• Journal of the Korean Solar Energy Society
• /
• v.34 no.4
• /
• pp.57-65
• /
• 2014

In order to reduce greenhouse gas emissions in recent agricultural energy and increase the energy self-sufficiency rate of each farmer, it is extremely important to expand the supply of solar energy using unused space of agricultural facilities, roof. This study surveyed and analyzed the environmental and administrative factors such as problems according to the structure, azimuth and latitude of broiler houses and stability of standard broiler houses required to use broiler house roof based on the poultry houses in Sangju-si. The results can be summarized as follows: 55.6% of the solar energy facilities of according to the classification of arable lands of broiler houses were available, and 31.7% of them were available by classifying according to the azimuth. However, 20.6% of them were available in the survey considering all the arable land and azimuth. In the roof inclination of the broiler houses, from 20 to $25^{\circ}$ was the most common, 30 broiler houses. The broiler houses with the roof inclination more than $20^{\circ}$ accounted for 63% of the total. It was considered that the inclination was generally proper. In the structural safety, only 3 broiler houses that were constructed as a standard broiler house were available. In practice, all but one broiler house was inappropriate to expand the solar energy project using roof. The solar thermal facility weighed $63.6kg/m^2$ in total: the frame and solar thermal collector weighed $27.8kg/m^2$ and $35.8kg/m^2$, respectively. The standard broiler house required to be internally reinforced. This study suggested a plan for internal reinforcement and a feasible plan because there were problems with structural safety when installing solar thermal and photovoltaic systems.

• Korea journal of population studies
• /
• v.23 no.2
• /
• pp.113-141
• /
• 2000

The aim of this paper is to project the state of the labor farce and employment in Korea from 2000 to 2005. The labor market in Korea is experiencing significant changes with the rapid development of Information and Telecommunication Technology (ICT) and the transition of the Korean economy into a knowledge-based economy. On the labor supply side, it is expected that the growth of the labor force will be sluggish; baby boomers will become the middle-aged, while the proportion of senior citizens, the highly educated and the female labor force will grow fast. These changes will alter the human resources management system in business sectors. Moreover, the permanent employment relationship, the hierarchy system and the seniority-based wage system are all expected to change. On the labor demand side, the employment share in highly skilled. knowledge-intensive industries will grow faster than the rest of the economy in tandem with the quickly growing output share of these industries. Especially, more jobs will be created in the ICT industries. The proportion of labor in highly skilled and professional occupations will also grow faster than in other occupations. At the same time, the employment share of female workers will grow more quickly than that of the male workers. These changes, however, may worsen income inequalities and/or increase the unemployment rate when workers do not have the suitable skills or knowledge required by the knowledge-based economy. To avoid this, it is necessary for the government to build up a lifetime learning system for workers.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.234-234
• /
• 2017

Recent abnormal weather, especially continued rainfall during sowing season causes difficulty in proper sowing of wheat and delayed sowing after November 15 is concerned about freezing damage during winter, resulting in reduction of wheat yield. To correspond government policy of crop sufficiency improvement and produce and supply raw wheat and barley steadily, expansion of cultivation area is necessary and spring sowing of wheat is required. To obtain basic information on the improvement of spring sown wheat and barley production, comparison and path coefficients analysis was conducted for yield and yield related components from autumn and spring sown wheat and barley. Path analyses were known as very useful in clarifying the effects of yield components on grain yield formation, which were not accurately reflected in simple correlation anaylses. Most cultivated 5 wheat and 9 barley cultivars were sown on October and February at Cheon-ju province according to standard sowing method. For the spring sowing of wheat and barley, the varieties having vernalization degree I~III are seeded in the mid of February and seeding rate is 200~250kg/ha which is increased by 25% than autumn sowing. N-fertilizer of 95 kg/ha and the same amount of P, K dressed in autumn are applied at once as basal fertilizer. The magnitude of direct effect in each yield components on yield was in sequence as follows. In autumn wheat, grain number per $spike{\geq}$ the number of spike per $m^2$>1000-grain weight and in spring wheat, grain number per $ spike{\geq}the$ number of spike per $m^2$> 1000-grain weight. In autumn naked barley, 1000-grain weight> the number of spike per $m^2$, grain number per spike and in spring barely, the number of spike per $m^2$> grain number per spike > 1000-grain weight. In autumn covered barley, grain number per spike>the number of spike per $m^2$ and in spring coverd barley, the number of spike per $m^2$> grain number per spike, 1000-grain weight. In autumn malt barley, the number of spike per $m^2$>1000-grain weight and in spring malt barley, the direct effects of three yield components were similar. According to the path analysis of yield components for spring sown wheat and barley, it was suggested that adequate number of spike per $m^2$ was most important factor for yield increase.

