• International Journal of Internet, Broadcasting and Communication
• /
• 제11권1호
• /
• pp.54-59
• /
• 2019

The parametrization of the surface plays an important role in the 3D computer graphics and computer vision. Especially, it is essential in 3D mesh editing that manipulates the position of 3D objects on a computer monitor. Because computer monitors are two-dimensional, while vertices of objects that actually want to change are in a three-dimensional virtual space. In this study, we propose a new type of parametrization method that takes advantage of the special properties of circles that are common to local parameterization. Experimental results show that our parameterization method is more efficient in terms of time and space than the standard parameterization method that was designed by Floater et al.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2003년도 춘계 학술발표논문집
• /
• pp.58-61
• /
• 2003

A land surface parameterization has been used to simulate influences of the terrestrial surface on the atmosphere. A simple biosphere model (SiB2), one of land surface parameterization, calculates exchange of radiation, sensible heat, latent heat, and momentum between the surface and the atmosphere (Sellers, et al., 1996).(omitted)

• 대기
• /
• 제28권4호
• /
• pp.427-441
• /
• 2018

This study examines the impact of the urban parameterization scheme and the land cover change on simulated near surface temperature using Unified Model (UM) over the Seoul metropolitan area. We perform four simulations by varying the land cover and the urban parameterization scheme, and then compare the model results with 46 AWS observation data from 2 to 9 August 2016. Four simulations were performed with different combination of two urban parameterization schemes and two land cover data. Two schemes are Best scheme and MORUSES (Met Office Reading Urban Surface Exchange Scheme) and two land cover data are IGBP (International Geosphere and Biosphere Programme) and EGIS (Environmental Geographic information service) land cover data. When land use data change from IGBP to EGIS, urban ratio over the study area increased by 15.9%. The results of the study showed that the higher change in urban fraction between IGBP and EGIS, the higher the improvement in temperature performance, and the higher the urban fraction, the higher the effect of improving temperature performance of the urban parameterization scheme. 1.5-m temperature increased rapidly during the early morning due to increase of sensible heat flux in EXP2 compared to CTL. The MORUSES with EGIS (EXP3) provided best agreement with observations and represents a reasonable option for simulating the near surface temperature of urban area.

• 한국정보과학회논문지:시스템및이론
• /
• 제34권12호
• /
• pp.641-655
• /
• 2007

컴퓨터 그래픽스를 비롯한 여러 응용 분야에서 3차원 다면체 모델에 대한 매개 변수화(parameterization) 기법이 중요하게 연구되어왔다. 매개 변수화에 대한 연구는 주로 3차원 다면체 모델을 2차원 평면으로 매핑 시켜주는 문제를 고려하는데, 이러한 매핑 과정에서 종종 다각형의 세밀한 형태를 제대로 표현하지 못하거나, 텍스처 매핑 등의 기법을 적용할 때 일부 왜곡이 발생하는 문제가 발생하고는 한다. 이러한 문제점을 해결하기 위해서 여러 가지 왜곡 처리 방법이 연구되었지만, 3차원 물체의 임의 영역에 대한 사각형 형태의 부분 매개 변수화(local parameterization)를 수행하기에는 종종 한계점을 가지고 있었다. 본 논문에서는 투영 등위 집합이라고 하는 수학적 도구를 사용하여 3차원 다면체 모델의 특정 지역을 효과적으로 매개 변수화 해주는 기법을 제안한다. 이 방법에서는 사용자가 지정한 임의의 영역에 대해 등간격의 곡선을 생성한 후, 이를 이용하여 사각형 형태의 영역에 대한 부분 매개 변수화 정보를 추출하는 방식을 취한다. 본 논문에서는 새로운 부분 매개 변수화 기법에 대하여 자세히 설명한 후 실험 결과를 기술하도록 한다.

• 한국지리정보학회지
• /
• 제1권1호
• /
• pp.99-108
• /
• 1998

국지 기상 모형의 지표 특성을 표현하기 위해 토양 구분, 식생 구분, 지표 거칠기 길이, 지표 알베도와 엽면지수가 지면 과정 모수화 내에서 처방되어야 한다. 이 연구에서는 인공위성 관측값으로부터 계절함수로 얻어진 경,위도 1도 및 1도의 엽면지수, 지표거칠기 길이, 눈이 없을 때의 지표 알베도와 상세 격자 NDVI를 지면 과정 모형에 적용하였다. 생물권과 대기권 사이, 지면과 대기 사이의 상호작용에서 이러한 인공위성 자료를 사용한 것과 사용하지 않은 것을 비교함으로써, 열, 에너지 및 수증기 속들, 지면 기온, 바람, 식생 물함유량, 비습, 강수장의 민감도가 조사되었다.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.937-945
• /
• 2000

The assessment of machined surface is difficult because the freeform surface must be evaluated by surface fairness as well as dimensional accuracy. In this study, the machined freeform surface is modeled by interpolating the data measured on the machine tool into the mathematical continuous surface, and then the surface model is improved with the parameterization to minimize surface fairness. The accuracy reliability of the measured data is confirmed through compensation of volumetric errors of the machine tool and of probing errors. Non-uniform B-spline surface interpolation method is adopted to guarantee the continuity of surface model. Surface fairness is evaluated with the consideration of normal curvature on the interpolated surface. The validity and usefulness of the proposed method is examined through computer simulation and experiment on the machine tool.

