• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.601-607
• /
• 2003

The column type is used as the sensing element of the load cell to measure the large force in the range of 10$^4$~ 10$^{7}$ N. However. it is not easy to handle the load with large capacity due to its size. It is, therefore, necessary to design a compact load cell with a low aspect ratio. Thus this paper showed the characteristic evaluation of compact load cell with respect to the shape of supporting plate. The supporting plate of the load cell was an annular type with inner(D$_{i}$) and outer(D$_{o}$) diameters. Using the strain distribution obtained from FEM. the supporting plate was designed to get the stable output voltage of the load cell. The three designed supporting plates were manufactured, and the result of characteristic experiment of the load cell, using the 10 MN hydraulic force standard machine, was compared with FEM.M.M.

• Applied Microscopy
• /
• v.29 no.4
• /
• pp.417-426
• /
• 1999

The present investigation is designed to provide basic information on fine structure of the skin of the sea bass, Lateolabrax japonicks in relation to study of epidermal change with environmental and physiological change. The skin of the sea bass is divided into the epidermal layer and dermal layer. Epidermal layer consists of supporting cells and unicellular glands. The supporting cells were classified into the superficial cell, intermediated cell and basal cell. Gland cells were classified into the mucous secretory cell and club cell which is more frequently observed. Superficial cell of epidermal layer is squamous or cuboidal and contains well-developed rough endoplasmic reticulum and the surface is covered with numerous microridges. Superficial cells are connected to another cell with membrane interdigitations and desmosomes. Intermediated cell is ovoid and the electron density is higher than the other supporting cells. Basal cell is cuboidal and has a well-developed mitochondria and membrane interdigitation. The mucous secretory cell has a numerous membrane bounded secretory granules. The cytoplasm of club cell is divided into cortex and medullar. The medullar cytoplasm has a nucleus, intracellular organelles and central vacuole, and the cortical cytoplasm has a well-developed tonofilament. Club cells are connected to another cell with well -developed membrane interdigitations and desmosomes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.2
• /
• pp.148-152
• /
• 2000

To provide basic information on the integumentary system of the blenny, Pholis nebulosa, ultrastructures of epidermal and dermal layer were examined by means of the light and transmission electron microscope. The skin of the blenny consisted of epidermal and dermal layer. Epidermal layer consisted of supporting cell and unicellular gland. The supporting cells were classified into superficial cell, intermediated cell and basal cell, and the gland cells were classified into mucous secretory cell and club cell. The cytoplasm of supporting cells was divided into cortex and medullar part. In the cortex and medullar part, microfilaments and cell organelles were well developed, respectively. Superficial cell of epidermal layer was cuboidal and contained nucleus of horseshoe shape. Intermediated cell had a nucleus of irregular form and the electron density was higher than the other supporting cells, Basal cell was columnar, but nucleus was situated in the upper cytoplasm. Cell organelles of the basal cell were poor than the other supporting cells, but membrane interdigitations were well developed. The cytoplasm of mucous secretory cell had a well-developed ovoid secretory granules, which reacted to red with AB-PAS reaction. The club cell had a we31-developed round secretory granules and endoplasmic reticulum. figment cells were classified into two type. The one contained pigment granules of electron dense, and the other contained reflecting platelets. The cytoplasm of fibrocyte had n well developed rough endoplasmic reticulum.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.3
• /
• pp.59-64
• /
• 2018

In recent years, the solar cell market has steadily grown with the demand for new energies. And wire sawing is one of the most critical processes in manufacturing solar cell wafer which is supposed to affect the breakage of wafers most during the process and afterwards. Generally, the defects of the wafers are generated from the structural vibrations of the machine. In the sawing process, the vibrations cause unnecessary normal stress on the cut surface of wafers, and eventually create the surface damage or leave the residual stress. In this study, the dynamic properties of a wire saw have been analyzed through the frequency response test and the computer simulation. And the effects of the design alterations have been investigated to stabilize the machine structure and further to reduce the vibrations. The result shows that relatively simple design alterations of supporting structure without any change of major parts of the machine can suppress the vibrations of the machine effectively.

• Applied Microscopy
• /
• v.32 no.2
• /
• pp.121-129
• /
• 2002

The structure of integumentary epidermis is studied in the bastard halibut, Paralichthys olivaceus based on the light and transmission electron microscope. Epidermal layer consists of supporting cells, unicellular glands and accessory cells. The supporting cells were classified into superficial cell, intermediated cell and basal cell. Superficial cell of epidermal layer is squamous or cuboidal and the surface is covered with numerous microridges. The supporting cells are connected to another cell with membrane interdigitations and desmosmes. And tonofilaments are developed in the cortical cytoplasm. Gland cells are classified into mucous cell and club cell. By the histochemical studies of the epidermal secretions the mucous materials are identified as neutral polysaccharides. Club cell has numerous vacuoles and microfilaments in the cytoplasm. Also chloride cells are observed in the epidermis, it cytoplasm is occupied numerous mitochondria.

