• Journal of Advanced Marine Engineering and Technology
• /
• 제31권4호
• /
• pp.363-369
• /
• 2007

Probably the most significant heat transfer in the cryogenic liquid hydrogen storage tank from the atmosphere may occur through its support system. In this paper the efficient support system for the cryogenic storage vessel was newly developed and analysed. The support system was composed of a spherical ball as a supporter to reduce the contact area. which is located between two supporting SUS tubes inserted SUS and PTFE blocks. Numerical analyses for temperature distribution, and the thermal stress and strain of the support system were performed by the commercial codes FLUENT and ANSYS. The heat transfer rate of the supporter was evaluated by the thermal boundary potential method which can consider the variation of thermal conductivity with temperature. The results showed that the heat transfer rate through the developed supporter compared with the common SUS tube supporter was significantly reduced. The thermal stress and strain were obtained well below the limited values. It was found that the developed supporter can be one of the most efficient support systems for cryogenic liquid storage vessel.

• 대한전자공학회논문지
• /
• 제4권2호
• /
• pp.29-34
• /
• 1967

도전성지주가 '안테나'의 방사에 주는 영향을 고찰하기 위하여 Dipole '안테나'를 도전성지주에 매우 가까히 놓고 여진하였을 경우의 전류의 분포를 해석 및 실측하였으며 양자가 잘 일치함을 확인하였다.

• 한국콘텐츠학회논문지
• /
• 제11권4호
• /
• pp.485-496
• /
• 2011

본 연구는 건강가정 문화사업 담당 건강가정사의 주요 직무를 분석하고 핵심역량과 역량개발영역을 파악하고자 일정 경력 이상의 대상자를 조사한 것이다. 그 결과 문화사업 담당 건강가정사가 인지하는 주요직무 1순위는 프로그램 기획과 가족자원봉사 프로그램 기획으로 거론되었으며, 핵심역량은 의식주 생활문화와 여가문화의 이해, 대인관계 및 사회성 향상 기술, 창의적이고 독창적인 사고능력, 전문가다운 문제해결 태도로 나타났다. 개발하여야 하는 역량 영역으로는 프로그램 기획과 평가, 보고서 및 평가서 등의 서류 작성 기술, 창의적이고 독창적인 사고능력, 전문가다운 문제해결 능력인 것으로 나타나 현장에 투입되어야 하는 관련 분야 종사자들의 필수 이수교과목들과 종사자 보수교육 주제에 시사점을 제공하고 있다.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.496-499
• /
• 2015

The objective of the study is to develop selfie sticks to enhance portability and prevent error of pushing mobile phone button. The main target of selfie sticks is women and the size of selfie sticks is too big to put it in their bag. Also when people put mobile phone in a selfie stick, people push its button easily. Sometimes mobile phone is turned off or the volume is controlled because of pushing its button. The researcher focused on designing a solution that enhances portability and preventing error of pushing the button. The researcher understood structure of selfie stick. It consists of a mobile phone supporter and a length adjuster. The researcher designed the mobile phone supporter for enhancing portability and the length adjuster for preventing to push the mobile phone. The researcher designed a part which connects a mobile phone supporter with a length adjuster and made selfie stick fold. Also, sponges are partly put on the mobile supporter. It can reduce situation of pushing the mobile phone button. The selfie stick design from the study has an opportunity to distinguish using the product and carrying it and have people use the selfie stick conveniently.

