• ETRI Journal
• /
• v.37 no.5
• /
• pp.951-960
• /
• 2015

For a conventional power metal-oxide-semiconductor field-effect transistor (MOSFET), there is a trade-off between specific on-state resistance and breakdown voltage. To overcome this trade-off, a super-junction trench MOSFET (TMOSFET) structure is suggested; within this structure, the ability to sense the temperature distribution of the TMOSFET is very important since heat is generated in the junction area, thus affecting its reliability. Generally, there are two types of temperature-sensing structures-diode and resistive. In this paper, a diode-type temperature-sensing structure for a TMOSFET is designed for a brushless direct current motor with on-resistance of $96m{\Omega}{\cdot}mm^2$. The temperature distribution for an ultra-low on-resistance power MOSFET has been analyzed for various bonding schemes. The multi-bonding and stripe bonding cases show a maximum temperature that is lower than that for the single-bonding case. It is shown that the metal resistance at the source area is non-negligible and should therefore be considered depending on the application for current driving capability.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.162-162
• /
• 2006

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.1-7
• /
• 1995

In this paper, we decribed the basic elements required for the practical usage of super flowing concrete. The flowability and filingability of fresh concrete was measured by using six different testing methods. Also, two actual size members were used for investigating characteristics of the hardened concrete through variious experiments. As the result of the experimentation, the developed super flowing concrete shown high flowability and fillingability good enough for the requirement. Furthermore, inner uniformity of the no-vibrated concrete was verified by testing distribution of aggregates and core cylinders. Therefore, quality control and workability of concrete can be secured by using the super flowing concrete even without vibrating However, it ha been felt that development of easy evaluation methods for the super flowing concrete is in need.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.5
• /
• pp.79-84
• /
• 2009

Super duplex stainless steel has long life in severe environments by showing the enough strength and corrosion resistance. Therefore, the fracture mechanics approach needs to support the structural strength integrity for the used material. In this study, fatigue crack propagation behavior was investigated to super duplex stainless steel with 0.2% nitrogen. The various volume fraction and distribution of austenite structure for applied specimen in test were obtained by changing the heat treatment temperature and cycle. From test results, fatigue crack propagation rate showed two kinds of tendency between da/dN and ${\Delta}K$ according to distribution of austenite structure and structure anisotropy.

• Journal of Korea Multimedia Society
• /
• v.12 no.7
• /
• pp.979-988
• /
• 2009

Illegal reproductions and subsequent copyright infringement have curtailed development of digital content industry. Many DRM systems have been developed and utilized for this purpose. However, current DRM system allow only authorized user to access the contents, and as such, redistribution to other user without getting license again entails cumbersome process. Currently, super-distribution system which can be used for redistribution of downloaded contents in more streamlined fashion is being widely conducted. But for streaming type content, it is still very difficult to redistribute with super-distribution system because the client must directly connect to streaming server to access the content. Accordingly, a new DRM streaming service structure is required to allow streamed contents to be redistributed as easily as the downloaded contents. In this paper, we proposed the relay file structure that can connect the streaming server and the user for super-distribution of the streaming contents.

• Journal of the Korean housing association
• /
• v.12 no.1
• /
• pp.21-31
• /
• 2001

This study was conducted to analyze the status of apartment informationalization through the research of distribution of super express network, apartment home pages and Inhabitants awareness. 1st. The construction business launched the full-scale apartment informationalization in 1999. Since then, the infomationalization has been developed multilaterally while the apartment home pages are playing a major role in cooperation with construction business and Internet business. The academic interest and research on the informationalization, however, are not enough. 2nd. The distribution of super express network, which is based on the informationalization is accelerated by the government policy. Especially in our country where the apartment is the major type of housing, we have favorite environment for the informationalization and can create our own housing culture. 3rd. The number of the apartment home pages now is increased to over 6,000, but its contents, know-how, and technique to build the system have not been advanced enough. 4th. So far the home pages have not been able to function well enough to strengthen the community awareness and are likely to result in the unbalanced informationalization. 5th. The study shows that residents interest in the computer and the Internet is fairly high. The utilization of the Internet is varied according to the age, sex, occupation, academic background, income and so forth. Especially they are not as interested in the housing informationalization as in the general information, but the preference of the apartment home pages and the super express network is so tremendous that its distribution will keep the momentum.

