• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.363-369
• /
• 2008

In the present work, the choice of the nano carbon black and optimum mixed ratio and effectiveness of the mixed carbon black to get a raw data for a manufacturing method of conductive complex board. Optimum mixed ratio of paper sludge & water was 1 : 2.5 for reformations. HB-41-Y was cheaper than Super-P with the single carbon black. Also electric conductivity of HB-41-Y($6.406{\times}10^{-2}\;{\Omega}cm^{-1}$) was about 6.5 times higher than Super-P($9.741{\times}10^{-3}\;{\Omega}cm^{-1}$) at 20 wt% carbon black. This time optimum mixture ratio of the paper sludge and the carbon black to be about 15 wt%, optimum mixed ratio HB-41Y and Graphite about 3:1 and its electric conductivity was $5.824{\times}10^{-2}\;{\Omega}cm^{-1}$.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.190-204
• /
• 2016

An active front end (AFE) is required for a three-phase induction motor (IM) fed by a voltage source inverter (VSI), because of the increasing need to derive quality current from the utility end without sacrificing the power factor (PF). This study investigates a proportional-plus-integral (PI) controller based AFE topology that uses a super-lift converter (SLC). The significance of the proposed SLC, which converts rectified AC supply to geometrically proceed ripple-free DC supply, is explained. Variations in several power quality parameters in the intended IM drive for 0% and 100% loading conditions are demonstrated. A simulation is conducted by using MATLAB/Simulink software, and a prototype is built with a field programmable gate array (FPGA) Spartan-6 processor. Simulation results are correlated with the experimental results obtained from a 0.5 HP IM drive prototype with speed feedback and a voltage/frequency (V/f) control strategy. The proposed AFE topology using SLC is suitable for three-phase IM drives, considering the supply end PF, the DC-link voltage and current, the total harmonic distortion (THD) in supply current, and the speed response of IM.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.593-594
• /
• 2005

Lithium-ion batteries have used the layered $LiCoO_2$ materials as cathodes, but Co is relatively toxic and expensive. In this regard, the spinel $LiMn_2O_4$ has become appealing because manganese is inexpensive and environmentally benign. In general, cathodes for lithium ion batteries include carbon as a conductive agent that provides electron transfer between the active material and the current collector. In this work, we selected Acetylene Black and Super P Black as conducting agents, and then carried out comparative investigation for the performances of the cells using different conducting agents with different particle size. As a consequence, Li/$LiMn_2O_4$ cells with Super P Black show better electrochemical performances than those with Acetylene Black.

• 자원리싸이클링
• /
• 제27권6호
• /
• pp.3-10
• /
• 2018

텅스텐은 고융점금속으로 주로 초경합금으로 사용되고 있다. 알칼리용액에서 텅스텐은 $WO{_4}^{2-}$로 존재하는데 용액의 pH가 감소함에 따라 중합반응이 일어나며 텅스텐산으로 침전된다. 따라서 원광석 및 2차 자원으로부터 텅스텐 회수를 위한 습식 제련 기술은 산침출과 알칼리침출로 대별된다. 2차 자원에 함유된 금속의 종류와 함유량 및 텅스텐의 소재화를 고려해서 2차 자원으로부터 텅스텐을 고순도로 회수하기 위한 공정을 선택해야 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.311-312
• /
• 2023

In this study, porous concrete with improved functionality was developed by using superabsorbent polymer (SAP) to provide rooting space for plants. The depth of settlement and mass change according to the substitution and addition rate of SAP were determined by investigating the functional performance of SAP and the volume change upon saturation. Test results indicated the depth of penetration settlement increased as the substitution rate of SAP increased, but the mass change could not be confirmed as the addition rate of SAP increased. The instability of the specimens due to the excessive volume change of SAP, as well as the osmotic pressure phenomenon according to the pH concentration, were identified as the cause. Therefore, future studies are needed to investigate the appropriate substitution and addition rate of SAP, as well as to reduce the osmotic pressure phenomenon according to the pH concentration, which would contribute to the improvement of the functional performance of vegetation concrete.

