• 항공우주시스템공학회지
• /
• 제14권5호
• /
• pp.66-72
• /
• 2020

본 연구에서는 증기발생기 내부로 냉각수 공급 시 화염에 의한 냉각수 분사 노즐 손상이 없도록, 초반 냉각수 공급량을 늘리는 방안에 대한 연구를 진행하였다. 초기 증기발생기 시험 시 벤추리만 사용하여 유량을 제어하였는데, 초반 유량 안정화 구간 동안 연소실 내부로 냉각수 공급이 되지 않아 냉각수 노즐의 손상이 발생하였다. 이를 해결하기 위해 벤추리와 오리피스를 병렬로 구성하여, 초반 공급 유량을 늘림으로써 냉각수 매니폴드와 연소실 사이 차압을 형성시켜 냉각수를 공급하였다. 수류시험을 통해 벤추리와 오리피스 공급 시퀀스를 확립하였으며, 최종 검증을 위해 연소실험을 진행하였다. 실험 결과 연소 초반 지속적으로 냉각수를 공급하는 것을 확인하였으며, 냉각수 노즐 손상 없이 성공적으로 실험을 수행하였다.

• ALGAE
• /
• 제35권3호
• /
• pp.277-292
• /
• 2020

Omega-3 fatty acids, including eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), are polyunsaturated fatty acids beneficial to human health. A limited number of microalgae have been used for commercial omega-3 production, which necessitates the identification of new microalgae with high omega-3 contents. We explored the fatty acid composition and EPA and DHA contents of the mixotrophic dinoflagellate Gymnodinium smaydae fed with the optimal algal prey species Heterocapsa rotundata. Cells of G. smaydae were found to be rich in omega-3 fatty acids. In particular, the DHA content of G. smaydae was 21 mg g^-1 dry weight, accounting for 43% of the total fatty acid content. The percentage of DHA in the total fatty acid content of G. smaydae was the highest among the reported microalgae except for Crypthecodinium cohnii. Moreover, to determine if the prey supply interval affected the growth rate of G. smaydae and its fatty acid content, three different prey supply intervals (daily, once every 2 d, and once for 4 d) were tested. Daily prey supply yielded the highest total fatty acid and DHA contents in G. smaydae. Furthermore, we successfully produced high-density G. smaydae cultures semi-continuously for 43 d with daily prey supply. During the semi-continuous cultivation period, the highest density of G. smaydae was 57,000 cells mL^-1, with an average growth rate of 0.7 d^-1. Taken together, the percentage of EPA and DHA in the total fatty acid content was maintained in the range of 54.2-56.9%. The results of this study support G. smaydae as a promising microalgal candidate for commercial DHA production and demonstrate that daily supply of prey can efficiently produce high-density G. smaydae cultures for more than a month.

• 대한통합의학회지
• /
• 제6권4호
• /
• pp.149-169
• /
• 2018

Purpose : This study was to develop a strategy for modeling future workforce projections to serve as a basis for analyzing annual supply of and demand for physical therapists across the South Korea into 2030. Methods : In-and-out movement model was used to project the supply of physical therapists. The demand was projected according to the demand-based method which consists of four-stages such as estimation of the utilization rate of the base year, forecasting of health care utilization of the target years, forecasting of the requirements of clinical physical therapists and non-clinical physical therapists based on the projected physical therapists. Results : Based on the current productivity standards, there will be oversupply of 39,007 to 40,875 physical therapists under the demand scenario of average rate in 2030, undersupply of 44,663 to 49,885 under the demand scenario of logistic model, oversupply of 16,378 to 19,100 under the demand scenario of logarithm, and oversupply of 18,185 to 20,839 under the demand scenario of auto-regressive moving average (ARIMA) model in 2030. Conclusion : The result of this projection suggests that the direction and degree of supply of and demand for physical therapists varied depending on physical therapists productivity and utilization growth scenarios. However, the need for introduction of a professional physical therapist system and the need to provide long-term care rehabilitation services are actively being discussed in entering the aging society. If community rehabilitation programs for rehabilitation of disabled people and the elderly are activated, the demand of physical therapists will increase, especially for elderly people. Therefore, healthcare policy should focus on establishing rehabilitation service infrastructure suitable for an aging society, providing high-quality physical therapy services, and effective utilization of physical therapists.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.855-866
• /
• 2023

