• Tunnel and Underground Space
• /
• v.3 no.1
• /
• pp.63-79
• /
• 1993

The design of tunnels in rock masses often demands more informations on geologic features and rock mass properties than acquired by usual field survey and laboratory testings. In practice, the situation that a perfect set of geological and mechanical input data is given to geomechanics design engineer is rare, while the engineers are asked to achieve a high level of reliability in their design products. This study presents an artificial neural network which is developed to resolve the difficulties encountered in conventional design techniques, particulary the problem of deteriorating the confidence of existing numerical techniques such as the finite element, boundary element and distinct element methods due to the incomplete adn vague input data. The neural network has inferring capabilities to identify the possible failure modes, support requirements and its timing for underground openings, from previous case histories. Use of the neural network has resulted in a better estimate of the correlation between systems of rock mass classifications such as the RMR and Q systems. A back propagation learning algorithm together with a multi-layer network structure is adopted to enhance the inferential accuracy and efficiency of the neural network. A series of experiments comparing the results of the neural network with the actual field observations are performed to demonstrate the abilities of the artificial neural network as a new tunnel design assistance system.

• Journal of Veterinary Clinics
• /
• v.16 no.1
• /
• pp.1-7
• /
• 1999

The purpose of the present study was to evaluate the easiness of suture and fixation of modified total ring prostheses (m-TRP). Twelve healthy dogs (B.W.2-10 kg) were randomly assigned to three groups. In group A (3 dogs), total ring prostheses was fixed by penetrating a suture material through tracheal mucosa. In group B (3 dogs), TRP was fixed by suturing on tracheal cartilage and muscular layer not penetrating through tracheal mucosa. m-TRP was applied to the cervical portions (group M-C,3 dogs), and thoracic portions (group M-T,3 dogs). Operating time of group M-C (37.33$\pm$6.80 min.) was shorter than those of groups B (83.33$\pm$8.50 min.) and A (63.33$\pm$11.06 min.) (p＜0.01). Clinical complications were minimal and limited to mild, short-term hematoma, vomiting, edema, and inflammation. Coughing remarkably decreased in group B rather than group A. Dyspnea was not showed in group A, B, and M-C, but group M-T had a mild dyspnea. Gross postmortem findings were similar in all groups. Mild adhesions were present between prostheses and adjacent structures, but tracheal lumen was clean. Severe adhesions were present where m-TRP had been applied in the thoracic portions. Histopathologic abnormalities included mild to moderate adventitial and periprosthetic fibrosis and mild adventitial inflammation. The present study indicated that m-TRP were easier in suture and fixation than TRP and had no differences in support for trachea and side effects.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.339-342
• /
• 2005

In order to support ultrawide-band signal generation for low rate WPAN, several types of signal generation mechanisms are suggested such as Chaos, Impluse, and Chirp signals by the activity of IEEE 802.15.4a. The communication system applied chaos theory may have ultrawide-band characteristics with spread spectrum and immunity from multipath effect. In order to use the advantage of chaotic signal generation, we introduce the system implementation of communication and networking systems with the chaos UWB signal. This system may be composed of mainly three parts in hardware architecture : RF transmission with chaotic signal generation, signal receiver using amplifiers and filters, and 8051 & FPGA unit. The most difficult part is to implement the chaotic signal generator and build transceiver with it. The implementation of the system is devidced into two parts i.e. RF blocks and digital blocks with amplifiers, filters, ADC, 8051 processor, and FPGA. In this paper, we introduce the system block diagram for chaotic communications. Mainly the RF block is important for the system to have good performance based on the chaotic signal generator. And the main control board functions for controlling RF blocks, processing Tx and Rx data, and networking in MAC layer.

• Journal of the Korean Society of Safety
• /
• v.30 no.3
• /
• pp.107-113
• /
• 2015

The goal of this paper is to investigate structural integrity factors of RMI(reflective metal insulation) to confirm the design requirements in nuclear power plant. Currently, a glass wool insulation is using now, but it will gradually be replaced with the reflective metal insulation maded by stainless steel plates. The main function of an insulation is to minimize a heat loss of vessel and pipes in RCS(reactor coolant system). It has to maintain structural a integrity in nuclear power plant life duration. In this study, the structural integrity analysis was carried out both multi-plate and outer shell plate by using a static analysis and experimental test. First, inner multi-plate has a self support structure for being air space. Because the effect of total static weight in multi-layer plate is low, a plate collapse possibility is not high. Considering optimum thin plate pressing process, it has to pre-check the basic physical properties. Second, the outer segment thickness and stiffener shape are verified by the numerical static analysis, and sample test for both type of panel and cylindrical pipe model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2419-2422
• /
• 2010

