• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.4
• /
• pp.551-557
• /
• 2017

Commanders want to receive quickly scientific and analytic results about the battlefield situation. Unfortunately, decision support system of Army Tactical Command Information System(ATCIS) is restricted to message procedures and searching function based on manual work. In this paper, we propose applying Data Mining to ATCIS for supporting rapid decision making based on the scientific and analytic method. The purpose of this proposal is to efficiently execute the tactical planning and employment of the subordinate units in order to achieve the mission.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.11
• /
• pp.140-148
• /
• 2004

Tight integration of product design and process planning in the early design stage would make bigger impact as wider spectrum of design and manufacturing alternatives can be pursued and evaluated. Thus the development of systematic computer-based supporting for this integration if desirable. For this integration and process planning in the early design stage, the systematic method to synthesize shape of part from functional requirements is crucial. This research presents the methods of functional decomposition from overall function of product and synthesizing shape of part based on functional relations extracted from functional decomposition using planetary gear transmission system as an example.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.784-789
• /
• 2000

Equations of motion are derived and solved using the finite element method substructure synthesis for the disk-spindle system with rigid spindle and flexible shaft. The disk is modeled as a flexible spinning disk by Kirchhoff plate theory and von Karman nonlinear strain. The spindle supporting the flexible disk is modeled as a rigid body to consider its complex geometry. The stationary shaft supporting the rotating disk-spindle-bearing system is modeled by Euler beam, and the ball bearings are modeled as the stiffness matrix with 5 degrees of freedom. Developed theory is applied to analyze the vibration characteristics of a 3.5" HDD and a 2.5" HDD, respectively, and modal tests are performed to verify the simulation results. This paper shows that the developed theory can be effectively applied to the rotating disk-spindle system with the spindle of complex shape.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.2
• /
• pp.85-93
• /
• 2010

This paper proposes a CAE data translation and visualization technique that can verify time-varying continuous analysis simulation in a virtual reality (VR) environment. In previous research, the use of CAE analysis data has been problematic because of the lack of any interactive simulation controls for visualizing continuous simulation data. Moreover, the research on post-processing methods for real-time verification of CAE analysis data has not been sufficient. We therefore propose a scene graph based visualization method and a post-processing method for supporting interoperability of continuous CAE analysis data. These methods can continuously visualize static analysis data independently of any timeline; it can also continuously visualize dynamic analysis data that varies in relation to the timeline. The visualization system for continuous simulation data, which includes a CAE middleware that interfaces with various formats of CAE analysis data as well as functions for visualizing continuous simulation data and operational functions, enables users to verify simulation results with more realistic scenes. We also use the system to do a performance evaluation with regard to the visualization of continuous simulation data.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.87-91
• /
• 2004

High aged society is rapidly progressing in Japan. The rate of aged person more than 65 years old in the population are estimated 25 % in 2017 and rate of younger population will be decreased at same time. As a result, it is estimated that the human resources that is looking after or supporting for the aged person will be drained in Japan. In the other hand, the society has to provide high quality of life in order to be improved living environment for aged person. To decrease the share of nursing and caring for the aged person, it is required that new supporting systems for aged person have to build up as soon as possible. But it is required that various kind of measurement for posture and movement in activities with a simple and single detector for the aged person. The measurement instrument has to be lightweight and simple structure. The results give us a simple measurement method are classified that the posture of sitting down, lying down in stationary statuses and walking, running and going to up and down on the stairs in moving statuses. The detected data will plane to transmit to wireless mobile system to the host computer.