• Journal of the Korean institute of surface engineering
• /
• v.31 no.1
• /
• pp.24-33
• /
• 1998

Effects of pH and supporting salts on the characteristics of electrogalvanzied coating in sulfate bath are investigated. The fine grain size is obtained and the whiteness with the amount of supporting salts or pH increased at more than current density of 100A/$dm^2$<\TEX>, With supporting salts increased, the electro-conductivity of the bulk solution increases and the cell voltage decreases, while the width of the cathode burned edge gets wider because it seems that the increased overpotential the vicinity of cathode causes the decreases, of limiting current density. When the amount of supporting salts or pH of sulfate bath decreases, the zinc crystals have preferred orientation (001) planes. However when the amount of supporting salts or pH increase, the crystal texture has less (001) planes and gets to have random crystal planes.

• Applied Microscopy
• /
• v.30 no.3
• /
• pp.303-310
• /
• 2000

Ultrastructures on the integumentary epidermis of the marbled sole, Limanda yokahamae, were examined by means of the light and transmission electron microscope. Epidermal layer consists of supporting cells, unicellular glands and accessory cells. The supporting cells were classified into superficial cell, intermediated cell and basal cell. The cytoplasm of supporting cells is divided into cortex and medullar part. In the cortex and medullar part, microfilaments and cell organelles are well developed, respectively. Gland cells are present in the superficial and middle epidermis. The cytoplasm of mucous cell reacted to blue in AB-PAS (pH 2.5). Club cell has a roundish central vacuole and well-developed microfilaments in the cytoplasm. Granular cells are occurs in the middle and basal epidermis , and the cytoplasm is occupied with membrane-bounded granules of electron dense. Chloride cells are present in the superficial epidermis , and the cytoplasm is occupied with tubular mitochondria. Three types of pigment cells can be distinguished by electron density of cytoplasmic inclusions.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.4
• /
• pp.611-615
• /
• 2008

Novel groups of uncultivable anaerobic thermophiles were isolated from compost by enrichment cultivation in medium with a cell-free extract of Geobacillus toebii. The cell-free extract of G. toebii provided the medium with growth-supporting factors (GSF) needed to cultivate the previously uncultured microorganisms. Twenty-nine GSF-requiring candidates were successfully cultivated, and 16 isolated novel bacterial strains were classified into three different groups of uncultivable bacteria. The similarity among these 16 isolates and a phylogenetic analysis using 16S rRNA gene sequences revealed that these GSF-requiring strains represented novel groups within the family Clostridiaceae.

• Applied Microscopy
• /
• v.32 no.1
• /
• pp.17-30
• /
• 2002

The retinae of Todarodes pacificus and Octopus minor are divided into four layers that are an outer segment, a rod base region, an inner segment, and a plexiform layer, respectively. The retina of Octopus minor is about $20{\mu}m$ thicker ($400{\sim}420{\mu}m$) than that of Todarodes pacificus ($385{\sim}400{\mu}m$). A retina is composed of visual cells and supporting cells. The microvilli of length $0.6{\sim}0.7{\mu}m$ are packed densely on top of the supporting cells of Octopus minor while they are not found in Todarodes pacificus. The visual cells and supporting cells have pigment granules that exclude light. In case of Todarodes pacificus, the pigment granules of the visual cell are larger ($2.0{\times}0.5{\mu}m$) than those of the supporting cell ($1.0{\times}0.3{\mu}m$). But, the sizes of both cells are similar in Octopus minor. In the upper portion of a visual cell, microvilli shaped like a comb are forming a rhabdome (diameter, 60 nm) of a hexagonal structure. The rhabdome consists of 4 rhabdomere and the total area of a rhabdom of Octopus minor is larger than that of Todarodes pacificus. The synaptosome constructing a plexiform layer in Todarodes pacificus are divided into two types, each of which possess electron dense-core vesicles and electron lucent vesicles, respectively. Octopus minor also has two types of synaptosomes but each type comprises a mixture of electron dense vesicles and electron lucent vesicles, and electron lucent vesicles only, respectively, which is different from the case of Todarodes pacificus.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.199-208
• /
• 1994

This paper proposes a delay fault test technique for ICs and PCBs with the boundary-scan architectures supporting ANSI/IEEE Std 1149.1-1990. The hybrid delay fault model, which comprises both of gate delay faults and path delay faults, is selected. We developed a procedure for testing delay faults in the circuits with typical boundary scan cells supporting the standard. Analyzing it,we concluded that it is impractical because the test clock must be 2.5 times faster than the system clock with the cell architect-ures following up the state transition of the TAP controller and test instruction set. We modified the boundary-scan cell and developed test instructions and the test procedure. The modified cell and the procedure need test clock two times slower than the system clock and support the ANSI/IEEE standard perfectly. A 4-bit ALU is selected for the circuits under test. and delay tests are simulated by the SILOS simulator. The simulation results ascertain the accurate operation and effectiveeness of the modified mechanism.