The current marine internal communication systems are usually composed of NMEA0183, NMEA2000, and MiTS protocols which are located on the physical layer based on RS-422, RS-485, CAN, and EtherNet. However, general vessel communication method have a weak point that must establish the extra private line. But, the power line communication has advantage over general vessel communication method as it uses AC220V/DC24V without changing line. Therefore, we will propose a new bridge based on the DC-PLC(power Line communication) technique which support the NMEA0183 protocol inside vessel network systems.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.6
• /
• pp.661-674
• /
• 2010

Bacterial biomass and its activity were measured in two kinds of granular activated carbon (GAC), the experimental and existing biofiltration system in a drinking water plant. The bacterial biomass was around 210 to 250 nmol P/g WW with phospholipid concentration at acclimation of ozonation treatment. The phospholipid biomass shows more or less a declining gradient along filter depth and no clear seasonality in its values. On the other hand, the microbial activity of [$^3H$]-thymidine and [$^{14}C$]-acetate incorporation within cells increased significantly along the filter depth, showing the difference of three fold between the upper and bottom layer. These factors support the different microbial composition or metabolic activity along the depth of GAC column. Turnover rates, the rate of bacterial biomass and production of biofilm, ranged from 0.26 /hr to 0.37 /hr, indicating a highly rapid recovery itself at amature state. In the non-ozonation treatment, the bacterial biomass was lower than in the ozonation and biological activity also declined towards the filter depth. The biomass levels during cessation of ozonation in the existing GAC filters were 68% of the actively ozonated state.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.787-793
• /
• 2015

In order to support reliable medium access control (MAC) layer multicast services in Broadband Wireless Access (BWA) networks, we here propose spreading codes (Cumulative ACK (CA) code and ARQ Feedback Request (AFR) code) based reliable multicast feedback scheme. The status indications based on the automatic repeat request (ARQ) mechanism are needed in some multicast services. In accordance with various wireless channel environments, we demonstrate the performance excellency of our proposed scheme with respect to required uplink resources compared with the original feedback scheme based on unicast ARQ feedback messages. In addition, we analyze packet error rate (PER) against the various wireless channel environments.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.5
• /
• pp.365-374
• /
• 2004

This paper proposes the architecture of Intermediate System to Intermediate System routing protocol. IS-IS is a link state routing protocol designed to provide routing in a network layer protocols with datagram services. IS-IS has favored scalability and stability. So, it is important to support IS-IS for the MPLS system used in backbone networks. Especially, IS-IS must provide network state information and available resource information for supporting qualify of services in MPLS network. Therefore, we propose the design architecture of IS-IS routing protocol and the implementation technologies. Also, we propose extended architecture for traffic engineering in ATM based MPLS system.

• Journal of the Korean Society for Library and Information Science
• /
• v.42 no.3
• /
• pp.45-59
• /
• 2008

This study is to recognize the function of the regional central library's role and to address its support to the community public libraries ; such is one of the focuses of the revised library law. Through the mixed layer model, the regional central library can contribute to a better cooperation between the national central library and community public library in each region. Regional libraries. under the supervision of regional library service committee, can execute many local enterprises efficiently such as library informatization projects. the associative storage, the regional librarian education and the establishment of information commons through integrating the regional information.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.1
• /
• pp.9-15
• /
• 2010

In this paper, A reinforced concrete slab bridges is analyzed by the composite laminates theory. Both the geometry and the material of the cross section of the reinforced concrete slab bridge are considered symmetrical with respect to the mid-surface so that the bending extension coupling stiffness, Bij = 0, and D16 = D26 = 0. Each longitudinal and transverse steel layer is regarded as a lamina, and material constants of each lamina is calculated by the use of rule of mixture. This slab with simple support is under uniformly distributed vertical and axial loads. In this paper, the finite difference method and specially orthotropic laminates theory are used for analysis. The result of specially orthotropic laminates theory analysis is modified to obtain the solution of the beam analysis. The result of this paper can be used for reinforced concrete slab analysis by the engineers with undergraduate study in near future.