• Geomechanics and Engineering
• /
• v.22 no.3
• /
• pp.265-275
• /
• 2020

As a flexible supporting structure, the anchoring frame structure is widely adopted to support multistage slopes in high earthquake-intensity area for its effectiveness and practicality. The previous study indicates that the anchor of anchoring frame structure is the most likely to be damaged during earthquakes. It is crucial to determine the pull-out capacity of anchor against seismic force for the seismic design of anchoring frame structure. In this study, an analytical model of a three-stage slope supported by anchoring frame structure is established, and the upper bound method of limit analysis is applied to deduce the seismic anchor force of anchoring frame structure. The pull-out capacity of anchor against seismic force of anchoring frame structure at each stage is obtained by computer programming. The proposed method is proved to be reasonable and effective compared with the existing published solution. Besides, the influence of main parameters on the pull-out capacity of anchor against seismic force is analyzed to provide some recommendations for the seismic design of anchoring frame structure.

• Structural Engineering and Mechanics
• /
• v.61 no.2
• /
• pp.255-266
• /
• 2017

In this study, self-supporting roofing elements especially convenient for large-span structures such as stadium, airport terminal, mall, coliseum, etc. were examined with respect to critical buckling load. These elements were assumed as laminated composite plates and, variation of free-edge forms, cutout types and lamination configurations were used as design parameters. Based on the architectural feature and structural requirements, the effects of curvilinear free-edge form on critical buckling load were focused on in this research. Within this scope, 14 types of lamination configuration were specified according to various orientation angle, number and thickness of plies with a constant value of total plate thickness. Besides that, 6 different types of cutout and 3 different free-edge forms were determined. By combining all these parameters 294 different critical buckling load analyses were performed by using ANSYS Mechanical software based on finite element method. Effects of those parameters on critical buckling load were evaluated referring to the obtained results. According to the results presented here, it may be concluded that lamination conditions have more significant influence on the critical buckling load values than the other parameters. On the other hand, it is perceived that curvilinear free-edge forms explicitly undergo changings depending on lamination conditions. For future work, existence of delamination might be considered and progression of the defect could be investigated by using non-linear analysis.

• The KIPS Transactions:PartD
• /
• v.12D no.3 s.99
• /
• pp.355-364
• /
• 2005

Previous researches on subsequence matching have been focused on how to make indexes in order to speed up the matching time, and do not take into account the effectiveness issues of subsequence matching methods. This paper considers the effectiveness of subsequence matching methods and proposes two metrics for effectiveness evaluations of subsequence matching algorithms. We have applied the proposed metrics to Korean stock data and five known matching algorithms. The analysis on the empirical data shows that two methods (i.e., the method supporting normalization, and the method supporting scaling and shifting) outperform the others in terms of the effectiveness of subsequence matching.

• The Journal of Information Technology and Database
• /
• v.8 no.1
• /
• pp.1-11
• /
• 2001

More and more cyber shopping malls, one of the new promising Internet businesses of today, are opening business everyday. And instead of the ordinary image and text type of product display, buyers can now view products from any viewpoint through 3D images and also get more detail information on the product more easily thanks to the new VP technology, visual tools, and statecharts. However the currently used virtual prototyping supporting method does not consist of any database support for sharing the data from different virtual prototype developments and reusing the data in developing other prototypes. And in cases of custom order products, there is no linkage with the virtual product database that enables buyers in cyberspace such as cybermalls to try out the products before purchasing. This paper is purported for being applied as the basis for planning the construction of a complete CRM method applied cyber shopping mall that can accommodata all the demands and requests from customers. And the database supporting VP framework that supports data sharing and collaboration between virtual prototype developers and manufacturing custom order products is suggested for this purpose.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.5
• /
• pp.693-705
• /
• 2013

Procedural models have the advantage of being easy to edit simply by changing the values of the parameters of their constructional operations. In previous studies, we have introduced an approach for representing procedural 2D CAD models in ISO 10303 and developed ISO 10303-112 for the exchange of procedural 2D CAD models. In this paper, a method for the development of a procedural 2D CAD data translator supporting ISO 10303-112 is suggested. Furthermore, the core techniques applied to the translator are presented. The feasibility of the proposed method was demonstrated through data exchange experiments using a prototype translator.