• 수산해양기술연구
• /
• 제18권1호
• /
• pp.1-10
• /
• 1982

진해만은 여름철에 적조가 자주 발생하는 해역으로서 우리나라 남해안 중 해양 오염이 가장 문제시되고 있는 해역중 하나이다. 그러므로 오염된 마산만의 해수가 진해만으로 어떻게 유입, 희석되는가를 알아보고, 만외에서 유입되는 해수의 확산 이동을 조사하기 위하여 대조(1981년 8월 17일)와 소조(1981년 9월 7일) 각 조석에 따라 네 번에 걸쳐 Rhodamine B (중량비 6%) 확산실험을 실시하였다. 그 결과 대조 때 방출 90분 후의 썰물과 밀물 때의 확산계수는 각각 3.0$\times$10 super(3) cm super(2) /sec, 2.8$\times$10 super(3) cm super(2) /sec 이고 소조 때 방출 90분 후의 확산 계수는 밀물 때는 6.2$\times$10 super(2) cm super(2) /sec, 썰물 때는 2.1$\times$10 super(3) cm super(2) /sec로서 소조 때보다 대조 때 더 크게 나타났으며, 다른 해역과 비교해 보면 수영만의 8.2$\times$10 super(2) cm super(2) /sec, 1.12$\times$10 super(3) cm super(2) /sec(Kim: 1981)와 그 값이 거의 비슷하나, 고리에서의 10 super(3) ~10 super(4) cm super(2) /sec(Ro: 1980)보다는 매우 적게 나타났다. 진해만 및 마산만의 경우, 만 입구가 협소하고 남쪽으로 열려 있어서 여름철에 남풍계열의 바람이 강하게 불면 썰물 때라도 표층수가 역류하여 만으로 들어오기 때문에, 특히 소조 때에는 오염물질의 분산이 잘 되지 않고 누적될 가능성이 크게 보인다.

• 한국정밀공학회지
• /
• 제29권2호
• /
• pp.161-169
• /
• 2012

Recently, a study for the functional surface production of super hydrophobic of natural and biomimetic artificial has attracted much attention. To make process methods of super hydrophobic surface has a variety of ways such as lithography, etching, and laser ablation. However, we were used ultra-shot pulse laser ablation process which has the virtue of more environmental friendliness and simple process. In this paper, we were fabricated a multiplicity of super hydrophobic patterns on mold surface(NAK80) using by optimizing the laser processing conditions and it was transferred on PDMS. Also, we measured contact angle super hydrophobic patterns on PDMS. The result showed there is no patterns on PDMS were measured 94 degrees, by contrast, optimized super hydrophobic patterns on PDMS was 157 degrees. Therefore we fabricated super hydrophobic surface on mold. Based on these experimental results, it is possible to mass production using ultra shot pulse laser ablation of super hydrophobic pattern and to be applied for a variety of industries.

• 한국연초학회지
• /
• 제17권2호
• /
• pp.139-148
• /
• 1995

This study was carried out to investigate the effects of super heated steam on the physical and chemical changes of burley cut tobacco. Total sugar, total alkaloid, ether extracts, crude ash, total nitrogen and pH for leaf chemical constituents were analyzed. Filling power and fineness index for physical properties, and carbonyl compounds, phenol compounds, amonia, pH, hydrogen cyanide nicotine, carbon monoxide, total volatile base and tar for smoke components were also analyzed. The cut tobacco treated with super heated steam showed significant decrease in total sugar and total alkaloid. The filling power of the sample treated with the super heated steam system was increased abruptly when heated at over 250℃. The fineness index showed similar tendency to that of common toast method. Super heated steam treatment slightly decreased carbonyl compounds, phenol compounds, hydrogen cyanide, nicotine, carbon monoxide and tar in the tobacco. Especially the decrease of ammonia was the most remarkable. The pH of smoke was a little different compared with that in the common toast. The sensory test results showed that, compared to the common conveyer moving system, the tobacco treated with super heated steam system brought out more roasted flavor, lowered impact, irritation, and sting, further improved aftertaste, and lowered bitterness. The super heated steam treatment method used in the studies is expected to give better filling power, mild taste and toasted odor of tobacco than that of the common method for toast treatment. Key words : burley tobacco, super heated steam, expansion, toast.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.32-37
• /
• 2005

