• 한국식품과학회지
• /
• 제41권1호
• /
• pp.37-41
• /
• 2009

포도가공 시 발생되는 부산물인 포도씨로부터 유용성분인 vitamin E 및 tocotrienol을 초임계 유체추출방법으로 최적화 하였다. 추출 온도(30-$50^{\circ}C$, $X_1$), 추출압력(17-25MPa, $X_2$) 및 추출시간(1-5 hr, $X_3$)을 변수로 반응표면 분석법으로 vitamin E 및 tocotrienol 함량을 측정하였다. 초임계 이산화탄소상에서 vitamin E 및 tocotrienol 함량은 추출온도, 압력 및 시간이 증가함에 따라 증가하였다 (plt;0.001). 각각의 추출조건 가운데 $40^{\circ}C$, 20 MPa 및 5 hr에서 vitamin E는 8.65 mg/100 g 그리고 tocotrienol은 7.88 mg/100 g으로 가장 높은 함량을 나타내었다. 반응표면분석에 의한 최적추출조건은 $40^{\circ}C$, 20.7MPa 및 3.8 hr으로 나타났으며, 이 때의 vitamin E 및 tocotrienol 함량은 각각 8.20 mg/100 g 및 7.42 mg/100 g으로 나타났다. Vitamin E 및 tocotrienol 함량에 대한 실측값은 통계적 예측값의 각각 99.27-106.10% 및 96.09-106.60%로 나타나 추출조건의 유효성이 인정되었다. 또한 유기용매 추출시 vitamin E 및 tocotrienol 함량은 각각 8.18 mg/100 g 및 7.24 mg/100 g이었다. 따라서 용매추출법과 초임계 이산화탄소 추출법을 비교했을 때 초임계 이산화탄소 추출법을 이용하는 것이 더 효과적으로 vitamin E 및 tocotrienol을 추출할 수 있을 것으로 판단되었다.

• 한국응용과학기술학회지
• /
• 제38권6호
• /
• pp.1687-1698
• /
• 2021

이 연구는 열역학적으로 불안정한 활성성분을 안정하게 봉입하기위해 초임계 상태에서 다중층의 리포좀을 생성하고 유효성분을 봉입하는 것에 관한 것이다. 초임계 상태에서 원활하게 리포좀을 형성시키기 위하여 식물성유래의 하이드로제네이티드 포스파티딜콜린과 그 유도체, 하이드로제네이티드 수크로오스다이스테아레이트를 포함하는 혼합 계면활성제를 고순도로 합성하였다. 이것을 반응조에 이산화탄소를 주입하여 초임계상태를 만들고 교반함으로써 거대 리포좀을 생성시키고, 여기에 제니스테인(genistein)과 쿼세틴(quercetin)을 첨가하여 봉입하는 제조방법에 대하여 기술하였다. 혼합지질계면활성제(SC-Lipid Complex)의 HLB는 12.50이었으며, 아주 낮은 농도에서도 다중층의 리포좀 소포체가 형성되었다. 이 계면활성제의 외관은 엷은 황색의 페이스트로 특이취가 있었으며, 비중은 0.972이었고, 산가는 0.12로 고순도로 합성이 되었음을 알 수 있었다. SC-Lipid Complex를 사용하여 20 wt%의 카플릭/카프릭 트리글리세라이드와 트리에칠헥사노인을 사용한 유화력 실험결과 96.2 %의 유화력을 가지고 있음을 알 수 있었다. 제니스테인을 봉입한 초임계 리포좀에 대하여 투과전자현미경(Cryo-TEM)을 통해 다중층의 리포좀 소포체가 형성되었다는 것을 확인하였다. 제니스테인이 봉입된 1차 리포좀화한 입자 크기는 253.9 nm이었고, 2차 캡슐의 크기는 18.2 ㎛ 이었다. 제니스테인을 표준물질로 하여 초임계 상태 리포좀의 봉입효율은 99.5 %이었고, 일반적인 리포좀은 93.6 %의 효율을 가지는 것으로 나타났다. 또한 쿼세틴을 봉입한 항산화력 실험은 DPPH법으로 확인한 결과 초임계리포좀에서 유의성 있게 우수한 항산화력을 유지하고 있음을 알 수 있었다. 이러한 결과를 바탕으로 효과는 우수하나 열역학적으로 불안정한 원료를 유기용매를 사용하지 않고 초임계 상태에서 리포좀에 봉입하고, 고기능성의 스킨케어 화장품, 메이크업 화장품, 두피보호용 화장품 등 다양한 제형에 응용이 가능할 것으로 기대한다.

