• 제목/요약/키워드: Surface Contamination Level

검색결과 161건 처리시간 0.023초

넙치에서의 Vbrio vulnificus 오염 방지를 위한 백신 연구 (Bacterins to Prevent the Contamination of Vbrio vulnificus in the Flounder, Paralichthys olivaceus)

  • 손상규;김명석;박준효;유민호;정현도
    • 한국수산과학회지
    • /
    • 제35권1호
    • /
    • pp.1-7
    • /
    • 2002
  • 비브리오 패혈증의 원인균인 V vulnificus에 대한 어류의 저항성을 증강시키기 위한 연구로써, 비브리오 백신이 경구로 투여된 넙치에서의 특이 또는 비특이적 면역반응을 조사하였다. 넙치에 대하여 UHKB (uncoated heat killed bacterin of V. vulnincus)를 20rng1kg b.w.의 농도로 경구를 통하여 4주 연속 투여 (4W) 또는 1주 동안 투여하고 2주 동안 투여하지 않다가 다시 1주 동안 투여 (1-2-lW) 하는 두 가지 방법으로 실시한 후 형성된 혈청내 특이 항체량을 비교한 결과 1-2-1W group은 4W group에는 도달하지 못하였지만 명백히 증가된 특이 항체량을 보여주었다. UHKB를 1주일에 2회씩 4주 연속 투여한 실험구가 최종 투여 후 2주 째부터 가장 높은 항체가를 보여 주었고 이러한 경향은 전 실험기간 동안 계속 유지되었다. 이러한 실험 결과는 단일세포수준에서 분석된 특이항체 생성세포 (SASC) 수의 계측에서도 확인되었는데 백신의 최종 경구투석 후 1주 째부터 대조구에 비하여 증가를 보인 실험구의 SASC수는 최종 투여 후 8주 째까지 유지되었다. 그러나 내산성으로 제조된 백신 (ECHB)은 V.vulnificus에 대한 항체생성 면역반응 그리고 인위 감염시킨 V vulnifcus (1$\times$10 CFU/kg b.w.) 생균의 체내 제거능력 분석 양쪽 모두에서 UHKB에 비하여 낮은 결과를 보여 주었다. 그러므로 넙치에 경구 투여된 UHKB는 V vulnificus의 오염을 억제 할 수 있는 효과적인 방법으로 확인되었으나 내산성으로 제조된 ECHB는 면역반응 증가를 유도하지 못하는 것으로 나타났다.

시화호 조력발전소 가동으로 인한 퇴적물 내 중금속 오염 특성 변화 (The Spatial and Vertical Variations of Metal Pollution in Sediments after Tidal Power Plant Operation in Shihwa Lake)

