• The Plant Pathology Journal
• /
• v.18 no.5
• /
• pp.284-287
• /
• 2002

The antifungal activity of super reductive water (SRW) against plant pathogenic fungi was examined to extend its application to integrated pest management (IPM) for plant diseases. Diluted solutions ($\times$1/10, $\times$1/25, and $\times$1/50) of SRW inhibited fungal growth of kiwifruit soft rot pathogen, Diaporthe actinidiae, in a concentration dependent manner, When kiwifruits were inoculated on wounds with mycelium blocks, stock and diluted solutions successfully inhibited the disease development. In addition to the high pH of the SRW, fungistatic activity was also considered as the cause of the antifungal effect against the pathogen. Whereas conidial germination of Magnaporthe grisea was not affected by the diluted SRW solutions, appressorium formation was significantly inhibited in a concentration dependent manner, With little harmfulness to human health and environment SRW could be used to control plant pathogenic fungi, particularly appressorium-forming fungal pathogens.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.173-180
• /
• 2014

Fall-arrest system have been widely applied to provide a safe stop during fall incidents for occupational activities. This research object to evaluate the energy capacity of fall arrest shock energy absorber lanyard in relation to the used super fiber. In this work, shock energy absorber lanyard was prepared using high tenacity PET, high tenacity PET/P-aramid and high tenacity PET/UHMWPE, respectively. Dynamic load and static load tests based on the Korea fall protection equipment standard(Korea Occupational Safety & Health Agency standard 2013-13) were conducted. Maximum arrest force by dynamic load test of shock energy absorber showed below 6,000N. Also, static strength by static load test of lanyard and rope remains 15,000N and 22,000N for 1 min.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.14 no.1
• /
• pp.34-41
• /
• 1994

This experiment was carried out to select the $Sorghum{\times}Sudangrass$ hybrid of high productivity suited for soiling, and growth characteristics and productivity of 9 cultivars of introduced $Sorghum{\times}Sudangrass$ hybrids have been evaluated at the experimental forage field, College of Natural Science of Kon-Kuk university in Chungju over three years. The results obtained are summarized as follows : 1. NC855, Sordan79 and T. E haygrazer were taller than the other varieties as range from 209cm to 213cm. while Supergrazer was the shortest type as 173cm. Among the nine varieties used, NC855 and Pioneer 988 were classified as early maturing varieties, but G83F, FP5 and Supergrazer were classified as lately maturing varieties. 2. The stem diameter of Supergnzer and Sordan79 were thicker than the other varieties, while NC855, Garst757 and FP5 were thin. 3. The tillers of $Sorghum{\times}Sudangrass$ hybrids were ranged from 3.1 to 4.0 and NC855 and FP5 had 4.0 tillers per plant. The dead stubble of Sordan79 was the lowest as 4.0 percentage, while Supergrazer was the highest as 9.8 percentage(P<0.05). 4. GW9110G and T. E haygrazer were susceptible to lodging(P

• Proceedings of the KIEE Conference
• /
• 2004.05a
• /
• pp.62-64
• /
• 2004

P2P Systems have grown dramatically in recent years. Now many P2P systems have developed and been confronted by P2P technical challenges. We should consider how to efficiently locate desired resources. In this paper we integrated the existing pure P2P and hybrid P2P model. We try to keep roles of super peer in hybrid and concurrently use pure P2P model for searching resource. In order to improve the existing search mechanism, we present contents-based classification mechanism. Proposed system have the following features. This can forward only query to best peer using RI. Second, it is self-organization. A peer can reconfigure network that it can communicate directly with based on best peer. Third, peers can cluster each other through contents-based classification.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.311-322
• /
• 2010

The purpose of this study was to evaluate the bond strengths between IPS e.max Press and four different types of resin cements that often used for esthetic restoration. Disc shaped IPS e.max Press blocks(N=40, diameter: 12mm, thickness: 3mm) were fabricated according to the manufacture's instruction and cleaned with ultrasonic cleaner. They were embedded into an autopolymerizing acrylic resin. Fourty cylinder shaped resin block(Filtek Z350, diameter: 4.5mm, thickness: 3mm) were fabricated using a plastic tube. Each specimens were randomly divided into 4 experimental group and bonded each other using 4 different resin cements(Variolink II(light-cure), Variolink II(dual-cure), Calibra, Super-Bond C&B) according to the manufactures' recommendations. All the specimens were stored in normal saline at $37^{\circ}C$ for 24 hours before test. Universal testing machine at a crosshead speed of 1mm/min was used to evaluate the shear bond strength. The data were statistically analyzed using one-way ANOVA(P<.01). Multiple comparison was done by the Tukey HSD test. The shear bond strength of Super-Bond C&B to e.max was significantly lower than those of Calibra, Variolink II(light-cure), Variolink II(dual-cure) (P<.01). The shear bond strength of Calibra, Variolink II(light-cure), Variolink II(dual-cure) to e.max were not significantly different. The shear bond strengths of light-cure/dual-cure cement were higher than that of self-cure cement.

