• Journal of the Korea Furniture Society
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2000

This study was carried out to investigate the effect of steaming on mechanical properties of heat-compressed wood specimens. The specimens for this mechanical strength tests were prepared to super-heated steam treatment after compression to the radial direction of sonamu (Pinus densiflora). The specimen's size is $50(L)mm{\times}20(R)mm{\times}17(T)mm$. Steaming temperature and treatment time is $120^{\circ}C$ and 20, 40, 60, 80, 100 minutes, respectively. Modulus of elasticity(MOE) in compressive test is directly proportional to steaming time. On the other hand, modulus of elasticity in bending test between steaming and not steaming after heat-compressed wood is similar irrespective of steaming time. The reason for this phenomenon is not clear yet.

• Food Science and Industry
• /
• v.53 no.4
• /
• pp.435-443
• /
• 2020

Korea has entered into an aged-society in 2018. If this trend continues to increase, it is expected that a super-aging society will take place by 2026. Therefore, Korea is placed in the situation of becoming the world's fastest aging nation as it becomes a super-aging society from an aged-society in twenty-six years. In order to provide an effective supply of nutrition for the socially weak, Japan developed a variety of foods with food texture improvements. Germany improved accessibility for meal service development. Senior-friendly food is a softened food or a highly concentrated drink, which is considered a texture-modified food, for the elderly with eating disorders to digest food more easily by making food particles smaller. Varying food processing techniques such as freeze-thawing enzyme impregnation, high-pressure processing, super-heated steam processing, 3D food print, and others used to produce texture-modified foods.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.415-418
• /
• 2008

This paper presents an innovative prototype of a new conceptual electromagnetic induction-based fluid beating appliance using voltage-fed type scries capacitor-compensated load resonant high-frequency IGBT inverter with a phase-shifted PWM and a power factor correction schemes. Its operating characteristics in steady-state are illustrated including unique features and evaluated on the basis of its computer simulation and experimental results of 10kw breadboard appliance for hot water producer and superheated steamer. The promising cost effective inverter-fed boiler appliances for electromagnetic induction-heated type fluid-heating in the pipeline systems are proposed for induction-heated boiler, super heat steamer, high temperature water producer, hot gas producer and metal catalyst heating for exhaust gas cleaning in engine, which are more suitable and acceptable for industrial, chemical, and consumer energy utilization for household and business from a practical point of view.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.5
• /
• pp.753-759
• /
• 2016

The processing properties of spent hen and broiler chicken were investigated before and after treatment to improve texture characteristics. Each treatment consisted steaming (S) with $85^{\circ}C$ for 20 min, Pulsed Electric Field (PEF) with 1.5 KV/cm for 4 sec, and Super Heated Steam (SH) with an oven temp. of $300^{\circ}C$, a steam temp. of $350^{\circ}C$ for 8 min. The yield of spent hen and broiler were 66.85% and 63.80% respectively in the control, but decreased in every treatment was lowest at 61.05% in the PEF treatment (p<0.05). In the color test, L value decreased, but the a and b values increased regardless of the species of spent hen or broiler. In the test of heating loss, the S treatment of spent hen had the highest result of 45.25% but lowest of 30.66% in the SH treatment of the broiler. When it was compared with various treatments, SH after PEF treatment showed the better result in terms of heating loss than the PEF or SH treatment respectively. In the test of texture, the broiler showed the lowest hardness of 5.57 kg in the SH (p<0.05). Otherwise, the spent hen resulted in 14.08 kg of hardness in steaming after PEF, but it improved significantly to 10.73 kg in SH after PEF. In the test of 9 scored sensory evaluation of overall palatability, 7.8 point was the best score with SH treatment in the broiler. The best score in spent hen was 6.3 point which was SH after PEF treatment. With this experiment, SH after PEF was the condition in the treatments to have the better texture of spent hen.

