• KSBB Journal
• /
• v.24 no.6
• /
• pp.533-540
• /
• 2009

In this work, 5'-nitroindirubinoxime (5'-NIO) has been prepared as solid dispersions using a supercritical aerosol solvent extraction system (ASES) process in order to enhance its water solubility and dissolution rate. Solid dispersions of 5'-NIO and poly(vinyl pyrrolidone) (PVP) were prepared in various weight percent ratios. Three-component solid dispersions consisting of 5'-NIO, PVP, and poloxamer 188 (P188) were also prepared to study the influence of P188 level on their morphology, crystallinity, and dissolution behavior. All samples were prepared at $35^{\circ}C$ and 180 bar using supercritical carbon dioxide. The particle morphology and size of the two-component solid dispersions were found to be nearly spherical and much smaller (100-200 nm) compared with the original 5'-NIO. The morphology of three-component solid dispersions became more agglomerated as the level of P188 increased. The crystallinity of the original 5'-NIO was not observed in the solid dispersions prepared by the ASES process. Faster dissolution rates were observed for the three-componet solid dispersions because the arrangement of ethylene oxide and propylene oxide blocks of the poloxamer 188 enabled the formation of micelles in an aqueous phase.

• Korean Journal of Food Science and Technology
• /
• v.27 no.1
• /
• pp.68-73
• /
• 1995

Extraction yields of Hizikia fusiforme and Aloe vera Linne by supercritical carbon dioxide($SC-CO_{2}$) with and without ethanol as a cosolvent, and antimicrobial activities of the extracts against Escherichia coli, Bacillus subtilis, Saccharomyces cerevisiae and Alternaria sp. were determined. Both yield and solubility of the extracts from Hizikia fusiforme and Aloe vera Linne by $SC-CO_{2}$ with ethanol were two times greater than those by only $SC-CO_{2}$. All of the extracts demonstrated antimicrobial activities in the decreasing order of bacteria, yeast and fungus. The extracts by $SC-CO_{2}$ with ethanol showed almost the same degree of microbial growth inhibition as those by only $SC-CO_{2}$. Based upon these data, it was speculated that the components soluble in nonpolar solvent might be more responsible for the antimicrobial activity.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.6
• /
• pp.427-433
• /
• 2009

Volatile flavor compounds from the shoot and root of Angelica gigas Nakai were extracted by HE (Hydrodistillation extraction), SDE (Simultaneous steam distillation & extraction), and SFE (Supercritical fluid extraction system), and analyzed by GC-MS. The amount and the number of chemical components in essential oils from shoot and root by SFE was the higher than those by other extraction methods. Respectively, thirty one constituents were identified from the essential oil of the shoot and root by HE, twenty seven and twenty three constituents were identified from the essential oil of shoot and root by SDE, thirty one and forty five constituents were identified from the essential oil of shoot and root by SFE. The result showed large differences in extraction methods and in plant parts of Angelica gigas Nakai. Also, the bioactive compounds in root part was identified as nodakenin and decursinol (11.95% and 8.42%, respectively) by SFE. These results suggested that SFE was the best extraction method for the increasing of extraction yield, the determination of volatile components and the increasing of bioactive compounds in the shoot and root of Angelica gigas Nakai.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.3
• /
• pp.417-422
• /
• 1998

This study was performed to obtain information about the extraction conditions of lipids from microalgae, Spirulina platensis, using supercritical fluid $CO_2$. Regardless of extraction temperature conditions, the extracted lipid contents increased as pressure increased, but decreased at 8500 psi on each temperature. The highest yield of extracted lipid content showed in the condition of 5500psi at $50^{\circ}C$, and extracted lipid content was about $20\%$. In same pressure the contents of C18 : 2 and C20 : 0 increased as temperature increased, but fatty acids composition were $60\~75\%$ saturated, $12\~20\%$ monounsaturated and $13\~31\%$ polyunsaturated regardless of extraction conditions. The C18 : 3 was only detected in the condition of 5500psi at $50^{\circ}C$ but the content was very little.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.4
• /
• pp.212-230
• /
• 2001

Recent advances in recombinant DNA technology have resulted in development of many new protein drugs. Due to the unique properties of protein druges, they have to be delivered by parenteral injection Although delivery of protein drugs by other routes, such as pulmonary and nasal routes, has shown some promises, to date most protein drugs are administered by par-enteral routs. For long-term delivery of protein drugs by parenteral administration, they have been formulated into biodegradable microspheres. A number of microencapsulation methods have been developed, and the currently used microencapsulation methods are reviewed here, The microen-capsulation methods have been divided based on the method used. They are: solvent evapora-tion/extraction; phase separation (coacervation);spray drying; ionotropic gelation/polyelectrolyte complexation; interfacial polyumerization and supercritical fluid precipitation. Each method is de-scribed fro its applications, advantages, and limitations.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.246-251
• /
• 1990

