• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.99-106
• /
• 2007

The IACS Common Structural Rules are to be applied for double hull tanker of more than 150m length with contracted after 1 April 2006. The objectives of the rules are to make more robust, safer ship and to ensure transparency of the technical background. In compliance of CSR, we had carried out prescriptive rules scantling determination and 3-D hold FE analysis of AFRAMAX TANKER. Prescriptive rules scantling determines the minimum required scantling, hull-girder longitudinal bending and shear strength, hull girder ultimate strength, local strength of plate and stiffener, strength of primary supporting member and fatigue assessment of the longitudinal stiffener end connections to the transverse bulkhead. 3-D hold FE analysis assesses the structural adequacy of the vessel's primary hull structure and major supporting members using yielding and buckling failure modes. So we could verify the strength assessment of AFRAMAX TANKER applied CSR.

• 한국안전학회지
• /
• 제34권5호
• /
• pp.87-94
• /
• 2019

This study deals with the reliability analysis approach of the temporary structure that can consider the uncertainty in rotational stiffness at the joints of the members, for which the semi-rigid connections are modelled as rotational spring and its coefficient is treated as a random variable following uniform distribution. In addition, this study introduces a computational procedure of the effective length coefficient for more accurate buckling load according to connection conditions of the supporting members attached to the joint. From the results of this study, it can be seen that the failure probability of the joint-hinge model (Case 1) presented in the design standard is higher than that of the practical model (Case 5) considering the rotational stiffness at the joints. This implies that the design standard leads to a conservative design of the temporary structure. The results also confirmed that the failure probability of the vertical member, i.e., the most critical member, can be further reduced when the base connection is provided with a fixed end. The comparative results between FORM, SORM and MCS further demonstrated that FORM can have a high level of numerical efficiency while ensuring the accuracy of the solution, compared with SORM and MCS. Based on these results, the proposed approach can be used as an accurate and efficient reliability analysis method of the three dimensional temporary structure.

• 안보군사학연구
• /
• 통권15호
• /
• pp.57-86
• /
• 2018

The ROKAF has been training for a number of exercise for victory in the war, but the lack of aviation ammunition has become a big issue every year. However, due to the limitation of defense resources, there are many difficulties in securing and stockpiling ammunition for the war readiness. Therefore, there is a need to find a way to secure aviation ammunition for war readiness in a more economical way, so In this study, we analyze the precedent research case and the case of the reduction of the purchase cost of weapon system of other countries, and then I have suggested a plan that is appropriate for our situation. As a result of examining previous research cases for this study, there were data that KIDA studied in 2012, Precision-guided weapons acquisition cost reduction measures pursued by US Air Force And the use of procurement agencies that are being implemented by NATO member countries. Based on this study, the following four measures were proposed to reduce the purchase cost of aviation ammunition. First, the mutual aid support agreement was developed to sign the ammunition joint operation agreement. Second, join the NATO Support & Procurement Agency (NSPA) Third, it builds a purchasing community centered on the countries operating the same ammunition Fourth, participating in the US Air Force's new purchase plan for ammunition and purchase it jointly. The main contents of these four measures are as follows. 1. the mutual aid support agreement was developed to sign the ammunition joint operation agreement. Korea has signed agreements on mutual logistics support with 14 countries including the United States, Israel, Indonesia, Singapore, Australia, and Taiwan. The main purpose of these agreements is mutual support of munitions and materials, also supporting the training of the peace time and promoting exchange and cooperation. However, it is expected that there will be many difficulties in requesting or supporting mutual support in actual situation because the target or scope of mutual aid of ammunition is not clearly specified. Thus, a separate agreement on the mutual co-operation of more specific and expanded concepts of aviation ammunition is needed based on the current mutual aid support agreements 2. join the NATO Support & Procurement Agency (NSPA) In the case of NATO, there is a system in which member countries purchase munitions at a low cost using munitions purchase agencies. It is the NATO Purchasing Agency (NSPA) whose mission is to receive the purchasing requirements of the Member Nations and to purchase them quickly and efficiently and effectively to the Member Nations. NSPA's business includes the Ammunition Support Partnership (ASP), which provides ammunition purchase and disarming services. Although Korea is not a member of NATO, NSPA is gradually expanding the scope of joint procurement of munitions, and it is expected that Korea will be able to join as a member. 3. it builds a purchasing community centered on the countries operating the same ammunition By benchmarking the NSPA system, this study suggested ways to build a purchasing community with countries such as Southeast Asia, Australia, and the Middle East. First, it is necessary to review prospectively how to purchase ammunition by constructing ammunition purchasing community centered on countries using same kind of ammunition. 4. participating in the US Air Force's new purchase plan for ammunition When developing or purchasing weapons systems, joint participation by several countries can reduce acquisition costs. Therefore, if the US Air Force is planning to acquire aviation ammunition by applying it to the purchase of aviation ammunition, we will be able to significantly reduce the purchase cost by participating in this plan. Finally, there are some limitations to the method presented in this study, but starting from this study, I hope that the research on these methods will be actively pursued in the future.