• 한국해양환경ㆍ에너지학회지
• /
• 제19권1호
• /
• pp.52-61
• /
• 2016

대용량의 $CO_2$를 지중에 저장하기 위한 CCS(Carbon Capture and Storage)는 고압의 파이프라인 수송공정을 수반한다. 또한, 사고 및 유지보수와 같은 비정상상태가 발생할 경우 고압의 $CO_2$를 대기 중으로 방출시키는 감압공정이 필요하다. 본 연구에서는 고압 $CO_2$ 파이프라인에서의 감압현상을 수치해석적 방법을 이용하여 분석하였다. 수치계산 결과를 실험데이터와 비교분석함으로써 수치해석의 예측 능력을 검증하였다. 수치모델이 기체-액체 혼합 구간에서의 2상 감압현상을 잘 예측하였다. 그러나 초임계 액체 단상 감압과 기체 단상 감압현상에 대해서는 온도변화 등을 예측하는데 한계가 있음을 밝혔다.

• 한국건축시공학회지
• /
• 제14권1호
• /
• pp.68-75
• /
• 2014

In order to increase the integrity of the wellbore which is used to prevent the leakage of supercritical $CO_2$, it is necessary to develop a concrete that is strongly resistant to carbonation. In an environment where the concentration of $CO_2$ is exceptionally high, $Ca^{2+}$ ion concentration in pore solution of Portland cement concrete will drop significantly due to the rapid consumption of calcium hydroxide, which decreases the stability of the calcium silicate hydrate. In this research, calcium phosphates were used to modify Portland cement system in order to produce hydroxyapatite, a hydration product that is strongly resistant to carbonation under such an environment. According to the experimental results, calcium phosphates reacted with Portland cement to form hydroxyapatite. The formation of hydroxyapatite was verified using X-ray diffraction analyses with selective extraction techniques. When using dicalcium phosphate dihydrate and tricalcium phosphate, the 28-day compressive strength was lower than that of plain cement paste. However, the specimen with monocalcium phosphate monohydrate showed equivalent strength to that of plain cement paste.

• 한국수소및신에너지학회논문집
• /
• 제19권6호
• /
• pp.537-544
• /
• 2008

In this paper, flow characteristics of an adiabatic capillary tube in a transcritical $CO_2$ have been investigated employing the homogeneous model. The model is based on fundamental equations of mass, energy and momentum which are solved simultaneously. Two friction factors(Churchill) and viscosity(McAdams) are comparatively used to investigate the flow characteristics. Supercritical and subcritical thermodynamic and transport properties of $CO_2$ are calculated employing EES property code. Flow characteristics analysis of $CO_2$ adiabatic capillary tube is presented to offer the basic design data for the operating parameters. The operating parameters considered in this study include inlet temperature and pressure of an adiabatic capillary tube, evaporating temperature and inner diameter tube. The main results were summarized as follows : inlet temperature and pressure of an adiabatic capillary tube, evaporating temperature, mass flowrate and inner diameter of $CO_2$ adiabatic capillary tube have an effect on length of an adiabatic capillary tube.

• 한국수소및신에너지학회논문집
• /
• 제18권2호
• /
• pp.189-196
• /
• 2007

The evaporation heat transfer coefficient and pressure drop of $CO_2$(R-744) in a horizontal tube was investigated experimentally. The main components of the experimental apparatus are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and an evaporator(test section). The test section consists of a horizontal stainless steel tube of 4.57 mm inner diameter. The experiments were conducted at mass flux of $200{\sim}1000\;kg/m^2s$ saturation temperature of $0{\sim}20^{\circ}C$, and heat flux of $10{\sim}40\;kW/m^2$. The test results showed that the heat transfer coefficient of $CO_2$ has a greater effect on nucleate boiling more than convective boiling. Mass flux of $CO_2$ does not affect nucleate boiling too much. In comparison with test data and existing correlations, All of the existing correlations for the heat transfer coefficient underestimated the experimental data. However lung et al.'s correlation showed a good agreement with the experimental data. The evaporation pressure drop of $CO_2$ increases with increasing mass flux and decreasing saturation temperature. When comparison between the experimental pressure drop and existing correlations. Existing correlations failed to predict the evaporation pressure drop of $CO_2$.