  • 이지현;정혜령;최진영;나공태
    • 한국해양학회지:바다
    • /
    • 제24권4호
    • /
    • pp.535-547
    • /
    • 2019
  • 본 연구에서는 조력발전소 가동 이후 퇴적물 내 공간적 중금속 오염변화 특성을 알아보기 위하여, 2015년 표층퇴적물, 퇴적물 코어, 입자성 침강물질 내 중금속 농도를 분석하고 가동 이전인 2009년과의 비교를 실시하였다. 2015년에 채취한 표층퇴적물 내 중금속의 평균 농도는 조력발전소 가동 이전인 2009년에 비해 8% (Cd)~31% (Zn, Hg) 감소하였다. 본 연구에서 분석된 8개 원소를 모두 포함한 오염부하지수(PLI)를 계산한 결과, 2015년 자료가 2009년에 비해 중금속 오염도가 18% 감소하였다. 하지만 2015년에도 산업단지에 인접한 상류지역에서는 여전히 Cu, Zn, Pb가 주의기준(TEL)을 초과하였다. 조력발전소 가동 이전에 비해 2015년 중금속에 오염된 퇴적 깊이는 S6 정점에서는 15 cm, S7 정점에서는 12 cm 증가하였으나 중금속의 평균농도는 감소하였다. 입자물질의 총 침강속의 평균은 2009년에 32.5 g/㎡/d에서 2015년 103.5 g/㎡/d로 입자의 침강량이 3.2배 높아졌다. 수층의 입자물질 증가는 조력발전소 가동에 따라 저층 퇴적물이 재부유된 것으로 판단된다. 코어 시료에서 오염 퇴적 깊이와 입자물질의 침강속 증가는 조력발전소 가동으로 인해 발생한 해류의 영향으로 저층 퇴적물이 재부유되어 다른 지역으로 이동/퇴적된 사실을 나타내고 있다. 표층퇴적물과 마찬가지로 상류지역 코어에서는 여전히 Cr, Cu, Zn, Pb, Cd이 주의기준을 초과하고 있었으며, 중금속 오염 퇴적물이 40 cm 이상 축적되어 있어 여전히 산업단지를 통한 중금속 오염이 심각한 것으로 나타났다. 조력발전소 가동에 의한 해수 유통량의 증가로 시화호 중금속 오염은 다소 감소하였으나, 산업활동을 통한 중금속의 오염은 여전히 존재하고 있으며 퇴적물 재이동을 통해 오염된 퇴적물이 시화호 외측으로 방류되어 환경 혹은 생태계에 악영향을 미칠 가능성이 있다. 따라서 금속 안정동위원소를 활용한 오염원 추적과 같은 과학적 조사와 오염원을 줄이기 위한 정책적인 결단이 필요한 것으로 판단된다.

농업용 저수지에서 Bisphenol A의 잔류실태조사 (Residue Study for Bisphenol A in Agricultural Reservoirs)

  • 조일규;남효송;전용배;박준성;나태웅;김백종
    • 한국환경농학회지
    • /
    • 제35권4호
    • /
    • pp.270-277
    • /
    • 2016
  • 본 연구는 경기도, 충청도, 전라도, 경상도의 주요 농업용 저수지의 농용수와 저니토을 채취하여 비스페놀A의 잔류량을 조사하여 저감방법을 개발하는데 기초자료로 활용하고자 수행하였다. 경지 지역에서는 bisphenol A가 농용수에서 $0.05-1.00{\mu}g/L$, 저니토에서 $0.5-7.9{\mu}g/kg$이 검출되었고 1개 지역에서만 $16.00{\mu}g/kg$이 검출되었다. 충남지역 30개 지점에서 채취한 시료를 분석한 결과 bisphenol A가 농용수에서는 $0.05-0.13{\mu}g/L$, 저니토에는 $0.4-2.4{\mu}g/kg$ 수준으로 검출되었고 다만, 1개 지역에서만 $34.0{\mu}g/kg$이 검출되 었다. 충북의 28개 지역에서 채취한 시료 분석 결과 농용수에서는 $0.05-0.18{\mu}g/L$, 저니토에서는 $0.8-3.93{\mu}g/kg$이 검출되었고 1개 지역에서만 $14.43{\mu}g/kg$이 검출되었다. 전남 지역 농용수에서는 $0.06-0.17{\mu}g/L$, 저니토에서는 $0.1-9.0{\mu}g/kg$ 수준으로 검출되었고 최대 $12.1{\mu}g/kg$까지 검출되었다. 전북지역의 농용수에서는 $0.05-0.06{\mu}g/L$, 저니토에서는 $0.1-3.8{\mu}g/kg$ 수준으로 다른 지역에 비해서 미량이 검출되었다. 경남지역에서 채취한 농용수에서는 $0.06-0.11{\mu}g/L$, 저니토에서는 $0.2-9.2{\mu}g/L$ 수준으로 검출되었고 경북지역에서는 각 각 $0.05-0.06{\mu}g/L$, $0.1-0.35{\mu}g/kg$ 수준으로 검출되었다. 분석 결과 농업용 저수지의 농용수와 저니토에서 bisphenol A의 잔류량이 $10{\mu}g/kg$ 이상인 곳은 13개 지점이었다. $10{\mu}g/kg$ 이상이 검출된 농용수 주변에서 재배되는 농작물에 bisphenol A의 이행여부를 조사할 필요가 있을 것으로 판단된다.