• 대기
• /
• 제18권2호
• /
• pp.121-136
• /
• 2008

We investigate effects of vertical resolution on a parameterization of convective gravity waves (SGWDC) developed in Song and Chun (2005) through offline and online tests of the SGWDC parameterization. For offline tests, numerical simulations of the SGWDC parameterization with different number of vertical levels (L66, L117, L168, L219 and L270) from the surface to 120 km are performed for two different saturation methods. It is found that the wave momentum forcing is overestimated or underestimated in the SGWDC parameterization with different vertical resolutions, depending on the saturation methods. The increase of the vertical resolution modifies the magnitude and distribution of the wave momentum forcing in the parameterization, and this is mainly due to modification of wave saturation levels in the wave saturation processes. However the wave momentum forcing converges in the parameterizations with vertical resolutions higher than L168. For online test, the SGWDC parameterizations with vertical resolutions of L66 and L164 are implemented into a climate model with vertical resolution of L66, separately. In the L164 experiment, the wave momentum forcing decreases in the mid-latitude winter mesosphere in July and zonal mean flows are more realistically reproduced in the tropical regions compared with those in the L66 experiment. These results demonstrate that the wave momentum forcing calculated in the parameterization is sensitive to the vertical resolution, and the implementation of the SGWDC parameterization into high resolution models is required for realistic representation of the gravity wave momentum forcing in large-scale numerical models.

• 한국콘텐츠학회논문지
• /
• 제10권4호
• /
• pp.106-114
• /
• 2010

메쉬 파라메터화는 입력으로 들어온 메쉬와 파라메터 영역 사이의 부드러운 일대일 대응함수를 구하는 것으로, 삼차원 스캐너를 통해 획득한 디지털 형상을 여러 가지 응용문제에 활용하기 위해 필요한 디지털 형상 처리의 핵심기반기술이다. 본 논문에서는 구형 위상구조를 가지는 삼차원 물체에 대해, 표면뿐만 아니라 내부를 포함한 물체 전체를 단일 입방정육면체로 하모닉 매핑하는 새로운 삼차원 볼륨파라메터화 방법을 제안한다. 제안하는 방법은 입력으로 들어온 볼륨메쉬의 표면을 정육면체와 동일한 위상구조를 가지는 여섯 개의 영역으로 나누고, 이를 이용하여 볼륨 파라메터화의 경계조건을 계산한다. 이후 경계조건을 만족하며 볼륨 내부의 하모닉 에너지를 최소화하는 하모닉 매핑을 계산하여 물체 내부까지 왜곡이 적은 삼차원 파라메터화 결과를 얻어낸다. 실험결과를 통해, 본 논문에서 제안하는 방법을 통해 다양한 구형 삼차원 모델에 대해 삼차원 볼륨파라메터화 결과를 효과적으로 얻을 수 있음을 확인하였다.

• International Journal of CAD/CAM
• /
• 제8권1호
• /
• pp.11-20
• /
• 2009

The conventional methods of boundary-conformed 2D surfaces generation usually yield some problems. This paper deals with two boundary-conformed 2D surface generation methods, one conventional approach, the linear Coons method, and a new method, boundary-conformed interpolation. In this new method, unidirectional 2D surface has been generated using some of the geometric properties of the given boundary curves. A method of simultaneous displacement of the interpolated curves from the opposite boundaries has been adopted. The geometric properties considered for displacements include weighted combination of angle bisector and linear displacement vectors at all the data-points of the two opposite generating curves. The algorithm has one adjustable parameter that controls the characteristics of transformation of one set of curves from its parents. This unidirectional process has been extended to bi-directional parameterization by superimposing two sets of unidirectional curves generated from both boundary pairs. Case studies show that this algorithm gives reasonably smooth transformation of the boundaries. This algorithm is more robust than the linear Coons method and capable of resolving the 2D boundary-conformed parameterization problems.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제5권1호
• /
• pp.29-39
• /
• 2002

A general investifation into the physical mechanism that is respinsible for drag above the sea surface has been undertaken. On the basis of a ID model of the Wave Boundary Layer(WBL), under a 2D wave field, a parameterization technique for estimation of the drag and mean characteristics of WBL is described. Special attention is paid to estimation of the simplifying assumption of the theory.