• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.35-45
• /
• 2004

This paper analyzes the differences in the service quality priorities of air cargo service providers and customers. After having identified what constitutes the decisive factors with regards to air cargo service quslity, research was carried out to evaluate the differences in the service quality priorities of air cargo service providers and customers. Moreover, this paper analyzes these differences by separating air cargo service providers into Korean and international air cargo service providers. In order to attain the objectives of this research, the air cargo service sectors were divided into three general categories: supply capability(H/W), service accountability, and competitiveness of service fees and management capability(S/W). The researchers then placed 6 different criteria into each service category, for a total of 18. The evaluation of the service quality priorities of air cargo service providers and customers revealed very little difference between these two groups. With regards to the service criteria found in each service category, our research found marked differences between the service quality priorities of providers and customers in only three of the 18 criteria. However, we found marked differences in service quality priorities in 7 of the 18 criteria when the air cargo service providers were divided into Korean and international air cargo providers. While domestic air cargo service providers evaluated management's capability to handle cargo accidents and incidents as the most important priority, international air cargo service providers placed the highest priority on the cargo rate system. The results of this research imply that in order to properly evaluate the differences between the service quality priorities of air cargo service providers and customers, the air cargo service providers itself should be separated between the Korean air cargo service providers and the foreign providers because of their respective inherent perception on service quality.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.3
• /
• pp.364-370
• /
• 2008

Chemical analysis and in vitro studies were conducted to investigate the nutritive value for ruminants of cell mass from lysine production (CMLP) which is a by-product of the lysine manufacturing process. Proximate analysis, protein fractionation, and in vitro protein degradation using protease from Streptomyces griseus and strained ruminal fluid were carried out to estimate ruminal protein degradability of CMLP with two reference feedstuffs-soybean meal (SBM) and fish meal (FM). Amino acid composition and pepsin-HCl degradability were also determined to evaluate postruminal availability. CMLP contained 67.8% crude protein with a major portion being soluble form (45.4% CP) which was composed of mainly ammonium nitrogen (81.8% soluble CP). The amount of nucleic acids was low (1.15% DM). The total amount of amino acids contained in CMLP was 40.60% DM, which was lower than SBM (47.69% DM) or FM (54.08% DM). CMLP was composed of mainly fraction A and fraction B2, while the protein fraction in SBM was mostly B2 and FM contained high proportions of B2 and B3 fractions. The proportion of B3 fraction, slowly degradable protein, in CP was the highest in fish meal (23.34%), followed by CMLP (7.68%) and SBM (1.46%). CMLP was degraded up to 51.40% at 18 h of incubation with Streptomyces protease, which was low compared to FM (55.23%) and SBM (83.01%). This may be due to the insoluble portion of CMLP protein being hardly degradable by the protease. The in vitro fermentation by strained ruminal fluid showed that the amount of soluble fraction was larger in CMLP (40.6%) than in SBM (17.8%). However, because the degradation rate constant of the potentially degradable fraction of CMLP (2.0%/h) was lower than that of SBM (5.8%/h), the effective ruminal protein degradability of CMLP (46.95%) was slightly lower than SBM (53.77%). Unavailable fraction in the rumen was higher in CMLP (34.0%) compared to SBM (8.8%). In vitro CP degradability of CMLP by pepsin was 80.37%, which was lower than SBM (94.42%) and FM (89.04%). The evaluation of protein degradability using different approaches indicated that soluble protein in CMLP may supply a large amount of ammonia in the rumen while insoluble protein can be by-passed from microbial attacks due to its low degradability. The results from this study suggest that CMLP can be used as a protein supplement to ruminants for supplying both non-protein nitrogen to rumen microbes and rumen undegradable protein to the host animal.

• KDI Journal of Economic Policy
• /
• v.33 no.1
• /
• pp.125-148
• /
• 2011

Although the patient's problem with access to health information has been improved due to rapidly developing information technologies, such as the internet, some patients still do not have enough ability to understand, interpret, and analyze the health information. Given this view on the patient's asymmetric information problem, if a doctor provides sufficient effort to help patients understand and interpret medical information, the efficiency of patient's medical care use could be improved. This paper shows firstly that the patient's inefficient use of medical care originates from his information problems, such as the misperception of the effectiveness of medical care and secondly suggests that if the doctor makes sufficient effort to correct patient's information problems, the inefficiency can be ameliorated. This paper also suggests the manipulation of a doctor's payment method can lead a doctor to provide optimal level of efforts which can in turn lead patients to use the optimal level of medical care. With an optimal level of effort, a doctor can more easily achieve a patient's compliance with the newly recommended amount of medical care.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.27-35
• /
• 2008