• Journal of Distribution Science
• /
• v.13 no.2
• /
• pp.85-94
• /
• 2015

Purpose - This study attempts to examine the impacts of consumers' perceived service convenience of retailers on various service performance metrics such as service quality and customer satisfaction. It also tries to investigate differences in the importance of service convenience dimensions on service performance between a department store and a general super market. Research design, data, and methodology - The four hypotheses in this study were proposed and tested. Two hypotheses were on the causal relationships between service convenience dimensions and service performances (service quality and customer satisfaction). The other two hypotheses were on comparisons for the effects of convenience dimensions on service quality and customer satisfaction between department stores and general super markets. To test the hypotheses, three department store chains (Hyundai, Lotte, and Shinsegae department Store) and three general super markets (E-mart, Homeplus, and Lotte mart) were involved. Overall, 510 usable responses were used. The data were analyzed using regression analysis. Results - The results largely support the hypothesized relationships of the proposed model. The results show that access convenience, transaction convenience, benefit convenience, and post-benefit convenience have positive influences on service quality, whereas decision convenience, access convenience, transaction convenience, benefit convenience, and post-benefit convenience have positive effects on customer satisfaction. Furthermore, the results show that there are differences between department stores and general super markets in the effects of benefit convenience and post-benefit convenience on service quality as well as the effects of transaction convenience and post-benefit convenience on customer satisfaction. Conclusions - The concept of service convenience is important in retail environments but little is known about this topic in retail literature. Specially, while service convenience dimensions have different impacts on service performance in distinct retail environments, there has been little investigation or comparison between retail types as regards service convenience. This study is the first to test the differences between distinct retail types (department stores and general super markets) on the service convenience-service performance links. Managerially, the findings of this study suggest that the service convenience management of retailers is an important part of successful service performance management. Because it is most important that both department stores and general super markets enhance benefit convenience to improve service performance, managers of both store types need to invest their resources to reduce consumers' perceived time and effort expenditures to experience the retailer's core benefits. Therefore, the results of this study suggest that retail stores should spend human and financial resources to enhance customer perceptions of service convenience, while also considering what constitutes the service outcome in the consumer's mind. Furthermore, the findings suggest that managers need to use different service convenience management tactics in department stores and general super markets. Specifically, managers in general super markets should pay more attention to benefit convenience and transaction convenience to achieve better service performance whereas managers in department stores should concentrate on post-benefit convenience to create customers' positive evaluation.

• Korean Journal of Remote Sensing
• /
• v.39 no.4
• /
• pp.459-466
• /
• 2023

In the last decade, artificial intelligence's dramatic advancement with the development of various deep learning techniques has significantly contributed to remote sensing fields and satellite image applications. Among many prominent areas, super-resolution research has seen substantial growth with the release of several benchmark datasets and the rise of generative adversarial network-based studies. However, most previously published remote sensing benchmark datasets represent spatial resolution within approximately 10 meters, imposing limitations when directly applying for super-resolution of small objects with cm unit spatial resolution. Furthermore, if the dataset lacks a global spatial distribution and is specialized in particular land covers, the consequent lack of feature diversity can directly impact the quantitative performance and prevent the formation of robust foundation models. To overcome these issues, this paper proposes a method to generate benchmark datasets by simulating the modulation transfer functions of the sensor. The proposed approach leverages the simulation method with a solid theoretical foundation, notably recognized in image fusion. Additionally, the generated benchmark dataset is applied to state-of-the-art super-resolution base models for quantitative and visual analysis and discusses the shortcomings of the existing datasets. Through these efforts, we anticipate that the proposed benchmark dataset will facilitate various super-resolution research shortly in Korea.

• The Journal of the Korean life insurance medical association
• /
• v.3 no.1
• /
• pp.103-141
• /
• 1986

The present study was undertaken to establish the decision standard of builds for the insured by using the ratio of weight-for-height as build index. Materials being examined were the ratio of weight-for-height being calculated from the actually measured heights and weights of a total of 15,838 insured persons who were examined medically at Honam Medical Department of Dong Bang Life Insurance Company, Ltd. from June, 1979 to September, 1985. The ratio of weight-for-height is calculated by the following formula. The ratio of weight-for-height(%)=$\frac{weight(kg){\times}100}{\{height(cm)-100\}{\times}0.9(kg)$ The results were as follows: 1. The distribution of the ratio of weight. for-height of the 15,838 insureds follows Log normal distribution being skewed to the left(the direction of underweight). 2. The ratio of weight-for-height were Log transformed to lead to a sym metrical pattern of distribution in which statistical rules are known to be applied more exactly. Thereafter, the establishment of dicision standard of builds was undertaken by using the log of the ratio of weight-for-height as build index. Through all ages in male, the ratio of weight-for-height indicating the range of standard lives including slight overweighted and underweighted lives besides normal lives is 80-130%, and corresponds to $"M-2{\delta}"-"M+1.5{\delta}"$ and to $M{\pm}20%$ ; in female, 85-135%, and corresponds to $"M-2{\delta}"-"M+1.5{\delta}"$ and to $M{\pm}20%$. Through all ages in male, the ratio of weight-for-height indicating the initial level of super-overweighted and super-underweighted lives is 130-150% and 75-80%,and corresponds to $M+3{\delta}\;and\;M-3{\delta}$ and to M+40% and M-25% respectively;in female, 140-160% and 75-80%, and corresponds to $M+3{\delta}\;and\;M-3{\delta}$ and to M+40%-+50% and M-25% respectively. 3. Author's rating table model for builds(a table of weight per height) is proposed. On the table, the ratings for builds, i. e. standard, super-weighted and super-underweighted lives, are listed.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.531-533
• /
• 2000

배전계통에서 전력전자 설비의 증가는 고조파 왜곡현상과 더불어 그로 인해 발생되는 계통 설비와 운용에 미치는 영향에 대한 관심의 증대를 가져오게 하였다. 그러므로, 최근에 고조파 연구는 전력계통의 분석과 설계에 있어 중요한 관점이 되고 있다. 고조파와 관련된 컴퓨터 시뮬레이션들은 전력계통에서 전압 왜곡현상을 나타내는 방법으로 사용되어져 왔으며, 많은 디지털 컴퓨터 프로그램들이 고조파 분석을 위해서 사용되고 있다. 주파수 스펙트럼 분석에 있어서, SuperHarm을 이용한 컴퓨터 시뮬레이션은 다른 프로그램을 사용하는 것보다 효과적인 방법이다. 본 연구에서는 SuperHarm을 이용한 컴퓨터 시뮬레이션으로 비선형 부하인 가변속 구동장치의 부하 변동에 따른 고조파 전압 분포를 살펴보고, 고조파 저감을 위해 필요한 최적의 고조파 필터를 설계하였다.