• The Journal of the Korean dental association
• /
• v.54 no.11
• /
• pp.865-873
• /
• 2016

Background/Purpose: The purpose of this study was to evaluate the effect of Nd:YAG irradiation on adherence of retrograde filling materials (mineral trioxide aggregate [MTA] and Super-EBA) by micro-computed tomography (CT) measurement and to observe the dentinal surface after irradiation by scanning electron microscopy (SEM). Materials and methods: Forty retrofilling models using extracted human teeth were divided into four groups according to the material and method used: ProRoot MTA (MTA group), Super-EBA (EBA group), MTA with Nd:YAG laser irradiation (LMTA group), and Super-EBA with Nd:YAG laser irradiation (LEBA group). All specimens were stored in 100% humidity for 24 hours until micro-CT was performed. The gap volume of the tooth/material interface was measured using the CTAn program. In six samples, the laser-irradiated dentin surface was observed using SEM. Results: The mean percent difference in gap volume was not statistically significant between the Nd:YAG laser-irradiated groups and non-irradiated in both materials(P > 0.05). The gap volume in the MTA group was significantly lower than that in the EBA group (P < 0.05). Examination of the non-irradiated specimens by SEM showed patent dentinal tubules. In contrast, alterations in the texture of the dentin surface and obliteration of the dentinal tubules were evident in the Nd:YAG laser-irradiated specimens. Conclusion: In this study, changes in the dentinal surface after Nd:YAG irradiation did not affect adherence between the apical filling material and the dentin wall.

• Journal of Embryo Transfer
• /
• v.11 no.3
• /
• pp.211-216
• /
• 1996

A series of experiments were designed to determine the feasibility of single dose of FSH as an effective superovulation method in rabbits. The superovulation treatments examined comparatively were as follows: 1) a single injection of 100 IU PMSG, 2) Multiple injections of 1 IU Super-OV of 2X daily for 3 days, 3) Multiple injections of 6.6 rng Folltropin-V 2X daily for 3 days, 4) Multiple injections of 13.3 rng Folltropn-V l$\times$ daily for 3 days, 5) Single injection of 40 mg Folltropin-V solved in 10% PVP, and 6) Single injection of 40 mg Folltropin-V dissolved in 25% PVP. The results obtained were as follows: The nurnher of ovulation points in the single injection of 40 mg Folltropin-V dissolved in 25% PVP and multiple injections of 6.6 mg Folltropin-V 2X daily for 3 days was averaged 44.6 and 39.2, respectively, which were significantly (P<0.05) more than in a single dose of PMSG or multiple doses of Super-OV. The number of total ova recovered in the single injection of 40 mg Folltropin-V dissolved in 25% PVP and multiple injections of 6.6 mg Folltropin-V 2X daily for 3 days was averaged 30.4 and 25.9, respectively, which were significantly (P<0.05) more than in the single dose of PMSG or multiple doses of Super-OV. A similar result was obtained for the number of fertilized ova recovered from the above six treatments. From the above results it was concluded that a single injection of 40 mg Folltropin-V dissolved in 25% PVP could be an effective and simple method for superovulation in rabbits.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.3
• /
• pp.45-50
• /
• 2014

In this paper, we propose a super-junction MOSFET (SJ MOSFET) fabricated through a simple pillar forming process by varying the Si epilayer thickness and doping concentration of pillars using SILVACO TCAD simulation. The design of the SJ MOSFET structure is presented, and the doping concentration of pillar, breakdown voltage ($V_{BR}$) and drain current are analyzed. The device performance of conventional Si planar metal-oxide semiconductor field-effect transistor(MOSFET), Si SJ MOSFET, and SiGe SJ MOSFET was investigated. The p- and n-pillars in Si SJ MOSFET suppressed the punch-through effect caused by drain bias. This lead to the higher $V_{BR}$ and reduced on resistance of Si SJ MOSFET. An increase in the thickness of Si epilayer and decrease in the former is most effective than the latter. The implementation of SiGe epilayer to SJ MOSFET resulted in the improvement of $V_{BR}$ as well as drain current in saturation region, when compared to Si SJ MOSFET. Such a superior device performance of SiGe SJ MOSFET could be associated with smaller bandgap of SiGe which facilitated the drift of carriers through lower built-in potential barrier.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.325-334
• /
• 2015

This paper deals with a control method for a hybrid energy storage system (ESS) with a battery and super capacitor for grid-connected operation. To improve the grid regulation and to minimize the depth of discharge of the battery, control algorithms for the hybrid ESS are proposed. A p-q control with predictive current control is used for the inverters for the super-capacitor and the battery. To verify the effectiveness of the proposed control method, simulation studies using the PSIM and RTDS are carried out for the actual grid model.

• Restorative Dentistry and Endodontics
• /
• v.39 no.1
• /
• pp.39-44
• /
• 2014

Objectives: The purpose of this study was to evaluate in vitro cytotoxicity of the pozzolan cement and other root-end filling materials using human periodontal ligament cell. Materials and Methods: Endocem (Maruchi), white ProRoot MTA (Dentsply), white Angelus MTA (Angelus), and Super EBA (Bosworth Co.) were tested after set completely in an incubator at $37^{\circ}C$ for 7 days, Endocem was tested in two ways: 1) immediately after mixing (fresh specimens) and 2) after setting completely like other experimental materials. The methods for assessment included light microscopic examination, cell counting and WST-1 assay on human periodontal ligament cell. Results: In the results of microscopic examination and cell counting, Super EBA showed significantly lower viable cell than any other groups (p < 0.05). As the results of WST-1 assay, compared with untreated control group, there was no significant cell viability of the Endocem group. However, the fresh mixed Endocem group had significantly less cell viability. The cells exposed to ProRoot MTA and Angelus MTA showed the highest viability, whereas the cells exposed to Super EBA displayed the lowest viability (p < 0.05). Conclusions: The cytotoxicity of the pozzolan cement (Endocem) was comparable with ProRoot MTA and Angelus MTA. Considering the difficult manipulation and long setting time of ProRoot MTA and Angelus MTA, Endocem can be used as the alternative of retrofilling material.