• Journal of the Korea Safety Management & Science
• /
• v.9 no.5
• /
• pp.135-145
• /
• 2007

In this study, as the result of analyzing the relationship and influence between economic outcome and R&D supporting investment, the number of supporting subjects among the technological innovational areas of SMEs, it is as below. First, as the economic result of analyzing companies from the investment in R&D of technological innovational areas of minor companies, the number of supporting subjects and amount of R&D have relationship with increase of sales and export amount, employee reduction & the effect of new job creation shows positive correlation with the effect of import replacement. Second, as analyzing the influence of the investment in R&D has economic effect from of technological innovational minor companies. This is thought that the financial and R&D support increase a significant effect on economical, technical against SMEs.

• Journal of the Korean institute of surface engineering
• /
• v.31 no.1
• /
• pp.24-33
• /
• 1998

Effects of pH and supporting salts on the characteristics of electrogalvanzied coating in sulfate bath are investigated. The fine grain size is obtained and the whiteness with the amount of supporting salts or pH increased at more than current density of 100A/$dm^2$<\TEX>, With supporting salts increased, the electro-conductivity of the bulk solution increases and the cell voltage decreases, while the width of the cathode burned edge gets wider because it seems that the increased overpotential the vicinity of cathode causes the decreases, of limiting current density. When the amount of supporting salts or pH of sulfate bath decreases, the zinc crystals have preferred orientation (001) planes. However when the amount of supporting salts or pH increase, the crystal texture has less (001) planes and gets to have random crystal planes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.142-145
• /
• 1999

We confirm that when A-type zeolite supporting silver lone is placed in ion-exchanged distilled water, silver ions is eluted and eluted silver ions generates hydroxyl-radical (.OH) and hydro-radical (.H) continuously, the amount of those is proportion to the silver-ion concentration. Hydroxyl-radical is not generated by super-oxide anion-radical (.O2) but by directly dissolved water. To know such a above discussed mechanism, we prepare A-type zeolite supporting silver ions, and measure the amount of the eluted silver tons by atomic absorption spectroscopy and the generated radical by ESR The radical generated by A-type zeolite supporting silver ions is discussed in the application of elecrical and electronic materials.

• 한국벤처창업학회:학술대회논문집
• /
• 2007.04a
• /
• pp.101-122
• /
• 2007

In this study, as the result of analyzing the relationship and influence between economic outcome and R&D supporting investment, the number of supporting subjects among the technological innovational areas of SMEs, it is as below. First, as the economic result of analyzing companies from the investment in R&D of technological innovational areas of minor companies, the number of supporting subjects and amount of R&D have relationship with increase of sales and export amount, employee reduction & the effect of new job creation shows positive correlation with the effect of import replacement. Second, as analyzing the influence of the investment in R&D has economic effect from of technological innovational minor companies. This is thought that the financial and R&D support increase a significant effect on economical, technical against SMEs.

• The Journal of Fisheries Business Administration
• /
• v.47 no.3
• /
• pp.53-69
• /
• 2016

The purpose of this study is to explore the ecosystem service and benefit indicators of natural seaweed beds. Ecosystems of natural seaweed beds provide a wide range of services and benefits to human society including provisioning services, regulating services, supporting services, and cultural services. Indicators for each of the ecosystem services are chosen by marine plants ecologists and as follows. Ecosystem indicators of natural seaweed beds for provisioning services are well-being food(amount of seaweed harvested/amount of fish landed, fish biomass, area of natural seaweed beds, the number of species, contribution to the second production), raw materials(amount of biomass by breed, amount of aquaculture feed), genetic resources(amount of genetic material extracted, amount of genetic material contained by age and habitat), and medicinal resources(amount of medicinal material extracted). Ecosystem indicators of natural seaweed beds for regulating services are air purification(amount of fine dust/NOx or $SO_2$ captured), climate regulation(amount of $CO_2$ sequestered), waste treatment(amount of N, P stored, biochemical degradation capacity COD), and costal erosion prevention(length and change of natural coast line, amount of sediment prevented). Ecosystem indicators of natural seaweed beds for supporting services are lifecycle and maintenance(primary production, contribution to the second production) and gene pool protection(amount of compositional factors in ecosystem, introduced species). Ecosystem indicators of natural seaweed beds for cultural services are recreation and tourism(the number of visits of an area) and information for cognitive development(amount of time spent in education, research and individual learning about ecosystem of natural seaweed beds).