• 한국표면공학회지
• /
• 제39권3호
• /
• pp.121-128
• /
• 2006

A set of Quartz Crystal Microbalances (QCM's) was used to observe the film removal characteristics of three different $CO_2-nitric$ acid microemulsions. QCM's electroplated with nickel or copper were used as specimens. F-AOT, NP-4 and the newly synthesized Proline Surfactant-1 were used as surfactants to create microemulsions. While the F-AOT microemulsion yielded a relatively low removal rate, that of the Proline Surfactant-1 completely removed the Cu metal film within a short period of time. The NP-4 microemulsion removed the metal surface. However, removal rate measurements per QCM were not possible due to the instability of the microemulsion when Cu ions were present in the nitric solution. The reaction kinetics and metal removal capabilities of microemulsions formed by the different surfactants are explained along with the characteristics of reverse micelles.

• Fisheries and Aquatic Sciences
• /
• 제17권1호
• /
• pp.59-65
• /
• 2014

We measured the reductions in size and solubility of mackerel muscle that was freeze-dried, deoiled by supercritical carbon dioxide (SC-$CO_2$), or roasted. The percent size reduction and solubility were high in SC-$CO_2$-treated muscle compared with freeze-dried and roasted muscle. We used oil-free residues to test for heavy metals and determine microbial safety. The SC-$CO_2$, hexane, and ethanol were used to separate oil from muscle. The concentrations of cadmium (Cd) in all treated muscles were less than the values reported in the literature, as were the concentrations of lead in SC-$CO_2$- and hexane- treated muscle. In contrast, concentrations of arsenic and mercury in muscles were greater than the reported values regardless of treatment. Zinc and iron, which are beneficial for health, were found in high levels after all treatments of muscle tissue. After 6 months of storage at different temperatures, SC-$CO_2$-and ethanol-treated muscle showed few bacterial colonies, and none were found after 4 months of storage at $-20^{\circ}C$. These results will be useful to food-processing industries for maintaining high-quality, safe mackerel muscle.

• 한국표면공학회지
• /
• 제48권5호
• /
• pp.218-226
• /
• 2015

The goal of this study is to investigate a metal cladding that contains SiC composites as a protective layer and analysis the characteristics of the specimens on high temperature oxidation To make SiC composites, the current process needs a high temperature (about $1100^{\circ}C$) for the infiltration of fixing materials such as SiC. To improve this situation, we need a low temperature process. In this study, we developed a low temperature process for making SiC composites on the metal layer, and we have made two kinds: cladding with protective SiC composites made by polycarbosilane(PCS), and a PCS filling method using supercritical carbon dioxide. A corrosion test at $1200^{\circ}C$ in a mixed steam and Ar atmosphere was performed on these specimens. The result show that the cladding with protective SiC composites have excellent oxidation suprression rates. This study can be said to have developed new metal cladding with enhanced durability by using SiC composite as protective films of metal cladding instead of simple coating film.

• 설비공학논문집
• /
• 제16권12호
• /
• pp.1134-1139
• /
• 2004

The evaporative heat transfer coefficient of $CO_2$ (R-744) in a horizontal tube was investigated experimentally. The experiments were conducted without oil in a closed refrigerant loop which was driven by a magnetic gear pump. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and evaporator (test section). The test section consists of a smooth, horizontal stainless steel tube of inner diameter of 7.75 mm. The experiments were conducted at mass flux of 200 to 500 kg/m$^2$s, saturation temperature of -5 to 5$^{\circ}C$, and heat flux of 10 to 40kW/m$^2$. The test results showed the heat transfer of $CO_2$ has a greater effect on nucleate boiling more than convective boiling. Mass flux of $CO_2$ does not affect nucleate boiling too much, and the effect of mass flux on evaporative heat transfer of $CO_2$ is much smaller than that of refrigerant R-22 and R-134a. In comparison with test results and existing correlations, correlations failed to predict the evaporative heat transfer coefficient of $CO_2$, therefore, it is necessary to develope reliable and accurate predictions determining the evaporative heat transfer coefficient of $CO_2$ in a horizontal tube.