With the rapid advancement and sophistication of defense weapon systems, the government, military, and the defense industry have conducted various innovative attempts to improve the efficiency of post-logistics support(PLS). The Ministry of Defense has mandated RAM-C(Reliability, Availability, and Maintainability-Cost) analysis as a requirement according to revised Total Life Cycle System Management Code of Practice in May 2022. Especially, for the project budget forecast of new PBL(Performance Based Logistics) business contacts, RAM-C is recognized as an obligatory factor. However, relevant entities have not officially provided guidelines or manuals for RAM-C analysis, and each defense contractor conducts RAM-C analysis with different standards and methods to win PBL-related business contract. Hence, this study aims to contribute to the generalization of the analysis procedure by presenting a cost analysis case based on RAM-C for the supply of military depot maintenance PBL project. This study presents formulas and procedures to determine requirements of military depot maintenance PBL project for repair parts supply. Moreover, a sensitivity analysis was conducted to find the optimal cost/utilization ratio. During the process, a correlation was found between supply delay and total cost of ownership as well as between cost variability and utilization rate. The analysis results are expected to provide an important basis for the conceptualization of the cost analysis for the supply of military depot maintenance PBL project and are capable of proposing the optimal utilization rate in relation to cost.

• 보건행정학회지
• /
• 제33권4호
• /
• pp.457-478
• /
• 2023

Background: This study aims to contribute to the adjustment of the appropriate doctor manpower by analyzing the distribution, supply and demand, and estimation of the doctor manpower. Methods: This study utilized the medical personnel data of the Ministry of Health and Welfare, population trend data of the National Statistical Office, and health insurance benefit performance data of the National Health Insurance Service. Based on 2021, we compared the number of doctors in actual supply and the number of doctors in demand according to the amount of medical use by gender and age for 250 regions. Logistic regression analysis and scenario analysis were performed to estimate the future medical workforce by considering the demand for doctors according to the future demographic structure, the size of the quota in medical schools, and the retirement rate. Results: There were 186 regions in which the supply of doctors was below average, and the average ratio of the number of doctors in supply to demand in the region was 62.1%. Conclusion: In order to increase the number of active doctors nationwide to at least 80%, 7,756 people must be allocated. The number of doctors in demand is estimated to decrease after increasing to 1.492 times in 2059. The future projected number of doctors is expected to increase to 1.349 times in 2050 and then decrease taking into account the doctor quota and the retirement rate.

• 한국화재소방학회논문지
• /
• 제30권2호
• /
• pp.68-74
• /
• 2016

도로터널에 적용하는 반횡류환기방식은 터널의 전연장에 걸쳐서 단위길이당 풍량이 균일하게 될 수 있도록 포트의 개도 조정이 필수적이다. 그러나 현재 국내에서 운영중인 터널의 경우에는 설계시 이에 대한 고려가 적절히 이루어지지 못하고 있는 실정이다. 이에 본 연구에서는 개도계산을 위한 프로그램을 개발하고 반횡류환기방식의 터널에서 포트의 운영방안을 제시하였다. 연구결과, 포트의 개도는 급기방식의 덕트에서는 환기소측에서 덕트의 말단(bulk head)쪽으로 갈수록 증가하였다가 감소하는 경향을 가지며, 최소 개도는 56% 정도로 나타나고 있다. 또한 배기방식에서는 환기소측이 15% 정도로 가장 작고 bulk head 쪽으로 갈수록 증가하는 경향을 보이고 있다. 화재시 300 m 구간의 배연풍량을 검토한 결과, 포트사이즈를 조정하지 않는 경우와 급기방식으로 포트사이즈을 조정한 경우에는 터널중앙부의 배연량이 각각 8.1%와 12.5%로 터널중앙부의 배연풍량이 저조한 것으로 나타났다. 따라서 반횡류환기방식의 터널에서는 평상시 환기효율이 저하하더라도 배연시 균일한 풍량을 얻을 수 있도록 포트의 개도를 설정하여 운영하는 것이 반드시 필요한 것으로 판단된다.

• 한국터널지하공간학회 논문집
• /
• 제21권1호
• /
• pp.177-188
• /
• 2019

횡류식 환기 시스템이 설치된 터널에서 급, 배기구 포트 개구면적의 최적화는 외부로부터 터널 내에 급기되는 신선공기의 분배를 균일하게 하고 터널 내 오염물질을 효율적으로 배출하여 터널 이용자에게 안전하고 쾌적한 터널 환경을 제공하기 위한 것이다. 이를 위하여 횡류 환기방식이 적용된 대심도 복층터널 내부에 균일한 급기 또는 배기풍량을 얻기 위해서 급, 배기구 포트 면적계산 및 최적화하기 위한 프로그램이 개발되었다. 개발된 포트 면적 계산 및 최적화 프로그램의 신뢰성 확보를 위해 현재 운영 중인 반횡류 환기방식을 적용하고 있는 터널의 덕트 내 풍속을 측정하였다. 또한 동일한 터널에 대한 3차원 수치해석을 수행하였고 CFD 결과를 측정된 값과 비교하였다. 분석결과, 프로그램이 예측한 값과 현장측정결과의 오차율은 약 6.72%를 보이고 있으며, 3차원 수치해석 결과와의 오차율은 약 4.86%로 나타났다. 두 결과 모두 10% 이내의 오차율을 보이고 있으므로, 이 포트 개구면적 최적화 프로그램을 사용해서 횡류식 터널의 급기 및 배기 포트의 최적화 설계가 가능할 것으로 기대된다.