• Journal of Energy Engineering
• /
• v.12 no.2
• /
• pp.84-92
• /
• 2003

A one-dimensional thermal-hydraulic analysis computer program is developed for thermal sizing of a copper bonded steam generator. It is assumed that the conduction heat transfer of copper region between the hot side and the cold side tube is one-dimensional and its thermal resistance is derived as a function of a tube pitch. The flow regions of the water/steam side are divided into four regions: subcooled, saturated, film boiling, and super-heated. The number of tube selected ranges from 250 to 3500 and the pitch to tube diameter (P/D) ratios are 1.4, 1.6 and 1.8 for the parametric study calculation. The calculation results showed that when the number of tube was 2500, the length of the heating tube was about 12 m and the outside diameter of the steam generator was about 3 m. If the P/D ratio increases, the thermal resistance of copper component also increases, however the length of the heating tube is not so much increased.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.965-973
• /
• 1992

Boilers, which are considered to be one of the basic equipment in industry, consume large potion of nation's petroleum and their demand is growing everyday. In recent, the technology improvement in production of high efficiency boilers and their effective utilization is needed for design of boiler which steam condition is the large capacity of high temperature and high pressure. It is necessary that boiler control system be studied for high efficiency, high reliability and smooth operation. The control of drum pressure and water level particularly becomes an important task for greater accuracy with the avail ability of boiler operation. To achieve this aim, dynamic analysis of a boiler is accomplished by choosing a boiler as a model. Transfer function thus obtained is made a comparison of measurement with reckoning to technical design data. The results of comparison makes it possible to verify thermodynamical analysis on the dynamic behavior of the overall system.

• Food Science and Preservation
• /
• v.23 no.3
• /
• pp.369-377
• /
• 2016

This study was conducted to investigate the effects of superheated steam (SHS) on volatile compounds and the quality characteristics of onion. Onion samples were treated by SHS at various steam temperatures ($100{\sim}300^{\circ}C$) for 1 min. Thiosulfinates and pyruvic acid were reduced by SHS treatment. The absorbance values obtained for thiosulfinates, the odor-causing compounds in onions, treated by were 0.889, 0.085, 0.049, 0.049, and 0.045, while that of the untreated control sample was 1.587. The pyruvic acid contents of onions treated by SHS were 7.57, 5.85, 1.66, 0.47, and 0.26 mg/mL, while that of the untreated control sample was 8.00 mg/mL. Volatile compounds such as, dipropyl trisufide, 1,3-propanedithiol, methyl thiirane, methyl propyl trisulfide, diallyl disulfide, 1-(methylthio)-1-propene, 1,1-thiobis-1-propene, 1,1-sulfinyl bispropane, dimethyl tetrasulfide, methyl propenyl disulfide, dimethyl trisulfide, and diallyl disulfide were reduced by SHS treatment. The results showed that antioxidant activities in the of onion samples were improved by SHS treatment. The hardness and chewiness of onions treated by SHS were significantly lower than those of the untreated control onion sample. Sensory evaluation suggested that SHS could help lower off-flavors in and enhance the palatability of onions. These results suggest that the application of SHS treatment to onions can decrease their off-flavors, change their textural attributes, and promote their sensory properties.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.9-18
• /
• 2004

This study was carried out to find the efficient methods for preventing resin exudation from spruce board during high temperature environment service.In the dry-air oven test, in-use temperature related to resin exudation of 110℃ could be obtained by the appropriate kiln drying without any special treatment, and the in-use temperature of the radio-frequency/vacuum (RF/V)-dried boards was about 20℃ higher than that of the conventional kiln-dried boards.In the autoclave test, resin exudation was not found from any board dried in the conventional kiln and in the RF/V kiln after the low pressure steam explosion (SE) treating, while for the control resin exudations were more severe in the autoclave test above 130℃ than in the dry-air oven test. It, therefore, would be suggested that resin exudation during high temperature service condition can be prevented more effectively by super-heated steaming green boards than by high-temperature drying boards with low moisture.