• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.172-175
• /
• 1989

1.3${\mu}{\textrm}{m}$ surface-emitting GaInAsP/InP LED was fabricated by two-phase supercooling LPE technique. The lattice mismatch of the grown DH wafer was typically 0.03%. The processes involve SiO2 CVD, lithography, Zn diffusion, lift-off, lapping, annealing, and wire bonding. The fabricated LED shows the optical power of 600㎼ at 70mA driving current, differential resistance of 4$\Omega$, the f3dB of 35MHz, and the FWHM of 1040{{{{ ANGSTROM }}. The peak wavelength of the fabricated LED was at 1.29${\mu}{\textrm}{m}$(100mA).

• 한국식품과학회지
• /
• 제38권2호
• /
• pp.249-255
• /
• 2006

본 실험에서는 기존의 실험 방법인 Vail에 의해 고안된 drop freezing method에 의하여 빙핵활성을 측정하는 방법보다 정확한 빙핵활성을 연구하기 위하여 thermocouple을 사용한 Thermoelectric thermometry를 응용하여 장치를 제작하여 과냉각도와 과냉각 시간을 보는 방법으로 빙핵활성을 측정하였다. 본 실험에 사용된 균주는 KCTC에서 분양받은 Xanthomonas translucens KCTC 2751을 이용하여 균체 생장과 빙핵활성의 최적 조건을 검토하였다. 탄소원의 영향에서는, 1.0%(w/v) maltose에서, 질소원으로는 1.4% yeast extract(w/v)와 0.8% digested of gelatin(w/v), 무기 염류에서는 0.03% KCI, 온도와 초기 pH는 각각 $25^{\circ}C$, 6.5에서 균체 생장이 뛰어났고 과냉각도가 가장 높게 나타났다. 따라서 본 연구의 최적 배양 조건은 초기 배양 조건 보다 균체의 양은 5배나 증가하였으며 과냉각도도 $-1.76^{\circ}C$에서 $-1.36^{\circ}C$로 상승하였다. 그리고 Xanthomonas translucens KCTC 2751를 첨가한 증류수의 과냉각도는 균체를 첨가하지 않은 증류수의 과냉각도$(-7.9^{\circ}C)$보다 $6.54^{\circ}C$ 높게 나타났으며, 상업적으로 사용되는 빙핵제인 silver iodide를 첨가한 증류수의 과냉각도$(-1.56^{\circ}C)$ 보다 $0.2^{\circ}C$ 높게 나타났다. 동결 농축 실험은 균체를 첨가한 saccharose 수용액은 200 min 경과 후에는 동결 실험 전에 비하여 약 2.5배가 증가하였고, 동결 부분의 용질 농도는 약 30% 정도 로 감소하였는데 비해 균체를 첨가하지 않은 수용액은 약 2.1배가 증가하였고, 동결 부분의 용질 농도는 약 40% 정도로 감소하였다.

• 한국응용곤충학회지
• /
• 제60권2호
• /
• pp.193-199
• /
• 2021

벌목 개미과의 일본열마디개미는 국내 토착종이다. 지금까지 야외에서 이 종의 월동기작을 이해하기 위한 내한성 연구는 진행되지 않았다. 저온에서 다양한 온도별 노출시간에 따른 발육태별 저온 저항성을 조사하였다. 성충인 일개미가 다른 발육태와 비교하여 5℃와 10℃의 저온에서 높은 생존율을 보였으며, 급속내한성 유기 조건인 15℃에서 12시간 노출 후 내한성을 획득하였다. 급속내한성 유기는 10℃에서 최대 44%까지 생존율이 향상되었으며, 체내과냉각점과 체내빙점은 각각 -10.0℃에서 -14.2℃, -11.3℃에서 -15.3℃까지 낮아졌다. 저온처리는 저온 또는 스트레스 관련 유전자인 글리세롤 인산화효소와 열충격 단백질의 발현을 증가시켰다. 이상의 결과는 일본열마디개미의 내한성이 급속내한성 유기에 의해 야기된다는 것을 의미한다.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.104-111
• /
• 1997

The freezing phenomenon of saturated water with the supercooled region in a horizontal circular cylinder has been studied experimentally by using the holographic real time interferometry technique. From the experiments, it was found that there were three types of freezing patterns. The first is the annular ice layer growing from the cylinder surface at a high cooling rate; the next is the asymmetric ice layer at a moderate cooling rate; and the last is the instantaneous ice layer growth over the full region at lower cooling rate. As the water was coolde from room temperature to the subfreezing point passing through the density inversion point, the freezing pattern was largely affected by the inversion phenomenon, which had much effected the free convection and was susceptible to influences from the cooling rate. When the cooling rate is high, supercooling energy is released before the water is sufficientry mixed by free convection. On the other hand, when the cooling rate is low, there is much time for the water to be mixed by free convection. This seems to be the reason why the different ice layer growths occur.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.298-303
• /
• 2001

A fundamental study on the under water harvest-type ice storage system and its temperature characteristics in ice storage system was performed experimentally. The experiments were conducted by changing the inlet refrigerant temperature of an evaporator to analyzing the thermal fluid motion inside the ice storage tank. From the experimental results, the cold storage characteristics were investigated by measuring the axial and radial temperature variations inside the ice storage tank with respect to the inlet and outlet refrigerant temperatures of an evaporator. In case of the under water harvest-type ice storage system, thermal fluid. motion inside the ice storage tank was shown differently in comparison with that of other ice storage systems. During the cooling storage process, there was no supercooling phenomenon in the ice storage tank. These results show the characteristic of this system and the possibility of application to other fields.

