• 제목/요약/키워드: Suppression

검색결과 5,304건 처리시간 0.033초

항공기 지상실험에 의한 소음 저감 방안에 관한 연구 (A study of the noise suppression system at the aircraft ground run-up test room)

  • 김인수;고철수;김형근
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 추계학술대회논문집
    • /
    • pp.718-723
    • /
    • 2003
  • The number of jet aircraft is increasing. The aircraft noise making people near airports nervous have become a serious social problem. The aircraft noise can be classified into two groups; noise being generated at take-off or landing and noise form run-up test on the ground. In this paper, we consider the aircraft noise from run-up test on the pound and we suggest the noise suppression system.

  • PDF

Performance of a Compton Suppression Spectrometer of the SNU-KAERI PGAA Facility

  • Sun Gwang Min;Park Chang Su;Choi H.D.
    • Nuclear Engineering and Technology
    • /
    • 제35권4호
    • /
    • pp.347-355
    • /
    • 2003
  • The \gamma-ray spectrometer of the PGAA (Prompt Gamma Activation Analysis) facility constructed at HANARO of the Korea Atomic Energy Research Institute was upgraded to the multi-mode spectrometer including the single mode, the Compton suppression mode and the pair mode. The performance of the spectrometer was tested and summarized. The background count rate and the uncertainty of the detection efficiency were reduced greatly in comparison with those before the new installation.

Vibration control of laminated composite plates using embedded smart layers

  • Reddy, J.N.;Krishnan, S.
    • Structural Engineering and Mechanics
    • /
    • 제12권2호
    • /
    • pp.135-156
    • /
    • 2001
  • Analytical solutions and finite element results of laminated composite plates with smart material layers embedded in them are presented in this study. The third-order plate theory of Reddy is used to study vibration suppression characteristics. The analytical solution for simply supported boundary conditions is based on the Navier solution procedure. The velocity feedback control is used. Parametric effects of the position of the smart material layers, material properties, and control parameters on the suppression time are investigated. It has been found that (a) the minimum vibration suppression time is achieved by placing the smart material layers farthest from the neutral axis, (b) using thinner smart material layers have better vibration attenuation characteristics, and, (c) the vibration suppression time is larger for a lower value of the feedback control coefficient.

Analysis of the JND-Suppression Effect in Quantization Perspective for HEVC-based Perceptual Video Coding

  • Kim, Jaeil;Kim, Munchurl
    • IEIE Transactions on Smart Processing and Computing
    • /
    • 제4권1호
    • /
    • pp.22-27
    • /
    • 2015
  • Transform-domain JND (Just Noticeable Difference)-based for PVC (Perceptual Video Coding) is often performed in quantization processes to effectively remove perceptual redundancy. This study examined the JND-suppression effects on quantized coefficients of transform in HEVC (High Efficiency Video Coding). To reveal the JND-suppression effect in quantization, the properties of the floor functions were used for modeling the quantized coefficients, and a JND-adjustment process in an HEVC-compliant PVC scheme was used to tune the JND values by analyzing the JND suppression effect. In the experimental results, the bitrate reduction decreases slightly, but the PSNR and perceptual quality are improved significantly when the proposed JND adjustment process is applied.

Oscillator with High Harmonic Suppression Using Split Quarterwave Microstrip Resonator

  • Cho, Ho-Yun;Go, Min-Ho;Jo, Yun-Hyun;Park, Hyo-Dal
    • ETRI Journal
    • /
    • 제33권1호
    • /
    • pp.125-127
    • /
    • 2011
  • This letter presents a new type of resonator, namely, the split quarterwave microstrip resonator (SQMR), to improve the poor harmonic suppression and low Q-factors in conventional quarterwave microstrip resonators. An oscillator incorporating the proposed SQMR is designed, fabricated, and tested to demonstrate that, not only the second harmonic suppression, but also the phase noise of the oscillator can be improved. The oscillator with the SQMR shows improved second harmonic suppression of -74.59 dBc and phase noise figure of merit of -169.77 dBc/Hz at 1 MHz offset.

