• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.932-935
• /
• 2007

모바일 기기 사용이 급증함에 따라 모바일환경에서 이루어지는 P2P방식 연구가 활발히 진행되고 있다. 본 논문에서는 기존의 모바일환경에서의 P2P방식이 지닌 peer들 사이의 multi-broadcasting 방식의 문제점을 보완하고, 새로운 routing table을 구축하기 위해 peer들을 2개의 계층으로 구분하였다. 즉, peer들을 super peer들과 각 super peer에 의해 관리되는 sub peer들로 구분하였다. 파일의 탐색과 전송은 super peer들이 관리하므로, 기존의 불필요한 multi-broadcasting 방식을 피할 수 있다. 본 논문에서는 분산 네트워크를 위한 peer의 계층화 작업을 설계하였다. MIS(Maximal Independent Set)알고리즘을 이용하여 peer들의 계층화 작업을 외부의 도움 없이 peer들간의 통신으로 할 수 있게 만들었다. 이처럼 peer들을 super peer와 sub peer로 구분하면 불필요한 broadcasting을 피할 수 있어 시스템 성능이 향상되며, 이를 실험을 통하여 증명하였다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.131-132
• /
• 2021

In this study, as part of the study to reduce and integrate heat of hydration of concrete, the performance change of super retarding agent is examined in the mortar area under high temperature conditions. It was confirmed that the setting time delay can be adjusted from several hours to several days depending on the high temperature and the change of super retarding agent mixing rate. With the increase of super retarding agents, the early age strength was delayed while at 28 days the use of super retarding agent results in an increase of strength remakably.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.217-218
• /
• 2023

This study is to develop porous concrete using super absorbent polymer, which possesses insolubility and high absorption capacity, as a substitute material for lightweight soil. Various mixtures were prepared using aggregates, cement, mixing water, and super absorbent polymer, and the absorption ratio and compressive strength were examined for each mixture. As the amount of super absorbent polymer added increased, the absorption ratio also increased, reaching up to 35-105%. However, the compressive strength decreased by 49.5% to 65.3%. This is believed to be due to the inherent properties of super absorbent polymer, which led to an increase in the absorption ratio but, in turn, reduced the binding strength of cement paste particles, resulting in a decrease in compressive strength.

• Journal of Korea Port Economic Association
• /
• v.18 no.1
• /
• pp.3-26
• /
• 2002

The purpose of this paper is to Investigate the productive efficiency and competitive strength of world container ports using the DEA, Super-efficiency, and FDH methods with the raw data from previous research by Jun et al.(1993). The super-efficiency measure examines the maximal radial change In input, outputs for an observation to remain efficient. Therefore, it provides a means of distinguishing between efficient observations, which would otherwise seem identical. FDH provides a good test mechanism for examining the practical implications of the choice available among alternative efficiency measures and orientations, because of the lack of convexity of its production possibility set. Both methods are complementary to DEA. This paper follows the traditional productivity analysis method overcoming the limitation of previous studies by using the DEA, FDH and Super-efficiency methods, and proposing in measure the relative competitive strength of worldwide container ports. The main empirical results of this paper are as follows: Firstly the ports of Singapore, Hongkong, Kilrung, Busan, Tokyo. and Longbeach were found to be efficient In the CCR model. The ports of Felixstowe, Bangkok, Singapore, Hongkong, Kilung, Busan, Tokyo, and Longbeach were found to be efficient in the BCC model. Secondly, super. efficiency rankings under CRS and input-oriented model are as follows: Longbeach, Keelung, Singapore, Busan, Tokyo, and Honkong. However, it was difficult In differenciate the rankings under the VRS and input-oriented model. due to major difficulties posed by the ports of Singapore, Hongkong, and Longbeach. Thirdly, the FDH method shows that the inefficient ports are Bremerhaven, Antwerp, Le Havre, Kobe, Seattle, New York The policy Implications of this study are as follows: Firstly, when port authorities want to measure the international competitive strength of container ports and enhance their productive efficiency, they should consider the traditional method as well as introducing the Super-efficiency and FDH methods. Secondly, according to the analysis results of the super-efficiency and FDH methods, poll authorities should recommend benchmarks ports and dominated ports as reference ports in order to enhance the productive efficiency of their container ports that have an efficiency rating of less than 1. Efficient ports whose efficiency ratings are over 1 in the Input-oriented Super-efficiency model should also consider the usage of input and output elements used by more efficient ports.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.589-596
• /
• 2002

In this paper, setting and strength performances of concrete containing saccharic type super retarding agents are investigated under various kinds and contents of super retarding agents. According to test results, as super retarding agents contents increase, slump shows to be increased, while air contents decrease about 1∼2％. Setting time shows to be retarded considerably with increase of super retarding agents. It takes 20 days after mixing to reach final setting in case of concrete containing gluconic acid more than 0.3％. And 10 days after mixing in case of enhancing sucrose, white and brown sugar. Compressive strength of concrete containing super retarding agents is lower than that of plain concrete at early age. However, it keeps up with and exceeds the compressive strength of plain concrete at later age. White sugar md brown sugar shows positive performances in delaying setting time and strength compared to existing super retarding agents. n further investigations on durability are conducted, it is thought that application of white sugar as super retarding agent is available.