• 대한기계학회논문집B
• /
• 제21권7호
• /
• pp.862-872
• /
• 1997

Ice formation in a horizontal circular cylinder has been studied numerically. From the numerical analysis results, it was found that there were three types of freezing pattern and that freezing phenomenon was affected largely by density inversion and cooling rate. The type of freezing pattern largely depends on the secondary flow which is generated by density inversion. When supercooling energy is released before the development of the secondary flow, the annular ice layer grows. If the energy is released when the secondary flow is considerably developed and the supercooled region is removed to the upper half part of the cylinder, an asymmetric ice layer grows. And if the energy is released after perfect development of the secondary flow, instantaneous dendritic ice formation over the full region occurs. Furthermore, this secondary flow was found to have an effect on heat transfer characteristics. The heat transfer rate becomes small at the instant when the secondary flow is generated, but becomes large with the development of the flow. It's concluded that for the facilitation of heat transfer it is desirable to keep water in liquid phase until the secondary flow is perfectly developed. This study gave an instruction of performance improvement of capsule type ice storage tank.

• Applied Microscopy
• /
• 제26권2호
• /
• pp.235-241
• /
• 1996

Amophization and decomposition behaviour in $Mg_{62}Cu_{26}Y_{12}$ alloy prepared by melt spinning method and wedge type metal mold casting method have been investigated by a detailed transmission electron microscopy. Amorphous phase has formed in melt-spun ribbon. In the case of the wedge type specimen, however, the amorphous phase has formed only around the tip area within about 2 mm thickness. The remaining part of the wedge type specimen consists of crystalline phases, $Mg_{2}Cu\;and\;Cu_{2}Y$. The supercooling for crystallization behaviour of the amorphous $Mg_{62}Cu_{26}Y_{12}$ alloy, ${\Delta}T_x$ has been measured to be about 60 K. Such a large undercooling of the crystallization bahaviour enables formation of the amorphous phase in the $Mg_{62}Cu_{26}Y_{12}$ alloy under the cooling rate of $10^{2}K/s$. The amorphous $Mg_{62}Cu_{26}Y_{12}$ has decomposed into crystalline phases, $Mg_{2}Cu\;and\;Cu_{2}Y$ after heat treatment at $170^{\circ}C\;and\;250^{\circ}C$.

• Journal of Pharmaceutical Investigation
• /
• 제40권spc호
• /
• pp.63-73
• /
• 2010

Solid lipid nanoparticles (SLNs) have emerged to combine the advantages of polymeric nanoparticles and lipid emulsions in early 1990s. SLNs can present several desirable properties derived from the solid state core. When formulating SLNs, there should be careful considerations about the physical state of the inner solid lipid core and its polymorphism and supercooling behavior. In this review, SLNs were compared to lipid emulsion and emulsion of supercooled melt to understand the unusual behaviors compared to lipid emulsions and to have insights into stability and release mechanism. SLNs have been regarded as biocompatible system because lipids are usually well-tolerable ingredients than polymers. Several studies showed good tolerability of SLNs in terms of cytotoxicity and hemolysis. Similar to various other nanoparticulate drug delivery systems, SLNs can also change biodistribution of the incorporated drugs in a way to enhance therapeutic effect. Most of all, large scale production of SLNs was extablished wihtout using organic solvents. Although there is no SLN product in the market till date, several advantagious properties of SLNs and the progress we have seen so far would make commercial product of SLNs possible before long and encourage research community to apply SLN-based formulations for water-insoluble drugs.

• 태양에너지
• /
• 제17권2호
• /
• pp.67-74
• /
• 1997

잠열 저장물질로서 비조화 축열재인 sodium acetate trihydrate를 사용하여 구형의 PCM 입자를 제조하였다. 비조화 축열재의 단점인 상분리 현상 및 과냉각 현상을 방지하기 위하여 점증제로서 gelatin, 조핵제로서 sodium pyrophosphate decahydrate를 사용하였다. 혼합조성의 용융 PCM을 이용하여 연속적으로 지름이 3-3.5 mm 인 구형 PCM 입자가 제조되었다. 용융 PCM 방출속도가 1.3-1.8 ml/min 인 범위 내에서는 PCM 입자크기가 방출속도에 영향을 받지 않았다. 제조된 PCM 입자의 물성을 측정하기 위하여 DSC, SEM과 XRD를 이용하였다.

• 센서학회지
• /
• 제28권6호
• /
• pp.341-344
• /
• 2019

Liquid crystal (LC) mesophase materials manifest a variety of phase transitions. The optical properties of LCs are highly dependent upon the phase and orientation of the optical axis with respect to the polarization of incoming light. Studying the LC phase transitions is significantly important for a wide range of scientific and industrial applications. In this study, we demonstrate the propagation velocity of the phase boundary between the nematic and isotropic phase of 4-Cyano-4-pentylbiphenyl (5CB) liquid crystal for different electric fields using a polarized optical microscope. The results demonstrate that the propagation velocity of the phase boundary exhibits a peak value for a specific voltage, attributed to the supercooling of the isotropic phase of the LC. The analysis of the propagation velocity for different electric fields also provides a simple optical platform to measure the thermal anisotropy and voltage dependent thermal properties of the homogeneously aligned LC.