We developed a numerical simulator in order to study the Super-RENS/ROM (Super REsolution Near-Field Structure, Read Only Memory) using 3-dimensional FDTD (finite difference time domain) method. The simulation can be performed by three steps. In the first step, we utilized the vector-diffraction theory to calculate the characteristics of incident laser beam from the object-lens to the surface of the disk. At the second step, we fed the calculated result as an input for the main FDTD simulations on the optical layers in the disk structure. After performed the FDTD simulations, we took near-to-far field transformation for the reflected signal, from the surface of the disk to the detector. Finally, we can get reflected signal at the photo-diode. Using this developed simulator, we were able to study about the reading signal from various disk structures as a function of a laser beam position. We calculated reading signals for various pit sizes for Super-ROM structure, and it is found that the simple optical diffraction theory can not explain the reading mechanism of Super-ROM, and more complicated temperature dependent physics must be involved.

• 한국주거학회논문집
• /
• 제14권6호
• /
• pp.147-154
• /
• 2003

This study examines and analyzes the current status, characteristics and properties of Super-Graphic as a visual element with Super Graphic designed on the wall of apartment housing, typifies them and explains the preference and evaluative structure by each type. The results of this study are as follows： According to color environment of Super-Graphic, N-tone colors are 21.4％ and YR-tone colors are 14.5％. In the whole distribution, cold color tone is 41.4％ and warm color tone is 37.2％. In the brightness, 72.9％ of the entire Super Graphic use high brightness and in the saturation, 51.2％ show low saturation, achromatic colors are 21.4％ and high saturation is 16.5％. As a result of conducting SD test to analyze the preference of Super-Graphic, 'wonderful' is most negative variable, followed by 'heterogeneous', 'splendid', 'romantic' variety'. Positive variables are 'monotone', 'stable' and 'calm'. As a result of factor analysis to reveal the evaluative structure of Super Graphic image based on the above results, five factors including brightness, saturation, stability, harmony and ordered are extracted and it is considered that these are important variables to be reflected in designing Super Graphic in future.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권4호
• /
• pp.29-33
• /
• 2019

2G HTS wire with high engineering current density is desired for applications where compact, high power density superconducting equipment is important. We have succeeded in enhancing engineering current density of commercial SuperOx 2G HTS wire based on GdBCO by increasing the HTS layer thickness without fast degradation of the HTS film microstructure. This was possible after improving the temperature uniformity along the HTS film deposition zone. In particular, the wire engineering current density was increased from 700-770 A/㎟ (for a 65 ㎛-thick wire without stabilisation) or 430-480 A/㎟ (for a 105 ㎛-thick stabilised wire) at the beginning of this study to almost 1200 A/㎟ (for a 67 ㎛-thick wire without stabilisation) or 770 A/㎟ (for a 107 ㎛-thick stabilised wire) at completion of this study.

• 정보저장시스템학회논문집
• /
• 제2권2호
• /
• pp.138-143
• /
• 2006

We developed a numerical simulator in order to study the Super-RENS/ROM (Super REsolution Near-Field Structure, Read Only Memory) using 3-dimensional FDTD (finite difference time domain) method. The simulation can be performed by three steps. In the first step, we utilized the vector-diffraction theory to calculate the characteristics of incident laser beam from the object-lens to the surface of the disk. At the second step, we fed the calculated result as an input for the main FDTD simulations on the optical layers in the disk structure. After performed the FDTD simulations, we took near-to-far field transformation for the reflected signal, from the surface of the disk to the detector. Finally, we can get reflected signal at the photo-diode. Using this developed simulator, we were able to study about the reading signal from various disk structures as a function of a laser beam position. We calculated reading signals for various pit sizes for Super-ROM structure, and it is found that the simple optical diffraction theory can not explain the reading mechanism of Super-ROM, and more complicated temperature dependent physics must be involved.