• 한국환경보건학회지
• /
• 제38권3호
• /
• pp.251-260
• /
• 2012

Objectives: The purpose of this study was evaluating the applicability of the circulation dielectric barrier plasma process (DBD) for efficiently treating non-biodegradable wastewater, such as phenol. Methods: The DBD plasma reactor system in this study consisted of a plasma reactor (discharge, ground electrode and quartz dielectric tube, external tube), high voltage source, air supply and reservoir. Effects of the operating parameters on the degradation of phenol and $UV_{254}$ absorbance such as first voltage (60-180 V), oxygen supply rate (0.5-3 l/min), liquid circulation rate (1.5-7 l/min), pH (3.02-11.06) and initial phenol concentration (12.5-100 mg/l) were investigated. Results: Experimental results showed that optimum first voltage, oxygen supply rate, and liquid circulation rate on phenol degradation were 160 V, 1 l/min, and 4.5 l/min, respectively. The removal efficiency of phenol increased with the increase in the initial pH of the phenol solution. To obtain a removal efficiency of phenol and COD of phenol of over 97% (initial phenol concentration, 50.0 mg/l), 15 min and 180 minutes was needed, respectively. Conclusions: It was considered that the absorbance of $UV_{254}$ for phenol degradation can be used as an indirect indicator of change in non-biodegradable organic compounds. Mineralization of the phenol solution may take a relatively longer time than that required for phenol degradation.

• 수산경영론집
• /
• 제48권2호
• /
• pp.19-32
• /
• 2017

The purpose of this study is to identify problems and suggest improvements of estimating procedures and item of fisheries supply-demand statistics served as a basis for the fisheries supply-demand policies. Korea Rural Economic Institute(KREI) and Ministry of Oceans and Fisheries(MOF) respectively publish the fisheries supply-demand statistics. But the reliability of data is low as the statistics of these two organizations are limited and show discrepancy in the numbers. It is therefore difficult to use them as the basic data for policies. Also, an accurate data aggregation is difficult due to following problems in the items of statistics. 1) Problems in estimating route sales and non-route sales of production, 2) adequacy of fishery product yield rate compared to raw material in the fisheries import/export sector, 3) selection of target companies for understand stocks and survey scope of fish species, 4) applying'0'to non-edible product demand etc. In order to develop the fisheries industry as a future growth industry, it is necessary to establish the accurate fisheries supply-demand policy as the instability of fisheries supply and demand is increasing. To do this, statistical reliability has to be improved. The improvements proposed in this study should be implemented considering urgency. First of all, an exhaustive analysis of stock statistics and conversion rates of raw material yield in the fisheries import/export sector should be conducted. In the medium term and the long term, transferring production statistics to MOF and surveys on the use demand of non-food product and the level of reduced and discarded seafood products should be carried out in consecutive order.

• 품질경영학회지
• /
• 제46권4호
• /
• pp.959-972
• /
• 2018

Purpose: This study developed a simulation model that incorporates the uncertainty of demand and yield to obtain optimized results for supply chain coordination within environmental constraints. The objective of this study is to examine whether yield management for perishable products can achieve the goal of supply chain coordination between a single buyer and a single supplier under a variety of environmental conditions. Methods: We investigated the efficiency of a revenue-sharing contract and a wholesale price contract by considering demand and yield uncertainty, profit maximizing ratio, and success ratio. The implications for environmental variation were derived through a comparative analysis between the wholesale price contract and the revenue-sharing contract. We performed Monte Carlo simulations to give us the results of an optimized supply chain within the environments defined by the experimental factors and parameters. Results: We found that a revised revenue-sharing contracting model was more efficient than the wholesale price contract model and allowed all members of the supply chain to achieve higher profits. First, as the demand variation (${\sigma}$) increased, the profit of the total supply chain increased. Second, as the revenue-sharing ratio (${\Phi}$) increased, the profits of the manufacturer gradually decreased, while the profits of the retailer gradually increased, and this change was linear. Third, as the quality of yield increased, the profits of suppliers appear to increased. At last, success rate was expressed as the profit increased in the revenue-sharing contract compared to the profit increase in the wholesale price contract. Conclusion: The managerial implications of the simulation findings are: (1) a strategic approach to demand and yield uncertainty helps in efficient resource utilization and improved supply chain performance, (2) a revenue-sharing contract amplifies the effect of yield uncertainty, and (3) revised revenue-sharing contracts fetch more profits for both buyers and suppliers in the supply chain.