• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 춘계 학술대회논문집
• /
• pp.113-119
• /
• 2000

Two-dimensional steady flow of two immiscible, compressible fluids are considered when the temperature of each layer is constant. Both upper and lower fluids are bounded by two horizontal rigid boundaries with symmetric obstruction of compact support at the tourer boundary. By using asymptotic method, we derive the forced K-dV equation governing interfacial wave. Various solutions and numerical results are presented.

• 대한수학회지
• /
• 제34권1호
• /
• pp.119-133
• /
• 1997

This paper concerns the symmetric wave solutions between two immiscible, inviscid, and incompressible fluids of different but constant densities in the presence of small elliptic obstruction of compact support at the rigid bottom when the effect of gravity is considered (Fig. 1).

• 한국통신학회논문지
• /
• 제33권3B호
• /
• pp.100-111
• /
• 2008

본 논문에서는 무선랜을 기반으로 하는 무선 홈네트워크 환경에서 사용자가 원하는 수준의 QoS 제공을 위하여, 유선 인터넷과 무선 홈네트워크를 포함하는 전체적인 네트워크에서의 QoS 제공 구조를 제안하고, 현실적으로 가장 문제가 되는 부분인 무선 홈네트워크 환경에서의 QoS 제공을 위하여 단지 무선랜의 MAC 레벨에서만 문제를 다루지 않고 네트워크 계층과 데이터 링크 계층을 통합적으로 고려하는 방식으로 문제를 접근한다. 이러한 통합적인 QoS 제공 방식을 사용할 경우, 기존 무선랜 단말의 최소한의 변경으로 QoS 제공이 가능할 뿐 아니라 무선랜의 MAC 레벨에서만 QoS 제공 문제를 다루는 기존의 방법들보다 보다 우수한 성능을 보이는 장점이 있으며, 시뮬레이션을 통하여 제안된 방식의 우수성을 검증한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.188-190
• /
• 2007

The MEA with the catalyst layer containing PtRu black and 60 wt. %Pt/C as their anode and cathode catalysts. For find to effect of carbon support, the MEA with platinum black for cathode catalyst was fabricated. The performance of the MEA with the catalyst layer containing (PtRu black:60 wt.% Pt/C) as their anode and cathode catalyst has shown competitively higher value than the performance of the MEA with the catalyst layer containing (PtRu black:Pt black) as their anode and cathode catalyst.

• 보존과학연구
• /
• 통권21호
• /
• pp.119-143
• /
• 2000

The pigments composition and structure of the mural painting at Pongjongsa Kuknakjon is discussed. The structure of inner wall is consisited of Paint layer, Ground divided two layers of yellow and white pigments, Support. In case of outer wall, it is consisted of Paint layer, Ground divided three layers of yellow and green pigments, a layer mixed green pigments and paint layer, Support. As a result of compositon analysis of mural painting pigments at Pongjongsa Kuknakjon using Micro-area X-ray diffraction system, the red pigment on inner wall is consisted of Heamatite($Fe_2O_3$), Magnetite($Fe_3O_4$)of deep black pigment, and Chalcocite($Cu_2S$) of light black pigment. The white pigment on outer wall is consisted of Anglesite($PbSO_4$) and Atacamite($Cu_2CI(OH)_3$) of green pigment. We found out that natural pigments painted in the mural painting at Pongjongsa Kuknakjon has kept up its own color for a long time due to using the natural pigment not to artificial synthetic pigment.

• Bulletin of the Korean Chemical Society
• /
• 제19권7호
• /
• pp.733-737
• /
• 1998

Using an atom superposition and electron delocalization molecular orbital (ASED-MO) method, we have compared adsorption properties of adsorbates on the Pt(Ill) surface with the Pt(lll)/γ-Al203 surface in the ethylene hydrogenation reaction. In two-layer thick model systems, the calculated activation energy of the hydrogenation by the surface platinum hydride is equal to the energy by the hydride over supported platinum/γ-alumina. The transition structure on platinum is very close to the structure on the supported platinum/γ-alumina surface. Hydrogenation by the surface hydride on platinum can take place easily because the activation energy is about 0.5 eV less than hydrogenation by ethylidene. On supported platinum/,y-alumina the activation energy of the hydride mechanism is about 0.61 eV less than that of ethylidene mechanism. In one-layer thick model systems, the activation energy of hydrogenation by ethylidene is about 0.13 eV less than the activation energy of hydride reaction. The calculated activation energy by the hydride over the supported platinum y-alumina is 0. 24 eV higher than the platinum surface. We have found from this result that the catalytic properties of one-layer thick model systems have been influenced by the support but the two-layer thick model systems have not been influenced by the support.