• Smart Structures and Systems
• /
• 제30권3호
• /
• pp.287-301
• /
• 2022

The machine-vision based structural displacement measurement methods are widely used due to its flexible deployment and non-contact measurement characteristics. The accuracy of vision measurement is directly related to the image resolution. In the field of computer vision, super-resolution reconstruction is an emerging method to improve image resolution. Particularly, the deep-learning based image super-resolution methods have shown great potential for improving image resolution and thus the machine-vision based measurement. In this article, we firstly review the latest progress of several deep learning based super-resolution models, together with the public benchmark datasets and the performance evaluation index. Secondly, we construct a binocular visual measurement platform to measure the distances of the adjacent corners on a chessboard that is universally used as a target when measuring the structure displacement via machine-vision based approaches. And then, several typical deep learning based super resolution algorithms are employed to improve the visual measurement performance. Experimental results show that super-resolution reconstruction technology can improve the accuracy of distance measurement of adjacent corners. According to the experimental results, one can find that the measurement accuracy improvement of the super resolution algorithms is not consistent with the existing quantitative performance evaluation index. Lastly, the current challenges and future trends of super resolution algorithms for visual measurement applications are pointed out.

• 정보저장시스템학회논문집
• /
• 제4권1호
• /
• pp.1-5
• /
• 2008

Super-resolution near-field structure (super-RENS) technology and solid immersion lens (SIL) based near-field (NF) technology have been expected as promising approaches to increase data capacity or areal density of optical disc. Super-RENS technology has been studied until now using mainly numerical aperture (NA) of 0.85 far-field optical system and possibility of tangential data density increment have been presented. NF technology has been studied with NA over 1 and presented demonstration of removable performance. To achieve much higher density, approach to increase NA of super-RENS by NF technology (Near-Field Super-Resolution, NFSR) can be a candidate and we think this technology would be advantageous compared to wavelength reduction or much higher NA increment of NF technology or much smaller effective optical spot size reduction of far-field super-resolution technology. In this paper we present readout result of ROM media having monotone pits using NF optical system with wavelength of 405nm and NA of 1.84 surface type SIL. GeSbTe material was used for super resolution active layer and pit length is 37.5nm which is shorter than resolution limit 55nm. We present the feasibility of NFSR technology by confirming the CNR threshold according to readout power (Pr) and CNR 33dB over threshold Pr.

• 한국융합학회논문지
• /
• 제11권8호
• /
• pp.7-13
• /
• 2020

기상과 기후는 인간의 생활과 밀접하게 연관되어 있다. 특히 고해상도 기상 데이터를 활용하여 정밀한 연구나 실생활에 유용한 서비스가 가능하므로, 고해상도 기상·기후 데이터를 생산해야할 필요성이 증가하고 있다. 기존의 고해상도 기상 데이터는 적절한 보간법에 따라 데이터를 생산하지만, 본 논문에서는 SRCNN을 이용하여 기온 데이터를 초해상화 하는 방안을 제안한다. 기온 데이터 초해상화에 가장 적절한 SRCNN 모델을 구축하고, 기온 데이터를 초해상화 한다. 결과 데이터를 평가하기 위해 역거리 가중법을 이용하여 비 관측 지점에 대한 기온을 구하고, 제안한 방법을 적용한 기온 데이터와 보간법을 이용한 기온 데이터를 비교한다. 비교 결과, 기온 데이터를 초해상화하기 위한 적절한 SRCNN 모델을 구축하였고, 제안한 방법이 보간법을 이용한 방법보다 약 10.8% 더 높은 예측 성능을 보였다.