• Tribology and Lubricants
• /
• v.30 no.4
• /
• pp.199-204
• /
• 2014

Various heat-treated and surface coating methods are used to mitigate abrasion in sliding machine parts. The most cost effective of these methods involves hard coatings such as diamond-like carbon (DLC). DLC has various advantages, including a high level of hardness, low coefficient of friction, and low wear rate. In practice, a supporting layer is generally inserted between the DLC layer and the steel substrate to improve the load carrying capacity. In this study, an indentation and sliding contact problem involving a small, hard, spherical particle and a DLC-coated steel surface is modeled and analyzed using a nonlinear finite element code, MARC, to investigate the influence of the supporting layer thickness on the coating characteristics and the related coating failure mechanisms. The results show that the amount of plastic deformation and the maximum principal stress decrease with an increase in the supporting layer thickness. However, the probability of the high tensile stress within the coating layer causing a crack is greatly increased. Therefore, in the case of DLC coating with a supporting layer, fatigue wear can be another important cause of coating layer failure, together with the generally well-known abrasive wear.

• Journal of KIISE:Information Networking
• /
• v.33 no.1
• /
• pp.28-37
• /
• 2006

Recently, transport layer mobility supporting approaches based on SCTP, which is a new standard transport layer protocol, are proposed. In this paper, the handover performance and overheads of these transport layer mobility supporting approaches are compared to those of the traditional network layer mobility supporting approaches. Through the simulation results, it is shown that the handover performance of the transport layer mobility supporting approaches is better or at least similar to that of the plain MIPv6, which is the representative network layer mobility supporting approach. With respect to the amount of control packet, the transport layer approaches impose less overhead than any of the network layer approaches.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.150-165
• /
• 1998

For the purpose of evaluating the effect of both direct retainer design and bony absorption degree around abutment of indirect retainer on the supporting tissue of abutment of indirect retainer, dislodging force was transmitted to unilateral distal extension RPD bases. Analysis of stress distributed within the supporting tissue around abutment of indirect retainer was carried out. Using three-dimensional photoelastic stress analysis method and the conclusion is a follows. 1. According to the extent of force which the direct retainer of the most distal abutment tooth, the amount of force transmitted to the abutment tooth of indirect retainer was small. 2. Of all the cases, Mandibular first premolar which was used abutment tooth of indirect retainer, buccal, mesial and distal sides represented compression stress and lingual side represented tensile stress. 3. The more bone resorption of abutment tooth of indirect retainer, the more distortion of buccal and distal side of abutment tooth was existed and the extent of compression stress which was existed and distal side to abutment tooth was large. 4. When the alveolar bone around the abutment with indircet retainer is normal. The amount of force transmitted on abutment with indirect retainer was small in the order of Akers clasp, RPA clasp, RPI clasp. 5. When the alveolar bone around the abutment with indirect retainer has been absorbed 20% and 30%, the amount of force transmitted on abutment with indirect retainer was small in the order of RPA calsp, RPI clasp, Akers clasp. 6. When denture is displaced, shape of the direct retainer reciprocating abutment affect much the function of indirect retainer.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.425-432
• /
• 2021

In this paper, We produced supporting for ginseng cultivation facilities as a material recycling product of CPW(Complex Plastic Wastes, CPW) from households. And we analyzed the characteristics of material recycling products according to the amount of r-LDPE(Recycled low density polyethylene, r-LDPE) used. As a result, as the amount of recycled LDPE used increa sed, the tensile strength a nd elonga tion of ma teria l recycled products using CPW increa sed, but a sh decrea sed. When the recycled r-LDPE usage is 5% or more, the physical properties of the material recycling product using CPW stably satisfy the quality standard (GRM 3093-2021) of supporting for ginseng cultivation facilities.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.11
• /
• pp.1183-1191
• /
• 2001

The metallorganic chemical vapor deposition (MOCVD) method has been used to prepare TiO2 thin films for the degradation of hazardous organic compounds, such as 2-chlorophenol (2-CP). The effect of supporting materials and metal doping on the photocatalytic activity of TiO2 thin films also has been studied. TiO2 thin films were coated onto various supporting materials, including stainless steel cloth(SS), quartz glass tube (QGT), and silica gel (SG). Transition metals, such as Pd(II), Pt(IV), Nd(III) and Fe(III), were doped onto TiO2 thin film. The results indicate that Nd(Ⅲ) doping improves the photodegradation of 2-CP. Among all supporting materials studied, SS(37 ${\mu}m)$ appears to be the best support. An optimal amount of doping material at 1.0 percent (w/w) of TiO2-substrate thin film gives the best photodegration of 2-CP.