A fuzzy control scheme has been proposed for a supercritical extraction process which has attracted much attention recently as a new separation technology. Based on the manual operation experience, three control pairs between manipulated and output variables are selected first and then seven membership functions are defined for control error and time rate of the error, respectively for each control pair, resulting in forty nine Fuzzy control rules. In addition to these, the membership functions are defined in two steps (coarse and fine) to enhance control performance. Fuzzy inference is performed using MAX-MTN composition rule and defuzzified control output is calculated based on center of gravity method. The prosed Fuzzy control scheme has been assessed through numerical simulation. As a result, the proposed scheme shows good control performance comparable with that by INA(inverse nyquist array) which usually requires complicated design procedure.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.516-519
• /
• 2000

Generally pancreas consist of lipid, water and protein, digestion enzyme complex (pro-tease, lipase, amylase). The sample used in this work was frozen dry and treated by a semi-batch flow type. In order to develop a supercritical fluid extraction process to rem-ove lipid from the pancreas, experiments were conducted at various operating conditions(pressure range $1500{\sim}2800psi$, temperature range $25{\sim}40^{cdot}C$, particle size$(0.25{\sim}1.0mm$, flow rate $20{\sim}80m{\ell}/min)$. Also cholesterol in the pancreas was removed. The highest extraction efficiency was 2500psi, $35^{\cdot}C$, 0.25mm of pancreas size. The enzyme activity of the pancreas produced from this work showed high value compared with imported pancreas.

• Clean Technology
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2020

Rapid expansion of supercritical solution (RESS) process was used to make molsidomine (MOL) loaded peracetyl-β-cyclodextrin (PAc-β-CD) nanoparticles, which were collected into the air. The effect of the concentration of the drug PAc-β-CD (0.5 and 1 wt%), extraction temperature (45 ~ 60 ℃), nozzle length (5 ~ 20 mm) and internal diameter (ID) (50 ~ 150 μm) of a capillary, and spray distance on the particle size and morphology of the resulting particles were investigated. The interaction of a drug and PAc-β-CD was confirmed by ¹H-NMR spectroscopy while the particle size was measured by means of a scanning electron microscope. It was found that increasing the temperature from 45 ℃ to 60 ℃ and decreasing the nozzle diameter from 150 μm to 50 μm had an increasing effect on the average particle size, while increasing the spray distance led to a decrease in the average particle size at a constant pressure of 34.5 MPa and temperature of 45 ℃. With 0.5 wt% of PAc-β-CD, the capillary nozzle of short length (5 mm) and small ID (50 μm) gave the smallest size (165 nm). The obtained nanoparticles showed increased dispersity and solubility in oil. The oil suspension of the inclusion complex showed increased sustainability, which can increase the in-vitro controlled release time of the drug.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1747-1752
• /
• 2012

This study investigated the physiochemical characteristics of Xanthoceras sorbifolia seed oil. Xanthoceras sorbifolia seed oil was extracted by supercritical fluid extraction (420 atm, $50^{\circ}C$), hexane extraction and heat-pressed extraction ($160^{\circ}C$, $180^{\circ}C$). Acid values and peroxide values were evaluated, as well as the degree of lipid oxidation. The heat-pressed ($160^{\circ}C$) extraction gave a $53.5{\pm}2.5%$ higher yield of oil, compared with the other extraction methods. The acid values from the super critical fluid extraction were the highest, while peroxide values were highest from the heat-pressed extraction at $160^{\circ}C$ (3.10 meq/kg). The contents of linolenic acid and oleic acid were 38.63~41.13% and 26.29~26.85%, respectively. Contents of stigmasterol and ${\beta}$-sitosterol were 6.01~6.49 mg/100 g and 58.19~59.85 mg/100 g, respectively. These results indicate that Xanthoceras sorbifolia seed oil can possibly serve as new edible oils.

• Korean Journal of Food Science and Technology
• /
• v.37 no.3
• /
• pp.431-437
• /
• 2005

Overall experiments were planned by central composite design, and results were analyzed by response surface methodology (RSM) to determine effects of three independent variables, temperature ($X_{1}$), extraction time ($X_{3}$), and pressure ($X_{3}$), on yield of sesame oil extract (Y). Regression equation model optimized by response surface analysis was: Y (sesame oil) = $-3.89+0.07X_{1}+0.03X_{2}+0.0006X_{3}-0.0007X_{1}^{2}-0.0002X_{2}X_{1}-0.00008X_{2}^{2}+0.000004X_{3}X_{1}+0.0000009X_{3}X_{2}-0.00000009X_{3}^{2}$. According to RSM analysis, optimum extracting conditions of temperature, time, and pressure were $45.89^{\circ}C$, 131.89 min, and 34228.41 kPa, respectively, and statistical maximum yield of sesame oil was 96.27%. Fatty acid composition of sesame oil showed sesame oil extracted by Supereritical Fluid $CO_{2}$ contained lower levels of palmitic, stcaric, and oleic acids and higher levels or palmitoleic and linoleic acids than commercial sesame oil. Commercial and extracted sesame oils were analyzed by electronic nose composed of 12 different metal oxide sensors. Obtained data were interpreted by statistical method of MANOVA. Sensitivities of sensors from electronic nose were analysed by principal component analysis. Proportion of first principal component was 99.92%. All sesame oils showed different odors (p < 0.05).