PM2.5농도 산출을 위한 경험적 다중선형 모델 분석 (Analysis of Empirical Multiple Linear Regression Models for the Production of PM2.5 Concentrations)

  • 추교황;이규태;정명재
    • 한국지구과학회지
    • /
    • 제38권4호
    • /
    • pp.283-292
    • /
    • 2017
  • 본 연구에서는 서울지역의 지상 미세먼지($PM_{2.5}$) 농도를 산출하기 위하여 경험적인 모델들을 개발하였다. 연구에 이용한 자료는 2012년 1월 1일부터 2013년 12월 31일까지이며 Terra와 Aqua위성의 MODIS센서에서 산출되는 에어로졸 광학두께, 옹스트롬 지수, 기상변수들과 행성경계층두께와 관련된 6개의 다중 선형 회귀모델들의 차이를 분석하였다. 그 결과 에어로졸 광학두께와 옹스트롬 지수, 상대습도, 풍속, 풍향, 행성경계층두께, 기온 자료를 입력 자료로 사용한 $M_6$모델이 가장 좋은 결과를 보였다. 통계적인 분석에 따르면 $M_6$ 모델을 사용하여 계산된 $PM_{2.5}$와 관측된 $PM_{2.5}$농도 사이의 결과는 상관계수(R=0.62)와 평균제곱근오차($RMSE=10.70{\mu}gm^{-3}$)이다. 또한 산출된 계절별 지표면 $PM_{2.5}$농도는 여름철(R=0.38)과 겨울철(R=0.56)보다 봄(R=0.66)과 가을철(R=0.75)에 상대적으로 더 좋은 상관 관계를 보였다. 이러한 결과는 에어로졸 광학두께의 계절별 관측 특성으로 인한 것으로써 다른 계절에 비하여 여름과 겨울철 에어로졸 광학두께 관측이 구름과 눈/얼음 표면에 의한 관측 제한과 오차를 가져온 것으로 분석되었다. 따라서 본 연구에서 사용한 경험적 다중선형회귀 모델은 위성에서 산출된 에어로졸 광학두께 자료가 지배적인 변수로 작용하며 $PM_{2.5}$산출 결과들을 향상시키기 위해서는 추가적인 기상 변수를 이용해야 할 것이다. 또한 경험적 다중선형회귀 모델을 이용하여 $PM_{2.5}$를 산출한 결과는 인공위성 자료로부터 대기환경 감시를 가능하게 하는 방법이 될 수 있어 유용할 것이다.

망간슬래그의 비소에 대한 수착특성 연구 (Characterization of Arsenic Sorption on Manganese Slag)

  • 설정우;김성희;이우춘;조현구;김순오
    • 한국광물학회지
    • /
    • 제26권4호
    • /
    • pp.229-244
    • /
    • 2013
  • 비소의 오염은 다양한 자연적 또는 인위적 원인들로 인하여 발생할 수 있다. 비소의 자연상 다양한 화학종 중 3가와 5가 형태로 대부분 존재하고, 비소의 거동은 Al, Fe, Mn 산화물 등에 의해 영향을 받는다. 이에 본 연구는 Mn, Si, Ca 등의 성분이 많이 포함된 망간슬래그를 이용한 비소 수착특성을 규명하기 위해 수행되어졌다. 망간슬래그의 수착제로서의 주요한 특성을 조사하고 평형론과 반응 속도론 실험을 통해 비소 화학종별 수착양상을 고찰하였다. 망간슬래그의 비표면적은 $4.04m^2/g$, 전위차 적정법에 의해 측정된 영전하점(point of zero salt effect, PZSE)은 7.73으로 측정되었다. pH 4, 7, 10의 조건으로 두 비소 화학종의 수착반응에 대한 평형실험 결과 3가 비소보다 5가 비소가 수착량이 더 컸으며 망간슬래그와의 친화력이 더 높은 것으로 나타났다. 3가 비소는 pH 7에서, 5가 비소는 pH 4에서 수착량이 가장 높게 나타났는데 이는 pH에 따른 두 비소 화학종의 존재형태와 망간슬래그의 표면전하 간 상호작용에 기인한 것이다. 수착반응은 3가 비소와 5가 비소 모두 2시간 이내에 최대 수착량에 도달하였고, 반응속도 실험결과를 다양한 반응속도 모델들에 모사하였을 때, 유사이차(pseudo-second-order)와 포물선(parabolic) 모델이 가장 적합한 모델로 조사되었다.

