtained by this mechanism of panel surface grinder, Because the innershaft is unbalanced by eccentricity from rotation axis of outershaft the unbalancing vibration is resulted In this rotor system with high-speed rota-tion the unbalancing vibration makes the opertion unstable. In this research the transfer function is obtained bythe frequency response analysis of finite element model. The simu-lation result is proved by comparing with the experimental result measured by signal analyzer Then the results are corre-lated. in order to improve the design an optimization method is used instead of two-planes balancing method The parts of the 3-dimensional panel surface grinder satisfy the each constraint, The result shows that the design of the panel surface grinder can be optimized.

• 한국컴퓨터정보학회논문지
• /
• 제20권1호
• /
• pp.63-73
• /
• 2015

본 논문에서는 원본 영상에 존재하는 가로축 방향과 세로축 방향의 단순 볼록 곡면 혹은 단순 오목 곡면 특성을 정밀하게 조사한 후, 다양한 곡면의 특성을 효과적으로 활용하여 실제 영상의 픽셀 값에 더욱 근접한 보간 값을 구하고 이를 사용하여 확대 영상을 생성하는 확대 영상의 화질 개선 기법을 제안한다. 제안 기법의 절차에 따라 구해진 보간 값은 실제 영상에 존재하는 단순 볼록 곡면, 단순 오목 곡면, 복합 곡면상의 값을 갖게 되기 때문에 실제 영상에 더욱 근접한 확대 영상을 생성할 수 있어 확대 영상의 화질이 향상된다. 제안 기법을 적용하여 확대한 영상의 PSNR 값이 기존의 기법들을 적용하여 확대한 영상의 PSNR 값보다 큰 것을 확인하였다.

• 해양환경안전학회지
• /
• 제3권1호
• /
• pp.99-109
• /
• 1997

The in situ observations and the seawater analyses were conducted in July and August, 1996 for the purpose of describing the characteristics of organic pollution, dissolved oxygen distributions, and the evaluation of water quality in Mokpo harbour. The vertical density distribution of water column was found to be in stable structure with higher water temperature and lower salinity on surface layer at ebb tide in summer. In July, dissolved oxygen was shown to be oversaturated on surface and bottom layers, while in August, which was shown to be oversaturated on surface layer, and to be unsaturated on bottom layer as 68∼93% of saturation percentage. Dissolved oxygen of bottom layer in August was evaluated to be under the regular grades, based on Korean standards of seawater quality. In view of COD, the seawater quality of Mokpo harbour in summer was evaluated to be deteriorated due to organic wastes and graded to be the third class, and TSS of Mokpo harbour in summer was graded to be the second class, based on Korean standards of seawater quality. In particular, COD of surface layer in August was found to be under the regular grades. It is, therefore, necessary to take measures for the control of pollution loads and the proper management of seawater quality in Mokpo harbour. The distribution patterns of DO, COD, VSS and Chlorophyll-a on surface layer along the downstream center line from inner harbour to harbour entrance were similar to one another at ebb tide in August.