• Journal of Communications and Networks
• /
• v.14 no.1
• /
• pp.63-74
• /
• 2012

Multicast data communication is an efficient communication scheme, especially inmulti-hop ad hoc networks where the media access control (MAC) layer is based on one-hop broadcast from one source to multiple receivers. Compared to unicast, multicast over a wireless channel should be able to deal with varying channel conditions of multiple users and user mobility to provide good quality to all users. IEEE 802.11 does not support reliable multicast owing to its inability to exchange request-to-send/clear-to-send and acknowledgement packets with multiple recipients. Thus, several MAC layer protocols have been proposed to provide reliable multicast. However, additional overhead is introduced, as a result, which degrades the system performance. In this paper, we propose an efficient wireless multicast MAC protocol with small control overhead required for reliable multicast in multi-hop wireless ad hoc networks. We present analytical formulations of the system throughput and delay associated with the overhead.

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.315-319
• /
• 2015

Yttria-stabilized zirconia (YSZ)-based micro tubular SOFC single cells were fabricated by electrophoretic deposition (EPD) process. Stable slurries for the EPD process were prepared by adding phosphate ester (PE) as a dispersant in order to control the pH, conductivity, and zeta-potential. NiO-YSZ anode support, NiO-YSZ anode functional layer (AFL), and YSZ electrolyte were consecutively deposited on a graphite rod using the EPD process; materials were then co-sintered at $1400^{\circ}C$ for 4 h. The thickness of the deposited layer increased with increasing of the applied voltage and the deposition time. A YSZ-based micro tubular single cell fabricated by the EPD process exhibited a maximum power density of $0.3W/cm^2$ at $750^{\circ}C$.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1052-1070
• /
• 2017

For the autoencoder (AE) implemented as a construction component, this paper uses the method of greedy layer-by-layer pre-training without supervision to construct the stacked autoencoder (SAE) to extract the abstract features of the original input data, which is regarded as the input of the logistic regression (LR) model, after which the click-through rate (CTR) of the user to the advertisement under the contextual environment can be obtained. These experiments show that, compared with the usual logistic regression model and support vector regression model used in the field of predicting the advertising CTR in the industry, the SAE-LR model has a relatively large promotion in the AUC value. Based on the improvement of accuracy of advertising CTR prediction, the enterprises can accurately understand and have cognition for the needs of their customers, which promotes the multi-path development with high efficiency and low cost under the condition of internet finance.

• International Journal of Computer Science & Network Security
• /
• v.21 no.1
• /
• pp.152-161
• /
• 2021

The paper focuses on Device-to-device (D2D) Architectures evaluation frameworks. D2D communication and discovery can improve spectrum usage efficiency and optimize the tradeoffs between throughput and energy consumption. The target operation modes involve both indirect communication between two nodes via a base station or the direct communication among proximal nodes, enabling use cases that can support communications out of cellular coverage, as well as low end-end delay requirements. The paper will present the architectural evolution of D2D networks within 3GPP standardization and will highlight key network functionalities and signaling protocols. It will also identify key analytical and simulation models that can be used to assess the performance and energy efficiency of resource allocation strategies, and it will present a suitable cross-layer integrated framework.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.2
• /
• pp.76-78
• /
• 2002

We have carried out the first-principle electronic structure calculations to investigate the spacer layer formation of Fe/Si multilayered films (MLF) and compared with the results obtained by optical spectroscopy. The computer-simulated spectra based on various structural models of MLF showed that neither FeSi$_2$ nor B2O-phase FeSi, which are semiconducting, could be considered as the spacer layers in the Fe/Si MLF for the strong antiferromagnetic coupling. The optical properties of the spacer extracted from the effective optical response of the MLF strongly support its metallic nature. The optical conductivity spectra of various phases of Fe-Si compounds were calculated and compared with the extracted optical properties of the spacer. From the above theoretical investigations it is concluded that a E2-phase metallic FeSi compound is spontaneously formed at the interfaces during deposition.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.2
• /
• pp.39-45
• /
• 2004

This paper describes the design and implementation of Serial ATA physical layer and performance measurement. It is composed of tranceiver circuit that has the NRZ data stream with +/-250㎷ voltage level and 1.5Gbps data rate, transmission PLL circuit, clock ＆ data recovery circuit, serializer/deserializer circuit and OOB(Out Of Band) generation/detection circuit. We implement the verification of the silicon chip with 0.18${\mu}{\textrm}{m}$ Standard CMOS process. It can be seen that all of the blocks operate with no errors but the data transfer rate is limited to the 1.28Gbps even this should support 1.5Gbps data transfer rate.

• Journal of Sensor Science and Technology
• /
• v.27 no.5
• /
• pp.306-310
• /
• 2018

In order to develop a highly sensitive infrared sensor, it is necessary to develop techniques for decreasing the rate of heat absorption and the transition of the absorption wavelength to a longer wavelength, both of which can be induced by decreasing the pixel size of the bolometer. Therefore, in this study, $1{\mu}m$ hole-arrays with a subwavelength smaller than the incident infrared wavelength were formed on the amorphous silicon-based microbolometer pixels in the absorber, which consisted of a TiN absorption layer, an a-Si resistance layer and a SiNx membrane support layer. We demonstrated that it is possible to reduce the thermal time constant by 16% relative to the hole-patternless bolometer, and that it is possible to shift the absorption peak to a shorter wavelength as well as increase absorption in the $4-8{\mu}m$ band to compensate for the infrared long-wavelength transition. These results demonstrate the potential for a new approach to improve the performance of high-resolution microbolometers.

• Journal of KIISE:Information Networking
• /
• v.34 no.3
• /
• pp.175-185
• /
• 2007

In IEEE 802.15.4 (Low-Rate Wireless Personal Area Network) specification, a successful reception and validation of a data or MAC command frame can be confirmed with an acknowledgment. However, the specification does not support security for acknowledgment frame; the lack of a MAC covering acknowledgments allows an adversary to forge an acknowledgment for any frame. This paper proposes an identity authentication mechanism at the link layer for acknowledgment frame in IEEE 802.15.4 network. With the proposed mechanism there is only three bits for authentication, which can greatly reduce overhead of device. The encrypted bit stream for identity authentication will be transmitted to device by coordinator within association process. Statistical method and simulation results prove that our mechanism is successful in handling MAC layer attack.

• Journal of KIISE:Information Networking
• /
• v.34 no.2
• /
• pp.134-142
• /
• 2007

Several mobility supporting protocols have been proposed across OSI reference layers. Each protocol has similar or different characteristics based on its operating layer which affect a handover latency. In this paper, we analyze handover performance of most representative protocols in each layer. For analysis, we use SUBNET model based Markovian model and movement model. In result, difference of protocol handover latency is not occurred by DAD but also by security, movement detection, message processing time.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.1
• /
• pp.137-148
• /
• 1998

In this paper, we proposed the algorithm to run MCS protocol, the core technology of T.120 series, over Multicast Transport Protocol and described an implementation architecture we proposed. An algorithm implemented can utilize some functions of Multicast Transport Layer fully, keeping the backward compatibility with the existing Mes. In order to do so, when a connection sets up, the Multicast Transport Layer looks into whether that of the peer entity does have multicast functionality. If it has, multicast functionality can be used. Unless, it can not. We are going to contribute these technologies to IMTC organizing the interoperability test of T.l20 series.