• 컴퓨터교육학회논문지
• /
• 제5권3호
• /
• pp.11-18
• /
• 2002

인터넷에 존재하는 많은 전자상거래 사이트의 데이터베이스에 중복적으로 저장되어 있는 개인정보의 무결성을 유지하며, 사용자의 불편함을 줄이고, 각 사이트의 독립된 S/W를 충족시킬 수 있는 통합형 데이터베이스 개발은 매우 중요하다고 할 수 있다. 이에 본 논문에서는 이기종 분산 데이터베이스로 구성된 각 사이트의 회원관리 시스템이 가지고 있는 단점을 살펴보고, 효율적인 회원 관리를 할 수 있는 개인정보관리 시스템 모델을 설계하였으며, 이를 이용하여 IPIMS라는 통합된 개인정보 관리 시스템을 구현하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.562-566
• /
• 2006

Lightweight body can cause a low stiffness due to the decrease of panel thickness and reinforcing member. The other way, high stiffness body demands an increase of mass. Front pillar section area is decreased due to driver's visual field. Global vehicle stiffness is affected by stiffness distribution ratio between upper part and lower part at side body structure. This paper will describe a process used to evaluate the stiffness distribution ratio based on research of strain energy analysis of the tip rotation method. In addition, optimum design schemes are presented for high stiffness and lightweight body structure considering the investigated stiffness distribution ratio. In this way the designer will be aided by a defined design guide and a set of supporting tool to help him work towards a good design

• 한국정보시스템학회지:정보시스템연구
• /
• 제13권2호
• /
• pp.135-153
• /
• 2004

The formation of a supply chain should be approached with distributive viewpoint considering the dynamic nature of ordering environments. The purpose of this paper is to design a semantic web to support agent negotiation forming supply chains. With the view of a supply chain as composed of competitive agents which represent each member of supply chains with a local goal, a supply chain is formed through negotiation of price, due date choosing partners to contract. In the development of a negotiation method, we employ ontology and rules which are the basic techniques of the semantic web for supporting automated negotiations. Especially, a framework for a negotiation process is suggested and domain, processes and rules ontology are designed interrelatedly. With this modeling, a possibility of the semantic web based agent negotiation is suggested.

• 건축역사연구
• /
• 제26권2호
• /
• pp.7-14
• /
• 2017

Rafter is a member for roof and plays a role in protecting shaft members under rafter such as pillar, beam and girder from natural environment and to fix by supporting finished materials of roof. It is common in the Korean architecture that rafter cross-section is paired with circular form and Buyeon cross-section is paired with the square shape. However, while there are not many, some architectures have rafter end header in the square shape. The aim of this study is to examine the square shape cases of rafter end header with special reference to stone structure. As a result, among stone structure related to Bangyeon, the majority case is seen at Palgakwondang type Seungtap. It was shown in the Seungtap of monk of Gusanseonmun school in the later Unified Silla to the early Goryeo period that succeeded Seodang Jijang.

• 농촌지도와개발
• /
• 제16권1호
• /
• pp.51-67
• /
• 2009

This study was carried out to investigate the major factors of the successful development of Doi Chaang Coffee Complex, Chiang Rai of Thailand. Data were gathered through field survey, library research and internet so on. Interviews were conducted with specialist, community leaders, board member of Doi Chaang Coffee Company from 14 to 19, January 2007. The major factors for the successful development observed were as follows: 1) Successful selection of crops and farming system(SALT) with regards of slopes and meteorological condition; 2) Leadership of the King of Thailand and the chief of Akha in terms of attitudinal change of hill-tribes in agriculture extension; 3) supporting by Royal Project Foundation; 4) Quality control through post harvest management by cooperative system; 5) Cooperation between the Coffee Producers' Cooperatives of Thailand and for the international Doi Chaang Coffee Corporation of Canada in terms of fair trade and so on.

• 건축역사연구
• /
• 제21권2호
• /
• pp.21-36
• /
• 2012

As wooden construction developed, it was observed that the rafters with corners changed to angled rafters. The change from rafters to angle rafters means that the angle rafters became the most important member in supporting the roof weight as the construction scale increased and structurally developed. The specific installation methods of angle rafters were all unique in Korea, China, and Japan. In East Asia, the angle of the angle rafter gradually decreased along with the development of construction. However, in Joseon Dynasty Korea, the angle of the angle rafter was larger than that of the Gorye era because the method of fixing the corner of the roof more firmly by building the fan-shaped rafter was utilized. The changes to the angle rafter installation method is a unique characteristic of Korea, in that it was developed in a totally different way from the methods used in China and Japan.

• 디지털산업정보학회논문지
• /
• 제10권3호
• /
• pp.61-70
• /
• 2014

The government supports the various systems on the premise of life-long education for improving the qualification of its people and supporting the lifelong career system. These systems help the educational activities for every generation from the teens. Each government department supports the learning activities for those who are related. In addition, each government department systemizes the regular education for advancing the performance of civil servant, by obliging a self-directed system to their member as well as by reflecting this educational activities in a promotion. This style of learning is provided not only offline but also online. However, not all necessary educational contents is furnished within the department. It is sometimes necessary to cooperate with the commissioned education and a professional educational institution. This thesis suggests three model systems while comparing one another. This paper suggests three system model. The first model is e-contents open place. The second model is e-contents open place. Finally, the suggest model is mixed form.