• Economic and Environmental Geology
• /
• v.39 no.5 s.180
• /
• pp.607-613
• /
• 2006

For the reasonable use of low grade-shallow geothermal energy by Standing Column Well(SCW) system, the basic requirements are depth-wise increase of earth temperature like $2^{\circ}C$ per every 100m depth, sufficient amount of groundwater production being about 10 to 30% of the design flow rate of GSHP with good water quality and moderate temperature, and non-collapsing of borehole wall during reinjection of circulating water into the SCW. A closed loop type-vertical ground heat exchanger(GHEX) with $100{\sim}150m$ deep can supply geothermal energy of 2 to 3 RT but a SCW with $400{\sim}500m$ deep can provide $30{\sim}40RT$ being equivalent to 10 to 15 numbers of GHEX as well requires smaller space. Being considered as an alternative of vertical GHEX, many numbers of SCW have been widely constructed in whole country without any account for site specific hydrogeologic and geothermal characteristics. When those are designed and constructed under the base of insufficient knowledges of hydrgeothermal properties of the relevant specific site as our current situations, a bad reputation will be created and it will hamper a rational utilization of geothermal energy using SCW in the near future. This paper is prepared for providing a guideline of SCW design comportable to our hydrogeothermal system.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2007

In view of energy supply, biogas can be seen as alternative fuel by substituting considerable amount of fossil fuel and may be utilized for heat and power production or for transport fuel production ($CH_4-enriched$ biogas). The aim of this research is to analyse the emission of $NO_x$ and CO from biogas fired combustion engine for electric power production. The result indicate a significant effect of biogas composition ($CH_4-CO_2$ ratio) and biogas flow rate on the air pollutants emission. The emission factors from this study were compared with those of U.S. EPA. Low $CH_4-CO_2$ ratio condition typically shows the lower $NO_x$ and CO emission than higher $CH_4-CO_2$ ratio condition. At normal $CH_4-CO_2$ ratio (7:3) emission factors of $NO_x$ and CO were 1.29 and 30.43 g/MMBtu, respectively. At low $CH_4-CO_2$, ratio (6:4) emission factors of $NO_x$ and CO were 0.646 and 60.86 g/MMBtu, respectively, It should be emphasized that the actual emission may vary considerably from these results due to operating conditions including torque load and engine speed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.2
• /
• pp.107-112
• /
• 1974

In order to establish a rational application method of potash to paddy rice(Oryza sativa L. Jinheung, a Japonica variety) field and pot experiments on split application of two rates (6kg and 12kg $K_2O$ per 10a) of potash at a certain critical growing stage have conducted in 1973 and the results were as follows: 1. At the treatment where a rate of 6kg $K_2O$ per 10a(lower dose) of potash was supplied in two split doses, a half at transplanting time and the other half at young panicle formation stage, the yield of paddy rice appeatred to be low due to less number of panicles per hill. (Field experiment) 2. The treatment where potash supply ceased at transplanting time or at effective tillering stage but supplied at the other two stages (including panicle initiation stage) have failed to increase K content in the flag leaf and have shown low maturity and low thousand grain weight, which resulted in low paddy rice yield. (pot experiment) 3. From above two facts, it is concluded that the application of potash at transplanting time is an important practice for the high yielding of paddy rice. 4. The application of lime seemed to stimulate later growth of paddy depressing the unnecessary increase of poor miserable tillers in early stages of growth.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.4
• /
• pp.247-253
• /
• 2008