This work proposes a 14b 150MS/s 0.13um CMOS ADC for SDR systems requiring simultaneously high resolution, low power, and small size at high speed. The proposed ADC employs a calibration-free four-step pipeline architecture optimizing the scaling factor for the input trans-conductance of amplifiers and the sampling capacitance in each stage to minimize thermal noise effects and power consumption at the target resolution and sampling rate. A signal- insensitive 3-D fully symmetric layout achieves a 14b level resolution by reducing a capacitor mismatch of three MDACs. The proposed supply- and temperature- insensitive current and voltage references with on-chip RC filters minimizing the effect of switching noise are implemented with off-chip C filters. The prototype ADC in a 0.13um 1P8M CMOS technology demonstrates a measured DNL and INL within 0.81LSB and 2.83LSB, at 14b, respectively. The ADC shows a maximum SNDR of 64dB and 61dB and a maximum SFDR of 71dB and 70dB at 120MS/s and 150MS/s, respectively. The ADC with an active die area of $2.0mm^2$ consumes 140mW at 150MS/s and 1.2V.

• Journal of Korean Society of Forest Science
• /
• v.45 no.1
• /
• pp.37-45
• /
• 1979

The purpose of the study was to define the labor change in the moutainous villages, So this study analyzed the mass dram of the population from the mountainous villages created by the unequal development between the first and second under the high economic development and the large difference in the income between city and rural area. The content of the study was (1) the foundation of the production in the survey area (2) labor change in the mountainous villages (3) the supply and the demand of the labor in this area. The date were collected from 118 household of 2 villages (one with a high level of brest product, and the other with a low level of forest products) in Cheon-nam Province through a questionarie. The results of the study were as follows. 1. The mass drain in the mountainous villages started in the middle of 1970's, and the rate of drain has been very rapid and accelerated. 2. The drain of the mountainous village with a low level of forest products is more than that of the mountainous village with a high level of forest products. 3. In the mountainous village with high level of forest products, the specialization in the farmer class has begun and the farmers with a side job are now increasing. 4. Generally the major drain consisted of the young class (16-30 age), and consequently it caused a change in the composition of labor power into old age and women. 5. The character of the forest labor market is how changing from closed to open.

• Journal of Environmental Impact Assessment
• /
• v.27 no.2
• /
• pp.170-180
• /
• 2018

Highland fields are concentrated in the Jaun area of Hongcheong-gun, a large amount of sediments are discharged from the highland fields. The sediment runoff affect the turbidity and water quality of the Soyang Lake, furthermore adversely affect water supply source of the capital region. There are several kinds of BMPs(Best management practices) to decrease the sedimentrunoff from the highland fields. Although construction cost of multistage sedimentation basins is very high, there is no actual survey data for the removal efficiency of suspended sediments and water quality in our country. In this study, stormwaterinflow and outflow of the multistage sedimentation basins were surveyed, and the removal efficiency of nonpoint source pollutants were analyzed. The stormwater survey results fortwo rainfall events show thatremoval efficiencies of SS, BOD and TP loads in the multistage sedimentation basins are 35%~62%, 24%~55%, 35%~58%, respectively. Although the measured efficiencies of the basins were lower than the theoretical efficiency, the proper operation and management can improve the removal rate of the basins. Turbid water problem in the upper parts of the Soyang River can be managed effectively through the additional installation of multistage sedimentation basins.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.4
• /
• pp.289-294
• /
• 2008

This experiment was conducted at college of Agriculture and Life Science in Chungnam National University from September, 2004 to June, 2007 in order to evaluate the mixture possibility between barley and rye in the area of Daejeon. Rye (cultivar; Koolgrazer) and barley (cultivar; Daeyeon Bori) were set for the experiment. The experiment was arranged in four treatments: R100 (rye 100%), R60 + B40(rye 60% + barley 40%), R50% + B50% (rye 50% + barley 50%), and R40% + B60% (rye 40% + barley 60%). The experiment was repeated three times in the randomized complete block. The average dry matter (DM) yield for three years of R100 weighed 9,282 kg and its DM yield was higher than any other DM yield. The higher the barley seed rates are, the lower the DM yield is (p<0.05). As the barley seed rates increased 40%, 50%, and 60% respectively, its vegetative percentage tended to increase 30%, 41%, and 47%, but the barley vegetative percentage against its seed rates did bring forth somewhat low results. Compared with R100, the contents of crude protein (CP) and in vitro dry matter digestibility (IVDMD) got higher as the barley seed rates became higher, while the contents of NDF, ADF, cellulose, and lignin were lower (p<0.05). Compared with R100, the yields of crude protein dry matter (CPDM) and digestible dry matter (DDM) showed lower in the any mixed barley (p<0.05). Thus, in case of using barley mixed with rye in the area of Daejeon, it seems to be quite difficult, unless the supply of high-productive barley variety is followed, to enhance the yields of DM, CPDM, and DDM.