Detection of Campylobacter jejuni in food and poultry visors using immunomagnetic separation and microtitre hybridization

  • Simard, Ronald-E.
    • 한국어업기술학회:학술대회논문집
    • /
    • 한국어업기술학회 2000년도 춘계수산관련학회 공동학술대회발표요지집
    • /
    • pp.71-73
    • /
    • 2000
  • Campylobacter jejuni is most frequently identified cause of cause of acute diarrhoeal infections in developeed countries, exceeding rates of illness caused by both salmonella and shigilla(Skirrow, 1990 ; Lior 1994). Previous studies on campylobacter jejuni contamination of commercial broiler carcasses in u.s.(Stern, 1992). Most cases of the disease result from indirect transmission of Campylobactor from animals via milk, water and meat. In addition to Campylobactor jejuni. the closely relates species Campylobactor coli and Campylobactor lari have also been implicated as agents of gastroenteritis in humans. Campylobactor coli represented only approximately 3% of the Campylobactor isolates from patients with Campylobactor enteritis(Griffiths and Park, 1990) whereas Campylobactor coli is mainly isolated from pork(Lmmerding et al., 1988). Campylobactor jejuni has also been isolated from cases of bacteremia, appendicitis and, recently, has been associated with Guillai-Barre syndrome(Allos and Blaser, 1994; von Wulffen et al., 1994; Phillips, 1995). Studies in volunteers indicated that the infectious dose for Campylobactor jejuni is low(about 500 organisms)(Robinson, 1981). The methods traditionally used to detect Campylobactor ssp. in food require at least two days of incubation in an enrichment broth followed by plating and two days of incubation on complex culture media containing many antibiotics(Goossens and Butzler, 1992). Finnaly, several biochemical tests must be done to confirm the indentification at the species level. Therfore, sensitive and specific methods for the detection of small numbers of Campylobactor cells in food are needed. Polymerase chain reaction(PCR) assays targeting specific DNA sequences have been developed for the detection of Campylobactor(Giesendorf and Quint, 1995; Hemandex et al., 1995; Winter and Slavidk, 1995). In most cases, a short enrichment step is needed to enhance the sensitivity of the assay prior to detection by PCR as the number of bacteria in the food products is low in comparison with those found in dinical samples, and because the complex composition of food matrices can hinder the PCR and lower its sensitivity. However, these PCR systems are technically demanding to carry out and cumbersome when processing a large number of samples simutaneously. In this paper, an immunomagnetic method to concentrate Campylobactor cells present in food or clinical samples after an enrichment step is described. To detect specifically the thermophilic Campylobactor. a monoclonal antibody was adsorbed on the surface of the magnetic beads which react against a major porin of 45kDa present on the surface of the cells(Huyer et al., 1986). After this partial purification and concentration step, detection of bound cells was achieved using a simple, inexpensive microtitre plate-based hybridization system. We examined two alternative detection systems, one specific for thermophilic Campylobactor based on the detection of 23S rRNA using an immobilized DNA probe. The second system is less specific but more sensitive because of the high copy number of the rRNA present in bacterial cell($10^3-10^4$). By using specific immunomagnetic beads against thermophilic Campylobactor, it was possible to concentrate these cells from a heterogeneous media and obtain highly specific hybridization reactions with good sensitivity. There are several advantages in using microtitre plates instead of filter membranes or other matrices for hybridization techniques. Microtitre plates are much easier to handle than filter membranes during the adsorption, washing, hybridization and detection steps, and their use faciilitates the simultanuous analysis of multiple sample. Here we report on the use of a very simple detection procedure based on a monoclonal anti-RNA-DNA hybrid antibody(Fliss et al., 1999) for detection of the RNA-DNA hybrids formed in the wells.