• Archives of Plastic Surgery
• /
• 제43권5호
• /
• pp.395-401
• /
• 2016

Background Some of the relatively newer, more efficacious, and potent topical wound dressing solutions include tetrachlorodecaoxide and super-oxidised solution. This study compares the efficacy and safety of these two drugs. Methods This is a block-randomised, double blind, parallel-arm, post-marketing study. One hundred fifty patients with ulcers (75 blocks uniform for sex, ulcer aetiology, diabetes mellitus, and wound area score) were randomised into the two treatment arms. Patients were observed for eight weeks with weekly assessments. One hundred and twenty patients completed the study. Wound healing was objectively assessed by measurement of wound area, scoring of wound exudation and tissue type, and using the pressure ulcer scale of healing Tool (validated for multiple wound aetiologies). Subjective improvement in pain was noted using a visual analogue scale. Both groups were compared using Mann-Whitney U test on all indicators. Results Difference in change in wound tissue type in the two groups was significant (${\alpha}$=0.05) by intention-to-treat (ITT) and per-protocol (PP) analysis at the end of week two (ITT and PP, P<0.001) and week four (ITT, P=0.010; PP, P=0.009). P-values for other comparisons were not significant (P>0.05). No study-related adverse events were observed. Conclusions Both drugs are efficacious. Tetrachlorodecaoxide yields healthy granulation tissue earlier. Both drugs appear to be safe for application.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권5호
• /
• pp.1803-1808
• /
• 2012

This study aimed to investigate the effects of Ser/Cys polymorphism in hOGG1 gene, Arg/Pro polymorphism in p53 gene, smoking and their interactions on the development of lung cancer. Ser/Cys polymorphism in hOGG1 and Arg/Pro polymorphism in p53 among 124 patients with lung cancer and 128 normal people were detected using PCR-RFLP. At the same time, smoking status was investigated between the two groups. Logistic regression was used to estimate the effects of Ser/Cys polymorphism and Arg/Pro polymorphisms, smoking and their interactions on the development of lung cancer. ORs (95% CI) of smoking, hOGG1 Cys/Cys and p53 Pro/Pro genotypes were 2.34 (1.41-3.88), 2.12 (1.03-4.39), and 2.12 (1.15-3.94), respectively. The interaction model of smoking and Cys/Cys was super-multiplicative or multiplicative, and the OR (95% CI) for their interaction item was 1.67 (0.36 -7.78). The interaction model of smoking and Pro/Pro was super-multiplicative with an OR (95%CI) of their interaction item of 5.03 (1.26-20.1). The interaction model of Pro/Pro and Cys/Cys was multiplicative and the OR (95%CI) of their interaction item was 0.99 (0.19-5.28). Smoking, hOGG1 Cys/Cys, p53 Pro/Pro and their interactions may be the important factors leading to the development of lung cancer.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.552-559
• /
• 2020

This paper presents an observer-based chattering free robust optimal control scheme to regulate the total power of a nuclear reactor. The non-linear model of nuclear reactor is linearized around a steady state operating point to obtain a linear model for which an optimal second order integral sliding mode controller is designed. A second order integral sliding mode observer is also designed to estimate the unmeasurable states. In order to avoid the chattering effect, the discontinuous input of both observer and controller are designed using the super-twisting algorithm. The proposed controller is realized by combining an optimal linear tracking controller with a second order integral sliding mode controller to ensure minimum control effort and robustness of the closed-loop system in the presence of uncertainties. The condition for the selection of gains of discontinuous control based on the super-twisting algorithm is derived using a strict Lyapunov function. Performance of the proposed observer based control scheme is demonstrated through non-linear simulation studies.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.463-468
• /
• 1999

The slurry wall of Inchon LNG receiving terminal tank will be planned the super flowing concrete having properties of high strength (required strength 520kg/$\textrm{cm}^2$), no-vibrating and massive structure in the underground. For the performance of this concrete, we investigate and select all materials, the optimum mix design and sensibility test in the laboratory. As test results, we choose portland blast-furnace slag cement and lime stone powder(L.S.P) as cementitious materials, W/C 41%(W/B 35.4%), S/a 50.8% and unit volume of coasre aggregate 0.30 as optimum mix design. Also test result of the fresh and hardened concrete are satisfied with specifications of slurry wall.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.369-374
• /
• 1997

This study is the experimental results on the flowing properties of the super flowing concrete (SFC) using limestone (LS), which is to develop the SFC in level of ordinary strength. And this study is described with respect to basic concept, confined water ratio ($\beta_p$) of binder (cement+limestone) in paste, relationship between volume ratio of water-binder (w/b) and addition ratio of superplasticizer in mortar, flowing velocity and funneling time and compressive strength in concrete to replacement ratio of LS. The results of this study is improved to flowing properties in fleshly concrete with increasing replacement ratio of LS. The optimal mixing condition of the SFC using LS in level of ordinary strength is proved W/C 55%, LS 40% and W/C 60%, LS 50%.