0.2% N을 첨가한 수퍼 2상 스테인리스강의 열처리 조건에 따른 특성 평가 - 제2보: 피로균열진전 거동

Characteristic Evaluation according to Heat Treatment Conditions of Super Duplex Stainless Steel with Additive 0.2% N - Part 2: Fatigue Crack Propagation Behavior

  • 발행 : 2009.10.31

초록

Super duplex stainless steel has long life in severe environments by showing the enough strength and corrosion resistance. Therefore, the fracture mechanics approach needs to support the structural strength integrity for the used material. In this study, fatigue crack propagation behavior was investigated to super duplex stainless steel with 0.2% nitrogen. The various volume fraction and distribution of austenite structure for applied specimen in test were obtained by changing the heat treatment temperature and cycle. From test results, fatigue crack propagation rate showed two kinds of tendency between da/dN and ${\Delta}K$ according to distribution of austenite structure and structure anisotropy.

키워드

참고문헌

  1. 강창룡, 김익수 (2001). "수퍼 2상 스테인리스강의 $\sigma$상 석출에 관한 연구", 열처리공학회지, 제14권, 제5호, pp 286
  2. 강흥주 (2008). 수퍼 2상 스테인리스강의 부식, 피로균열진전과 음향방출 특성, 부경대학교 박사학위 논문
  3. 강흥주, 남기우, 안석환, 강창룡, 도재윤, 박인덕 (2003). "수퍼 2상 스테인리스강의 부식 저항성에 관한 연구", 한국해양공학회지, 제17권, 제2호, pp 40-46
  4. 김수천, 강창룡 (2009). "수퍼 2상 스테인리스강의 미세조직 및 기계적 성질에 미치는 시효의 영향", 한국해양공학회지, 제23권, 제3호, pp 40-45
  5. 도재윤, 이상기, 안석환, 남기우, 강창룡, 박인덕 (2001). "수퍼 2상 스테인리스강의 피로균열 진전시 발생하는 음향방출신호 특성에 미치는 $\sigma$상 석출의 영향", 대한금속재료학회지, 제39권, 제12호, pp 1339-1405
  6. 도재윤, 이상기, 안석환, 남기우, 강창룡 (2001). "오스테나이트 분포에 따른 수퍼 2상 스테인리스강의 기계적 특성과 피로균열진전거동", 열처리공학회지, 제14권, 제4호, pp 205-211
  7. 일본재료학회 (1993). 재료강도학, pp 123-129
  8. 안석환, 강흥주, 남기우 (2008). "수퍼 2상 스테인리스강의 열처리 조건에 따른 피로균열전파거동 및 부식특성", 2008년도 한국해양과학기술협의회 공동학술대회 초록집, 제주 국제 컨벤션 센터, pp 343
  9. 이상기, 도재윤, 남기우, 강창룡, 이해우, 안석환 (2000). "수퍼 2상 스테인리스강의 피로균열진전 특성에 미치는 미세조직의 영향", 한국해양공학회지, 제14권, 제2호, pp 66-70
  10. 이상기 (2001). 수퍼 2상 스테인리스강의 $\sigma$상 석출에 따른 피로균열진전특성과 음향방출신호의 시간-주파수 해석, 부경대학교 석사학위논문
  11. 주동원, 성장현 (1997). "수퍼 2상 스테인리스강의 열처리 조건 변화에 따른 첨가 원소 질소의 거동", 열처리공학회지, 제10권, 제1호, pp 30-39
  12. 쿠니오타케시, 나카자와 하지메, 하야시 이쿠히코, 오카무라 히로유키 (1988). 파괴역학실험법, 조창서점
  13. ASTM E-399-78
  14. Cui, J., Kang, C.Y., Miyahara, K. and Park, I.S. (2001). "Degradation of Impact Toughness due to Formation R Phase in High Nitrogen 25mass% Cr-Ni-M0 Duplex Stainless Steel", ISIJ International, Vol 41, No 2, pp 192-195 https://doi.org/10.2355/isijinternational.41.192
  15. Davis, J.R. (1994). ASM Specially Handbook Steels, ASM International, Oh, pp 13
  16. Kim, S.C., Zhang, Z., Furuya, Y., Kang, C.Y., Sung, J.H., Ni, Q.Q., Watanabe, Y. and Kim, I.S. (2005). "Effect of Precipitation of σ-Phase and N Addition on the mechanical properties in 25Cr-7Ni-4Mo-2W Super Duplex Stainless Steel", Materials Trans., Vol 46, No 7, pp 1657-1662