Winter annual green manure crops may be an effective tool for environmental-friendly agriculture system. The effect of legume (hairy vetch), non-legume (rye) and N fertilization ($190kg\;N\;ha^{-1}$) was examined and compared on red-pepper yield, nitrogen uptake, carbohydrate composition, and soil N and C contents. We monitored soil N and C for 120 days after incorporation (DAI) of green manures or mineral fertilizer. The mineralization of nitrogen reached the maximum around 30 DAI. The amount of inorganic nitrogen supplied by mineralization of hairy vetch residue was greater with than chemical N or rye. Photosynthetic rate was similar by 70 DAT in all treatments however, it in rye-incorporated red-pepper presented a sharp decline at later growth period. Leaf total nitrogen was greater with hairy vetch and chemical N than rye throughout the experiment. The soluble sugar increased steadily in all treatments from 40 to 110 days after transplanting (DAT) whereas starch showed a tendency of great decrease. Hairy vetch greatly promoted red-pepper growth by the later period however, chemical N showed the highest fruit yields.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.101-111
• /
• 2008

This paper introduces a high-speed Reed-Solomon(RS) decoder, which reduces the hardware complexity, and presents an RS decoder based FEC architecture which is used for 40Gb/s optical communication systems. We introduce new pipelined degree computationless modified Euclidean(pDCME) algorithm architecture, which has high throughput and low hardware complexity. The proposed 16 channel RS FEC architecture has two 8 channel RS FEC architectures, which has 8 syndrome computation block and shared single KES block. It can reduce the hardware complexity about 30% compared to the conventional 16 channel 3-parallel FEC architecture, which is 4 syndrome computation block and shared single KES block. The proposed RS FEC architecture has been designed and implemented with the $0.18-{\mu}m$ CMOS technology in a supply voltage of 1.8 V. The result show that total number of gate is 250K and it has a data processing rate of 5.1Gb/s at a clock frequency of 400MHz. The proposed area-efficient architecture can be readily applied to the next generation FEC devices for high-speed optical communications as well as wireless communications.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.118-124
• /
• 2008

For forward error correction, DVB-S2, which is the digital video broadcasting forward error coding and modulation standard for satellite television, uses a system based the concatenation of BCH with LDPC inner coding. In DVB-S2 the LDPC codes are defined for 11 different code rates, which means that a DVB-S2 LDPC decoder should support multiple code rates. Seven of the 11 code rates, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, and 9/10, are regular and the rest four code rates, 1/4, 1/3, 2/5, and 1/2, are irregular. In this paper we propose a flexible decoder for the regular LDPC codes. We combined the partially parallel decoding architecture that has the advantages in the chip size, the memory efficiency, and the processing rate with Benes network to implement a DVB-S2 LDPC decoder that can support multiple code rates with a block size of 64,800 and can configure the interconnection between the variable nodes and the check nodes according to the parity-check matrix. The proposed decoder runs correctly at the frequency of 200MHz enabling 193.2Mbps decoding throughput. The area of the proposed decoder is $16.261m^2$ and the power dissipation is 198mW at a power supply voltage of 1.5V.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.45-52
• /
• 2008

We investigated the design of an RF-powered, wireless temperature sensor tag chip using $0.18-{\mu}m$ CMOS technology. The transponder generates its own power supply from small incident RF signal using Schottky diodes in voltage multiplier. Ambient temperature is measured using a new low-power temperature-to-voltage converter, and an 8-bit single-slope ADC converts the measured voltage to digital data. ASK demodulator and digital control are combined to identify unique transponder (ID) sent by base station for multi-transponder applications. The measurement of the temperature sensor tag chip showed a resolution of $0.64^{\circ}C/LSB$ in the range from $20^{\circ}C$ to $100^{\circ}C$, which is suitable for environmental temperature monitoring. The chip size is $1.1{\times}0.34mm^2$, and operates at clock frequency of 100 kHz while consuming $64{\mu}W$ power. The temperature sensor required a -11 dBm RF input power, supported a conversion rate of 12.5 k-samples/sec, and a maximum error of $0.5^{\circ}C$.