• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.79-84
• /
• 2010

액체로켓엔진 공급시스템을 구성하는 배관, 오리피스, 굽힘관, 벨로우즈, 밸브, 플랜지 등의 공급계 부품들에 대한 액체로켓엔진 공급시스템 모듈을 개발하였다. 이 모듈은 각 부품별로 Sizing이 가능하며 압력강하를 계산할 수 있다. 또한, 공급시스템이 구성되면 시스템 전체 부품 개수, 압력강하, 출구압력, 무게를 도출할 수 있다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.257-260
• /
• 2001

The primary objective of Supply Chain Management (SCM) is to optimize the cash, material and information flow considering all components of Supply Chain (SC) . The plan, established for achieving such objective, is called Supply Chain Planning (SCP) . This SCP gives each SC component specific volume or operation task, should be done in specific due date, for optimizing SC. In detail, the degree of accomplishment for SCP, depends on the SCP achievement of each SC components, is very close to successful SCM. However, this achievement is affected by uncertainties about time and volume. In general, reliability concepts means the probability that a product or system will perform its specified function under prescribed conditions without failure for a specified period of time. Therefore, the concept of Supply Chain Reliability (SCR) and an analytic methodology to calculate the degree of achievement SCP using reliability concept are proposed in this paper. SCR means that the degree of achievement for SCP considering all SC components in due date. SCR can be used to measure the performance of whole supply chain and indicate the direction of SCP.

• 대한안전경영과학회지
• /
• 제8권6호
• /
• pp.139-147
• /
• 2006

In case of domestic automobile manufacturers introducing and running a make-to-order production system, JIT system is to provide a necessary number of components at a right place in time which is a specific supply chain management, is different from other occupations. This study is for establishing a efficient production planning and finding a management method to correspond with a manufacturing system and diversified supply chain management and building an information system to support it. For this, we analyze the relevant business process and utilize various informations occur in supply chain of domestic automobile components manufacturer. It will contribute to not only reliability improvement of production management system but also satisfaction for due date of products.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.195-202
• /
• 2002

The primary objective of Supply Chain Management (SCM) is to optimize the cash, material and information flow for satisfying customer demands through coordinating the relationship between Supply Chain components such as suppliers, manufacturers, and inventories, etc. By Supply Chain Planning (SCP), operation tasks or goals, should be done in specific due date, are ordered to each SC component for achieving such objective. However, the achievement for operation tasks or goals is affected by uncertainties in SC. In general, reliability theory Is explained as the probability that a product or system will perform its specified function under prescribed conditions without failure for a specified period of time. Therefore, the reliability of SC can be defined as the probability that SC will satisfy customer demands until the specific due date. In this paper, a basic framework to evaluate reliability is respectively proposed as supply chain components, and then a overall framework to estimate the reliability for SC is also proposed.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.2179-2183
• /
• 2009

As urbanization is progressed, the network for distributing water in a basin become complex due to the spatial expansion and parameter uncertainties of water supply systems. When a long range water supply plan is determined, the total construction and operation cost has to be evaluated with the system components and parameter uncertainties as many as possible. In this paper, the robust optimization approach of Bertsimas and Sim is applied in a hypothetical system to find a solution which remains feasible under the possible parameter uncertainties having the correlation effect between the uncertain coefficients. The system components to supply, treatment, and transport water are included in the developed water supply system and construction and expansion of the system is allowed for a long-range period. In this approach, the tradeoff between system robustness and total cost of the system is evaluated in terms of the degree of conservatism which can be converted to the probability of constraint violation. As a result, the degree of conservatism increases, the total cost is increased due to the installation of large capacity of treatment and transportation systems. The applied robust optimization technique can be used to determine a long-range water supply plan with the consideration of system failure.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2006년도 추계공동학술대회
• /
• pp.193-200
• /
• 2006

In case of domestic automobile manufacturers introduce and run a order production method, JIT system is to provide a necessary number of components for a right place timely which is a specific supply chain management is different from other occupations. This study is for establishing a efficient production planning and finding a management method to correspond with a manufacturing system and diversified supply chain management and building an information system to support it. For this, analyze the relevant business process and utilize various informations occur in supply chain of domestic automobile components manufacturer. It will contribute to not only reliability improvement of production management system but also satisfaction for due date of products.

• 전력전자학회논문지
• /
• 제11권3호
• /
• pp.233-238
• /
• 2006

전력 외란을 해결하기 위해서는 전력 계통의 전원 측과 부하 측 양단에서 전력 성분의 측정이 요구된다. 본 논문은 전원 측과 부하 측 양단에서 동시에 전력 성분을 측정하고 분석할 수 있는 DSP(디지털 신호 처리 장치) 기반의 다채널(전압 8채널, 전류 10채널) 전력 성분 측정 시스템을 제안하였다. 개발된 시스템은 YOKOGAWA 2558을 이용하여 전압과 전류를 보정한 후, 전력 계통 현장에서 실험하였다.

• KIEE International Transactions on Power Engineering
• /
• 제5A권3호
• /
• pp.214-220
• /
• 2005

In order to improve energy efficiency and solve power disturbances, power components measurement for both the supply and demand side of a power system must be implemented before appropriate action on the power problems can be taken. This paper presents a DSP (Digital Signal Processor)-based multi-channel (voltage 8-channel and current 10-channel) power measurement system that can simultaneously measure and analyze power components for both supply and demand. Voltage 8-channel and current 10-channel measurement is made through voltage and current sensors connected to the developed system, and power components such as reactive power, power factor and harmonics are calculated and measured by the DSP. The measured data are stored in a personal computer (PC) and a commercial program is then used for measurement data analysis and display. After voltage and current measurement accuracy revision using YOKOGAWA 2558, the developed system was tested using a programmable ac power source. The test results showed the accuracy of the developed system to be about 0.3 percent. Also, a simultaneous measurement field test of the developed system was implemented by application to the supply and demand side of the three-phase power system.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.177-187
• /
• 2002

In this paper, we consider a multi-factor, multi-cause decision making problem of supply chain. And we show how to measure the operational efficiency of the components in supply chain and also how to improve the efficiency of each component and whole supply chain. As a methodology, the data envelopment analysis (DEA) is adopted to measure the efficiency by considering weight factors such as flexibility, information sharing, logistics level, etc. The proposed algorithm allows whole supply chain to have the improved efficiency rate.

• 한국전자거래학회지
• /
• 제7권2호
• /
• pp.143-156
• /
• 2002

The objective of supply chain planning is to satisfy the requirements for minimizing inventory costs, transportation costs, and lead times throughout the supply, production and distribution stage dispersed geographically. Therefore, the supply chain planning system should have functionalities to resolve complex optimization problems that have characteristics of multi-stage and multi-product. Ant the system should also support collaborative decision making among distributed business partners. In this study, we proposed a distributed architecture for the supply chain planning system. To do this, we analyzed functional requirements by using IDEF-0(ICAM Definition-0) methodology, defined required components, and designed each component by using object-oriented methodology. We implemented a prototype system based on CORBA (Common Object Request Broker Architecture) to show that the proposed distributed architecture based on component technology is feasible and can solve supply chain planning problem collaboratively.