  • PDF

DRASTIC 모델 및 지하수 수치모사 연계 적용에 의한 부여읍 일대의 지하수 오염 취약성 평가 (A Joint Application of DRASTIC and Numerical Groundwater Flow Model for The Assessment of Groundwater Vulnerability of Buyeo-Eup Area)

  • 이현주;박은규;김강주;박기훈
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제13권1호
    • /
    • pp.77-91
    • /
    • 2008
  • 본 연구에서는 지하수 오염 취약성 평가 방법 중 가장 활용도가 높은 DRASTIC 기법 및 지하수 수치모사 기법을 병행하여 충청남도 부여군 부여읍 일대의 지하수 오염 취약성 변화를 평가하였다. 특히, DRASTIC 기법에서 사용되는 7가지 수리인자들 중 취약성에 대한 민감도가 상대적으로 높고 비교적 장기간 자료의 획득이 용이하지 않은 '지하수위(depth to water)' 인자에 대하여 수치모사 기법을 적용하여 시-자료에 대한 동적 보간을 실시하였으며, 이를 통하여 시간에 따른 지하수위 변화가 지하수 오염 취약성에 미치는 영향을 검토하였다. 연구의 대상 지역은 부여군 부여읍 일대로 충적 대수층을 대상으로 기 실시된 지하수 수위자료를 보정대상으로 하였으며 연구지역의 지하수위 분포양상을 모사하기 위하여 유한차분모델인 MODFLOW를 이용하였다. 지하수 수치모사에는 정류 및 부정류 모사가 모두 실시되었다. 그 결과 기존 지구통계기법을 통한 지하수위 보간에서 가장 큰 가중치를 갖는 지형적 요인뿐만 아니라 유역 암상이나 지질특성 등과 같은 제반 수리지질학적 요인까지 복합적으로 반영하는 지하수위 자료를 얻을 수 있었다. 기존 연구에서 수위자료를 보완할 때 주로 이용되는 기법인 크리깅은 수치모사와는 달리 강우나 계절적 영향, 암상이나 지질등과 같은 요인들은 반영하지 못한다. 또한 수치모사를 통하여 얻어진 수위자료는 부정류 모사가 가능함으로 인하여 풍수기와 갈수기 그리고 평수기의 지하수위 변화 등도 파악할 수 있다는 장점이 있다. 모사를 통하여 얻어진 지하수위 자료와 공동크리깅 방법을 통해 얻어진 지하수위 자료를 입력자료로 하여 연구지역에 지하수 오염 취약성을 비교 평가한 결과 평수기의 경우 유사한 경향의 지하수 오염 취약성을 보였다. 또한 공동크리깅을 통해 분석이 어려운 분기별 지하수 오염 취약성 평가 결과 강우량이 많은 여름철을 포함한 분기와 강우량이 가장 적은 겨울철을 포함한 분기가 뚜렷한 취약성 차이를 보이는 것으로 분석되었다. 본 연구에서 제시하는 바와 같이 지하수 오염 취약성 평가에 있어 가장 큰 민감도를 갖는 수위자료의 수가 공간적 혹은 시간적으로 부족한 경우 수치모사 적용을 통해 자료의 한계성을 보완할 수 있으며 시간적인 보간이 이루어질 수 있어 유용할 수 있을 것이라 판단된다.