• The korean journal of orthodontics
• /
• v.24 no.2
• /
• pp.433-445
• /
• 1994

Bonding of brackets is one of the essential factors for successful orthodontic treatment' so bond strength of orthodontic adhesives are very important. The purposes of this research were to compare shear bond strength of various orthodontic adhesives and to evaluate failure sites. One-hundred twenty extracted human first premolars were prepared for bonding and premolar brackets were bonded to prepared enamel surfaces with Super C Ortho, Mono-$Lok^2$, Transbond, and Super C Ortho after applying Fluorobond. After bonding of brackets, teeth specimens were divided into 3 groups. In group 1 specimens were stored at humidor $37^{\circ}C$ in 1 hour, in group 2 specimens were stored at humidor $37^{\circ}C$ in 24 hours, thermocycled 10 times and in group 3 specimens were stored at humidor $37^{\circ}C$ in 24 hours, thermocycled 1800 times. Then the universal testing machine Instron 6022, Instron Co., U.S.A. was used to test the shear bond strength of brackets to enamel. After debonding, brackets and enamel surfaces were examined under stereoscopic microscope to determine the failure sites The results were as follows : 1. Shear bond strength was significantly highest of using Super C Ortho after applying Fluorobond and Super C Ortho In group 1, was highest of using Super C Ortho in group 2, and was highest of using Mono-$Lok^2$ in group 3. 2. According to time and temperature change, in using Super C Ortho the group 2 had significantly highest strength and group 3 had lowest strength, in using Mono-$Lok^2$ the group 2 and had higher strength than group 1 and in using Super C Ortho after applying Fluorobond shear bond strength decreased constantly, 3. The failure sites were tooth-resin interface in Super C Ortho after applying Fluorobond, Mono $Lok^2$ and Transbond and were at almost same ratio bracket base-resin interface and tooth-resin interface in Super C Orth.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.63-69
• /
• 2010

Recently, by the increase of demand on Super High-rise mixed-use housing and it's advanced quality, the interest on it has been raised socially. In accordance with it, the matter of resident's health and energy efficiency has been controversial in terms of living in super high-rise housing. This study started from the idea that it is necessary to have an objective data which that has many residents in narrow space with high density. The purpose of this study are as follows; Firstly, with the quantitative data analysis on energy, it will confirm the objective information on the unclear negative idea of super high-rise mixed-use housing. Secondly, it will establish the fundamental data on the energy of super high-rise mixed-use housing by examining the characteristic of energy consumption of the complex which was built more than 5 years ago. There are 4 methods of this study. Firstly, it follows the steps of theoretical view, and defines concept to study on the characteristic of super high-rise mixed-use housing. Secondly, referring to the previous study, it provides better understanding on th stream of this research and the limit as well to guide the direction in terms of energy consumption. Thirdly, it evaluates the characteristic of monthly consumption by researching the use of electricity energy and heating energy of super high-rise mixed-use housing. The major conclusions of this study are as follows; Firstly, the heating use of apartment complex is same, which is not influenced by the type of the building. Secondly, the electricity use of super high-rise mixed-use housing is from 1,2 to 1.5 as high as the normal apartment.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.159-164
• /
• 2010

High-rising buildings are a sort of solution to recent cities. Till now real estate development was concentrated in new development on vacant lots, and it resulted urban sprawl. Generally large cities are confronted with the exodus of industry and population from city. High-rising buildings solve many problems associated with this problem. The purpose of this research is to identify the effect of super high-rise mixed use building project process on apartment price. For this study, the hypothesis is that price of apartments is influenced by project process of super high-rise mixed use building. The study concerned 4 variations of project process that is building permits stage, sale stage, construction starting stage and stage of moving into building. The target projects of buildings are selected by number of floor(over 40 floors) and construction time. And 48 apartment complex are selected around super high-rise mixed use building. This study uses hedonic price function to analysis effect of project process of super high-rise mixed use building. A price of apartments is defined as a dependent variable. Characteristics of residence, complex, district and super high-rise building are defined as independent variables. The results are as follows; first, there is no error in price model of this study. Second, it is found that apartment price was influenced negatively by building permit stage and sale stage of super high-rise mixed use building. But that was influenced positively by construction starting stage and stage of moving into building of that. Third, as the project process of super high-rise mixed use building was proceeded, price of apartments was increased.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.476-483
• /
• 2016

Super Wi-Fi is a Wi-Fi-like service exploiting TV white space (WS) which is expected to achieve larger coverage than today's Wi-Fi thanks to its superior propagation characteristics. Super Wi-Fi has been materialized as an international standard, IEEE 802.11af, targeting indoor and outdoor applications, and is undergoing worldwide field tests. This paper demonstrates the true potential of indoor Super Wi-Fi, by experimentally comparing the signal propagation characteristics of Super Wi-Fi and Wi-Fi in the same indoor environment. Specifically, we measured the wall and floor attenuation factors and the path-loss distribution at 770MHz, 2.401 GHz, and 5.540 GHz, and predicted the downlink capacity of Wi-Fi and Super Wi-Fi. The experimental results have revealed that TVWS signals can penetrate up to two floors above and below, whereas Wi-Fi signals experience significant path loss even through a single floor. It has been also shown that Super Wi-Fi mitigates shaded regions of Wi-Fi by providing almost-homogeneous data rates within its coverage, performs comparable to Wi-Fi utilizing less bandwidth, and always achieves better spectral efficiency than Wi-Fi. The observed phenomena imply that Super Wi-Fi is suitable for indoor applications and has the potential of extending horizontal and vertical coverage of today's Wi-Fi.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.344-349
• /
• 2021

This paper proposes a structure in which Trench SiO₂ is grown inside of Super Junction IGBT P-Pillar. When observing the electric field in 3D, we checked the region where the electric field have not affected inside of the P-Pillar. The pillar region's portion resistance is varied by the breakdown voltage and size of each pillar, which reduces the size by growing SiO₂ after trenching has no field effect inside of that. At 4.5kV the same breakdown voltage, it was confirmed that the On-state voltage drop improved by about 58%, 19% compared to Field Stop IGBT and conventional Super Junction IGBT.