• Korean Journal of Ecology and Environment
• /
• v.43 no.3
• /
• pp.400-408
• /
• 2010

The growth and microcystins production characteristics of three species of Microcystis (M. aeruginosa, M. ichthyoblabe, M. viridis) isolated from Yeongchun dam and Ankei dam in Kyungpook Province, South Korea were investigated at temperatures of $15{\sim}35^{\circ}C$ and light intensities of $35{\sim}180\;{\mu}mol\;m^{-2}\;s^{-1}$. All of the three species exhibited the highest growth rates (${\mu}_{max}$) over the $30^{\circ}C$. The maximum growth rates of M. aeruginosa and M. ichthyoblabe was observed at $70\;{\mu}mol\;m^{-2}\;s^{-1}$, while M. viridis showed maximum growth rate at $35\;{\mu}mol\;m^{-2}\;s^{-1}$. The maximum production of total microcystins was observed at $20^{\circ}C$, and the production of microcystins decreased according as temperature increase. The highest microcystins production of M. aeruginosa, M. ichthyoblabe and M. viridis observed at light intensities of $120\;{\mu}mol\;m^{-2}\;s^{-1}$, $70\;{\mu}mol\;m^{-2}\;s^{-1}$ and $35\;{\mu}mol\;m^{-2}\;s^{-1}$, respectively. The concentration of microcyst in production and microcystin types of three species according to temperatures and light intensities showed clear difference between the species.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.3
• /
• pp.233-239
• /
• 2013

A 100 W fuel cell system using chemical storage method has been applied for a propulsion system of the SUAV(Small Unmanned Aerial Vehicle). A fuel cell and battery have been combined for both the small/light hydrogen generation control system and the hybrid power supply system. A small hydrogen generation device was implemented to utilize NaBH4 aqueous solution and dead-end type PEMFC system, which were evaluated on the ground and by the flight tests. The system pressurized at a 45kpa stably operates and get higher fuel efficiency. The pressure inside of the hydrogen generation control system was maintained at between 45 kPa and 55 kPa. The 100W fuel cell system satisfies the required weight and power consumption rate as well as the propulsion system, and the fuel cell system performance was demonstrated through flight test.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.577-582
• /
• 2010

Purpose: When reconstruction for patients who have the large contralateral breast or a following large defect after mastectomy is required, conventional pedicled TRAM flap shows the unpredictable occurrence of fat necrosis and skin flap loss in a relatively high percentage due to insufficient blood supply. In an effort to obtain more stable TRAM flap blood circulation, we have performed a supercharged technique using deep inferior epigastric perforators (DIEP) with conventional pedicled TRAM flap. Methods: From September of 2006 to December of 2008, Fourteen supercharged TRAM flap were performed for breast reconstruction after modified radical mastectomy. The contralateral DIEP was anastomosed to the internal mammary vessels in contralateral pedicled TRAM flap or thoracodorsal vessels in ipsilateral pedicled TRAM flap. Nutrient vessels were selected by Multi-Detector Computed tomography (MD-CT) modalities. For the nutrient vessel, we used deep inferior epigastric vessels (DIEV) of the ipsilateral side in 8 patients, DIEV of the contralateral side in 6 patients. In addition, for the recipient vessel, we used thoracodorsal vessels in 8 patients, internal mammary vessels in 5 patients, intercostals artery perforators in 1 patient. Results: The mean age was 46.8 years and the average follow-up interval was 14 months. There were 11 immediate and 3 delayed breast reconstructions. Fat necrosis incidence rate in supercharged TRAM group was lower than in conventional TRAM flap group. There were no differences of the incidences of abdominal hernia in both groups. Conclusion: The supercharged TRAM flap produces an improvement in vascularity that permits use of all four zones of the flap. The breast reconstruction with supercharged technique is reliable and valuable methods which provide sufficient soft tissue from abdomen without significant complications.