2유체 미세 물분무 소화노즐의 분무유동 특성 (Spray Flow Characteristics of Twin-fluid Water Mist Nozzle for Fire Suppression)

  • 김봉환;최효성;김동건
    • 한국기계가공학회지
    • /
    • 제10권3호
    • /
    • pp.60-66
    • /
    • 2011
  • In the present investigation, experimental studies were conducted on the fire suppression performance of twin-fluid water mist spray which is subjected to thermal radiation in a closed space. Downward-directed water-mist sprays, interacting with an under kerosene pool fire, were investigated in a test facility. The mass mean diameter of water-mist droplets were measured by PMAS under various flow conditions. The developed twin-fluid water mit spray nozzle satisfied the criteria of NFPA 750, Class 1. The mechanism of fire suppression by fine water mist was concluded to be the cooling of the fire surface which leads to the suppression of fuel evaporation. It was proved that the automatic twin-fluid water mist spray system under lower pressures could be applied to an industrial facilities.

스펙트럼 공유를 위한 직교 주파수 분할 다중 (OFDM) 시스템에서의 사이드로브 억압 기법 (Sidelobe Suppression Technique in OFDM Systems for Spectrum Sharing)

  • 황유모
    • 전기학회논문지
    • /
    • 제58권8호
    • /
    • pp.1633-1637
    • /
    • 2009
  • We propose a new technique for sidelobe suppression in orthogonal frequency division multiplexing (OFDM) systems. Sidelobe suppression is an essential technique to design OFDM based overlay system. The proposed technique is based on the combination of the multiple choice sequence (MCS) with the conventional windowing of OFDM signal in time domain. The MCS is choosing the one sequence which has lowest power in sidelobes from the produced set of sequences. The main advantage of proposed technique is that it fully utilizes the available bandwidth to transmit data. Simulation results show that by combining MCS with conventional windowing technique, the sidelobes in OFDM system can be significantly reduced

Optimization of Programmed Suppression in a Cell-Free Protein Synthesis System with Unnatural Amino Acid S-(2-Nitrobenzyl)cysteine

  • HYUN JOO;KANG, TAEK JIN;HUI KYOUNG SONG;JIN HO AHN;CHA YONG CHOI
    • Journal of Microbiology and Biotechnology
    • /
    • 제13권3호
    • /
    • pp.344-347
    • /
    • 2003
  • Unnatural amino acid S-(2-nitrobenzyl)cysteine was incorporated into human erythropoietin by using a programmed suppression of nonsense codon in a cell-free protein synthesis system. Several controlling factors affecting the operational efficiency of the suppression were investigated and optimized. The amount of suppressor tRNA and the concentration of $Mg^2+$ were crucial not only for the efficiency but also for the control of the exact suppression. In addition, some general optimization factor are reported in order to improve the efficiency in an unnatural amino acid mutagenesis.

외상성 요추 경막하 출혈 : MRI(Fat Suppression Technique)와 척추천자의 유용성 - 증례보고 - (Traumatic Spinal Subdural Hematoma : Value of MRI (Fat Suppression Technique) and Spinal Puncture - 2 Cases Report -)

  • 박상훈;현동근;박종운;하영수
    • Journal of Korean Neurosurgical Society
    • /
    • 제29권6호
    • /
    • pp.810-814
    • /
    • 2000
  • We report two cases of spinal subdural hematoma in the lumbar region after trauma. They developed in a 27-years old man and a 32-year-old woman. They had no other causes such as bleeding tendency, preexisting spinal lesions, lumbar puncture, vascular malformation and anticoagulant therapy. There lesions were diagnosed with MRI(fat suppression) and treated by lumbar puncture.

  • PDF

유연우주비행체의 선회 및 진동억제를 위한 Torque Shaping 기법에 관한 연구 (A study on torque shaping method for slewing and vibration suppression of flexible structures)

  • 문종윤;석진영;김유단
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
    • /
    • pp.1087-1090
    • /
    • 1996
  • The objective of this paper is to present a new input torque shaping method for slewing and vibration suppression of flexible structure based on Fourier series expansion. Vibration energy of the structure with shaped control input is investigated with respect to the shaping parameter of the reference torque, maneuver time and the number of trigonometric functions to be included in the series. Analytic expressions of the performance indices and their derivatives are derived in the modal coordinates. Numerical results show the effectiveness of the proposed approach to design the open-loop control law that modifies the shape of input torque for simultaneous slewing and vibration suppression.

  • PDF