• 패션비즈니스
• /
• 제25권1호
• /
• pp.39-50
• /
• 2021

The purpose of this study was to investigate how wearing calf support and applying of electronic muscle simulation(EMS) affected the ability to balance. In this study, the one leg standing test for static balance and the Y balance test for dynamic balance were used to assess balance. At this time, the pressure of the calf support was different to produce two supporters, and a difference between wearing the support before, after, and after applying EMS was evaluated. Seven men in their 20s with healthy bodies were measured five times each with a five-minute break, taking into account muscle fatigue, and the difference between each variable was analyzed through a follow-up test using nonparametric statistical analysis. Studies have shown more difference from supporter B with a more appropriate pressure (mmgh) for increasing balance capability than from supporter A. In addition, it was confirmed that the use of EMS electrostimulation and support before measuring the balance capability resulted in a greater difference. The proper pressure (mmgh) supporters and EMS can increase the ability to balance, and these results can be expected to improve the balance ability of ordinary people in their daily lives.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.357-362
• /
• 2006

쐐기형 레일클램프는 초기에는 작은 압착력으로 레일을 압착하다가 바람이 불면 쐐기작용에 의해 큰 압착력으로 레일을 압착하는 구조를 가지고 있다. 이 때 쐐기작용을 위해 레일클램프는 레일을 따라 이동하게 되는데, 만약 지지대를 설치하지 않으면 밀림거리가 증가하여 구조물을 파괴에 이르게 하는 과부하가 발생하게 되므로 이를 방지하기 위한 지지대를 적절히 설치하여야 한다. 이러한 지지대의 적정위치는 초기압착력과 쐐기각에 따라서 결정되므로, 본 연구에서는 이러한 초기압착력과 지지대의 적정위치사이의 관계에 대하여 살펴보기 위하여 5가지 쐐기각을 설계변수로 하여 유한요소해석을 수행하였다.

• 한국항해항만학회지
• /
• 제31권1호
• /
• pp.65-70
• /
• 2007

쐐기형 레일클램프는 초기에는 작은 압착력으로 레일을 압착하다가 바람이 불면 쐐기작용에 의해 큰 압착력으로 레일을 압착하는 구조를 가지고 있다. 이 때쐐기작용을 위해 레일클램프는 레일을 따라 이동하게 되는데, 만약 지지대를 설치하지 않으면 밀림거리가 증가하여 구조물을 파괴에 이르게 하는 과부하가 발생하게 되므로 이를 방지하기 위한 지지대를 적절히 설치하여야 한다. 이러한 지지대의 적정위치는 초기압착력과 쐐기각에 따라서 결정되므로, 본 연구에서는 이러한 초기압착력과 지지대의 위치사이의 관계에 대하여 살펴보기 위하여 5가지 쐐기각을 설계변수로 하여 유한요소해석을 수행하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1446-1449
• /
• 2003

In this study we analyze operation principle of wedge type rail clamp using in the harbor and when wind force applies to container crane, we calculate deformation in each part of rail clamp. As a result of calculation, we will design rail clamp supporter that forbid overload to be applied at rail clamp according to adjust climbing wedge distance of roller. It would be adapted various container capacity and wind velocity.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.663-666
• /
• 2002

Hard disk drived (HDD) in computer are used extensively as data storage capacity. The trend in the computer industry to produce smaller disk drives rotating at higher speeds requires an improved understanding of fluid motion in the space between disks. The distribution of pressure disturbance on disks has relation to flow structure. To investigate the flow structure, time-resolved hot-wire measurements of the circumferential velocity component were obtained for the flow between the center pair of four disks of common radius $R_2$ coretating at angular velocity ${\Omega}$ in a fixed cylindrical enclosure. Hot-wire supporter acts as an obstruction in this case. The effects of rotating speed and size of hot-wire supporter diameter between disks on the flow driven by disks were investigated. Velocity spectra at the fixed space were measured to obtain the structure of inner and outer region in flow field.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.948-954
• /
• 2008

In this study, vibrational characteristics of two nano-imprinting stages is analyzed and compared with respect to the methodology to support the upper-plate of the stage. The first type of the stage has three supporters at each corners of the stage and one thrust bearing at the center of the stage. The other type of the stage has four supporter in each corner of the stage without a thrust bearing. The FEM software with flexible modeling is used for the normal mode analysis. The result depicts the difference of vibrational characteristics caused by the difference of support methods. The design criteria for the precision nano-imprinting stage is also discussed.