공단 인근 농경지 토양 중 중금속 함량 평가 (Evaluation on Heavy Metal Contents in Agricultural Soils around Industrial Complexes in Korea)

  • 윤순강;채미진;김유학;공명석;정하일;김석철;김명숙;박성진;이창훈;양재의;김성철;김기인;김권래;정구복
    • 한국환경농학회지
    • /
    • 제37권2호
    • /
    • pp.141-145
    • /
    • 2018
  • 공단 인근 농경지에 중금속 농도의 상태를 파악하기 위하여 전국에 60개 공단 인근 농경지에서 1,200점(표토, 심토 각각 600점)의 토양시료를 채취하여 전함량 농도를 분석하였다. 토양 중금속 농도는 Pb, Ni, As 가 1지점씩 토양오염 우려기준을 초과한 것을 제외하고는 기준이하 수준이었다. 공단 인근 농경지에 표토와 심토 중에 중금속 농도의 평균치는 유사한 수준이었다.

한반도 서·남해 주요 갯벌 퇴적물의 시·공간적 변화: 입도, 유기물, 중금속 (Spatial and Temporal Changes in Sediments of Major Tidal Flats in the Western and Southern Korean Coasts: Grain Size, Organic Matter, Trace Metals)

  • 김은영;류상옥;최대업;이재환;오하늘;오선관;고병설;김영남;여정원
    • 한국해양학회지:바다
    • /
    • 제24권1호
    • /
    • pp.54-63
    • /
    • 2019
  • 국가해양생태계종합조사의 일환으로 2015년부터 2017년까지 3년간 강화남단, 가로림만, 증도, 순천만 등 한반도 4개 대표 갯벌에서 시계열 변화에 따른 퇴적환경 및 유 무기 오염현황을 조사하였다. 조사시기 및 지역별 퇴적물의 평균입도는 강화남단 $5.0-5.3{\varnothing}$, 가로림만 $4.5-4.8{\varnothing}$, 증도 $6.1-6.5{\varnothing}$, 순천만 $8.6-8.7{\varnothing}$이었다. 전반적으로 강화남단에서 순천만으로 남하함에 따라 입도가 조립해지는 경향을 나타내었고, 순천만에서 가장 세립한 경향을 보였다. 조사시기별로 강화남단과 증도의 경우 2015년보다 2017년에 평균입도가 보다 세립화되는 경향을 나타내었다. 강열감량은 2015년 순천만에서 15.5%로 다른 지역에 비해 상대적으로 높았으나 2016년 8.3%, 2017년 7.0%로 시간의 경과에 따라 점차 감소되었다. 미량금속 농도는 증도와 순천만의 일부정점에서 Zn와 As가 주의기준(TEL)을 초과하였으나 기타 금속의 경우 오염농도 이하의 범위로 분석되어 오염의 개연성이 나타나지 않았다. 연구지역내 퇴적물중 평균입도와 미량금속 농도 사이의 관계를 살펴본 결과, 증도의 경우 수은을 제외한 모든 미량금속과 강열감량이 평균입도와 정의 상관성(r=0.40-0.88, P < 0.05)을 보였다. 반면 순천만의 경우, 입도와 미량금속은 유의한 상관성이 없는 것으로 파악되었으며, 강열감량과 미량금속 간에 음의 상관성(p < 0.05)을 나타내었다. 퇴적물의 미량금속 오염을 평가하기 위하여 농집지수 $I_{geo}$를 계산한 결과, Cu, Zn, Pb, Cd, Hg에 대해서는 1보다 작은 범위로 오염되지 않았고, As의 경우 순천만과 증도의 일부정점에서 약간 오염된 수준에 해당되었다.

Progress of Composite Fabrication Technologies with the Use of Machinery

  • Choi, Byung-Keun;Kim, Yun-Hae;Ha, Jin-Cheol;Lee, Jin-Woo;Park, Jun-Mu;Park, Soo-Jeong;Moon, Kyung-Man;Chung, Won-Jee;Kim, Man-Soo
    • International Journal of Ocean System Engineering
    • /
    • 제2권3호
    • /
    • pp.185-194
    • /
    • 2012
  • A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.