• Geomechanics and Engineering
• /
• 제11권4호
• /
• pp.471-492
• /
• 2016

Underground tunnelling is one of the sustainable construction methods which can facilitate the increasing passenger transportation in the urban areas and benefit the community in the long term. Tunnelling in various ground conditions requires careful consideration of the stability factor. This paper investigates three dimensional stability of a shallow circular tunnel in a layered soil. Upper bound theorem of limit analysis was utilised to solve the tunnel face stability problem. A three dimensional kinematic admissible failure mechanism was improved to model a layered soil and limiting assumptions of the previous studies were resolved. The study includes calculation of the minimum support pressure acting on the face of the excavation in closed-face excavations. The effects of the characteristics of the layers on the minimum support pressure were examined. It was found that the ratio of the thickness of cover layers particularly when a weak layer is overlying a stronger layer, has the most significant influence on the minimum tunnel support pressure. Comparisons have been made with the results of the numerical modelling using FLAC3D software. Results of the current study were in a remarkable agreement with those of numerical modelling.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.659-661
• /
• 2013

본 논문은 안드로이드 OS기반 셋톱박스의 다중 Wi-Fi 무선 네트워크 모듈을 지원하는 방법에 관한 연구이다. 안드로이드 OS기반 셋톱박스의 경우 모바일 OS 사용으로 인해 다양한 무선 네트워크 모듈을 지원하는데 제한적인 단점이 있다. 본 논문은 네트워크 장치 변경에 제한적인 셋톱박스를 사업자의 요구 및 시장 상황에 맞는 다양한 Wi-Fi 무선 네트워크 모듈을 지원하도록 안드로이드 OS의 Hardware Abstract Layer(HAL)를 재구성 하고, 다중 무선 네트워크 모듈 지원 플랫폼 구현 방법에 대한 연구이다.

• Structural Engineering and Mechanics
• /
• 제86권1호
• /
• pp.93-107
• /
• 2023

In this paper, a density based topology optimization is proposed for generating of supports required in additive manufacturing to maintain the overhanging regions of main structures during layer by layer fabrication process. For this purpose, isogeometric analysis method is employed to model geometry and structural analysis of main and support structures. In order to model the problem two cases are investigated. In the first case, design domain of supports can easily be separated from the main structure by using distinct isogeometric patches. The second case happens when the main structure itself is optimized by using topology optimization and the supports should be designed in the voids of optimum layout. In this case, in order to avoid boundary identification and re-meshing process for separating design domain of supports from main structure, a parameterization technique is proposed to identify the design domain of supports. To achieve this, two density functions are defined over the entire domain to describe the main structure and supporting areas. On the other hand, since supports are under gravity loads while main structure and its stiffness is not completed during manufacturing process, in the proposed method, stiffness of the main structure is considered to be trivial and the gravity loads are also naturally applied to design support structures. By doing so, the results show reasonable supports are created to protect, continuously, overhanging surfaces of the main structure. Several examples are presented to demonstrate the efficiency of the proposed method and compare the results with literature.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권6호
• /
• pp.422-433
• /
• 2015

In this paper, we demonstrate inter-layer prediction tools for scalable video coders. The proposed scalable coder is designed to support not only spatial, quality and temporal scalabilities, but also view scalability. In addition, we propose quad-tree inter-layer prediction tools to improve coding efficiency at enhancement layers. The proposed inter-layer prediction tools generate texture prediction signal with exploiting texture, syntaxes, and residual information from a reference layer. Furthermore, the tools can be used with inter and intra prediction blocks within a large coding unit. The proposed framework guarantees the rate distortion performance for a base layer because it does not have any compulsion such as constraint intra prediction. According to experiments, the framework supports the spatial scalable functionality with about 18.6%, 18.5% and 25.2% overhead bits against to the single layer coding. The proposed inter-layer prediction tool in multi-loop decoding design framework enables to achieve coding gains of 14.0%, 5.1%, and 12.1% in BD-Bitrate at the enhancement layer, compared to a single layer HEVC for all-intra, low-delay, and random access cases, respectively. For the single-loop decoding design, the proposed quad-tree inter-layer prediction can achieve 14.0%, 3.7%, and 9.8% bit saving.